• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.514-527
• /
• 2018

This study formed a scenario to improve a water quality by expecting and analyzing a water quality of Jeollabuk-do Seomjingang water system, so calculated a result. As a result, it was analyzed that a water quality is improved at 15.32 % of the maximum BOD, 7.17 % of T-N, and 62.86 % of T-P according to domestic and livestock cut amount by reinforcing discharge water of sewage disposal plant and improving pollutant management plans. It was analyzed that supplementing various cut plans such as establishment of efficient cut plans, plans to decrease pollution loading amount, plans to increase sewage disposal efficiently, pollutant decrease through an expansion of sewage disposal area, and energy recovery from animal dung of Total Pollutant Load Management System, and developing a study on more efficient improvement plans of water quality by considering natural increase and economic development are efficient in an improvement in a water quality.

• Tribology and Lubricants
• /
• v.37 no.3
• /
• pp.91-98
• /
• 2021

This paper presents a hydrostatic