• 대한기계학회논문집B
• /
• 제21권7호
• /
• pp.862-872
• /
• 1997

Ice formation in a horizontal circular cylinder has been studied numerically. From the numerical analysis results, it was found that there were three types of freezing pattern and that freezing phenomenon was affected largely by density inversion and cooling rate. The type of freezing pattern largely depends on the secondary flow which is generated by density inversion. When supercooling energy is released before the development of the secondary flow, the annular ice layer grows. If the energy is released when the secondary flow is considerably developed and the supercooled region is removed to the upper half part of the cylinder, an asymmetric ice layer grows. And if the energy is released after perfect development of the secondary flow, instantaneous dendritic ice formation over the full region occurs. Furthermore, this secondary flow was found to have an effect on heat transfer characteristics. The heat transfer rate becomes small at the instant when the secondary flow is generated, but becomes large with the development of the flow. It's concluded that for the facilitation of heat transfer it is desirable to keep water in liquid phase until the secondary flow is perfectly developed. This study gave an instruction of performance improvement of capsule type ice storage tank.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.167-173
• /
• 2004

The amount of cesium released from the leaching of spent fuels in contact with and without the compacted bentonite bloc]t which was compacted as the density of $1.4g/\textrm{cm}^3$, up to 5.7 years were measured and the empirical formula of the fractional release rate of cesium were derived from these measured values. The empirical formulas show that the long-term release rate of cesium under a repository would become a constant, as about $3{\times}10_{-6}$ fraction/day, after a certain period. The cumulative fractions of cesium released from the spent fuel with bentonite and with copper and stainless steel sheets were steadily increased, but the fraction from bare fuel was rapidly increased and then sluggishly increased. However, the remained value except its gap inventory from the cumulative fraction of cesium released from bare fuel was almost very close to the others. This suggests that the initial release of cesium from bare fuel might be dependant on its gap inventory.

• Journal of Radiation Protection and Research
• /
• 제29권3호
• /
• pp.157-163
• /
• 2004

원자력시설에서 만일의 방사성 물질의 누출이나 화학시설에서 독성물질의 누출시 오염물질의 환경 중 거동을 파악하기 위해서 대기확산 모형이 많이 이용된다. 대기확산 모형을 통한 환경 중 유해물질의 농도 예측에 대한 정확도를 높이기 위해서는 무엇보다 모형으로 입력되는 선원항에 대한 정확한 정보를 필요로 한다. 본 연구는 이러한 선원항 추정을 위하여 최소자승법을 적용하였다. 영광원자력 시설에서 실시된 추적자 확산실험 자료를 이용하여 가우시안 모형으로 계산한 값과 비교를 시도하였으며, 가우시안 모형으로 계산한 값들과 추적자 확산실험 결과 값들의 오차의 제곱이 최소가 되도록 선원항을 추정하였다. 추정한 선원항은 확산실험시 실제추적자 방출량의 1.24정도로 비교적 정확한 예측력을 나타내었다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.77-84
• /
• 1997

Cone calorimeter measurements can be used for the calculation of effective material properties, which can be used as input parameters in modeling of fire. Main parameter measured in Cone calorimeter is heat release rate. Some other parameters as time to ignition, effective heat of combustion, mass loss rate or total heat released is also measured in Cone calorimeter. Total heat released is important from the point of view of total energy available in material in Fire situation. Cone calorimeter. measurements were done on several wood species (oak, beech, spruce, poplar). Measurements were provided at external irradiances 30, 50 and 65 ㎾/$m_2$ in horizontal orientation. Heat release rate data were evaluated and compared as a function of external irradiance for various species of wood. furthermore the influence of external irradiance on effective heat of combustion and total heat release was also evaluated for the period of flame combustion.

• 대한기계학회논문집B
• /
• 제31권10호
• /
• pp.860-867
• /
• 2007

Heat pump drying has a great potential for energy saving due to its high energy efficiency in comparison with conventional air drying. In the present study, the performance simulation for the basic design of a heat pump dryer has been carried out. The simulation includes one-stage heat pump cycle, simple drying process using the drying efficiency. As an example, the heat pump cycle with Refrigerant 134a has been investigated. For the operating conditions such as the average temperature of the condenser, the heat rate released in the condenser, the flow rate of drying air, and drying efficiency, the simulation has been carried out to figure out the performance of the dryer. The parameters considered in the design of the dryer are COP, MER, SMER, the rate of dehumidification, the temperature and humidity of drying air and those parameters are compared for different conditions after carrying out the simulation.

• Nuclear Engineering and Technology
• /
• 제34권3호
• /
• pp.242-249
• /
• 2002

The relationship between the tritium release rate from the nuclear power plant and tritium concentration in the environment around the Kori site was modeled. The tritium concentration in the atmosphere was calculated by multiplying the release rates and $\chi$/Q values, and the d3V deposition rate at each sector according to the direction and the distance was obtained using a dry deposition velocity. The area around Kori site was divided into 6 zones according to the deposition rate. The six zones were divided into 14 compartments for the numerical simulation. Transfer coefficients between the compartments were derived using site characterization data. Source terms were calculated from the dry deposition rates. Tritium concentration in surface soil water and groundwater was calculated based upon a compartment model. The semi-analytical solution of the compartment model was obtained with a computer program, AMBER. The results showed that most of tritium deposited onto the land released into the atmosphere and the sea. Also, the estimated concentration in the top soil agreed well to that measured. Using the model, tritium concentration was predicted in the case that the tritium release rates were doubled.

• KIEAE Journal
• /
• 제13권4호
• /
• pp.49-54
• /
• 2013

released by IEA, 2010, indicated that Korea's GDP, of 8 countries surveyed-Korea, Frans, Germany, Italy, Japan, the UK, the USA, and Australia-was the lowest, but the electric consumption per head was third, following America and Australia. Thus, our government has been striving to reduce energy usage and especially to lessen the energy used in buildings, proposing a variety of road maps such as 'building energy efficiency rating' and 'energy saving design standards of buildings'. Accordingly, this study investigated the effect of the items of machine part among EPI items on the energy saving rate. I measured energy usage by ECO2 program, for simulation program, that is used for the building energy efficiency rating. Result showed that items concerning control of pumps and fans had much more saving rate than the ones concerning efficiency of heater and cooler that had bigger scores assigned among EPI items. Result showed that items concerning control of pumps and fans had much more saving rate than the ones concerning efficiency of heater and cooler that had bigger scores assigned among EPI items. Therefore, I think that grades assigned to items in energy performance index need to be corrected.

• 신재생에너지
• /
• 제20권1호
• /
• pp.175-181
• /
• 2024

This study analyzed the hydrogen conversion rate and microbial community in conjunction with changes in carbohydrate concentration during hydrogen fermentation using food waste, and presented comprehensive research results for the condition 80 g Carbo COD/L, which showed the highest efficiency with a carbohydrate removal rate of 98.1% and a hydrogen conversion rate of 1.76 mol H₂/mol. The microbial community analysis found that Clostridium sp., widely known as a hydrogen-producing microorganism, was released in 80 g Carbo COD/L and confirmed that it was a dominant species at 98.1%. Conversely, in 100 g Carbo. Under COD/L conditions, Leuconostoc sp. showed the maximun prevalence, which is believed to hinder hydrogen production.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권3호
• /
• pp.182-190
• /
• 2017

모든 액체는 소량의 기체성분들이 녹아있으며, 액체에 용해되는 기체의 양은 액체에 작용하는 주위압력에 기여하는 각 기체성분의 분압에 비례한다는 헨리의 법칙을 따른다. 따라서 다단증발식 해수담수화설비의 경우, 각 증발단의 운전온도와 압력은 다르며, 이 운전조건에 비례하여 해수에 용해되어 있던 기체들이 증발과정에서 방출되는데 주성분은 불응축기체인 이산화탄소, 질소, 산소 및 아르곤이다. 대류열전달의 입장에서는 불응축기체는 증발증기를 응축시키는 냉각기의 성능을 저하시키는 주요한 원인이기 때문에 증발과정에서 방출되는 불응축기체의 평가는 증발식 해수담수화설비에서 중요한 설계인자 중의 한가지이다. 증발식 해수담수화공정의 경우, 대부분의 증발기는 진공압력으로 유지되기 때문에 진공유지장치의 설계를 위해서는 증발과정에서 해수로부터 방출되는 불응축기체의 방출량을 평가하는 것이 매우 중요다. 본 연구는 불응축기체의 방출량을 정량적으로 계산하기 위해 수행하였으며, 연구결과에 따르면 불응축가스의 방출량은 후단으로 갈수록 감소하며, 담수생산량에 비례함을 알 수 있었다.

• 한국태양에너지학회 논문집
• /
• 제22권1호
• /
• pp.9-21
• /
• 2002

To develope chemical heat pump using available energy sources, solar heat and other kinds of waste thermal energy, we have studied the heat transfer rate in cylindrical bed reactor packed with calcined Dolomite. Two dimensional (radial and circumferential) Partial differential equations, concerning heat and mass transfer in packed bed of calcined Dolomite, are solved numerically to describe the characteristics of the reaction of calcined Dolomite and heat transfer. The results obtained by numerical analysis about two dimensional profiles of temperature and conversion of reactant in the packed bed reactor and the amount of exothermic heat released from the reactor are follows. It was found that all of calcined Dolomite packed bed kept the reaction temperature of about 750K throughout the entire part of the bed, immediately after the steam was introduced exothermic reaction of hydration was proceeded from the packed bed inpu to output and from wall side to center. The rate of thermochemical reaction depends on the temperature and concentration and it is also governed by the boundary conditions and heat transfer rate in the particle packed bed.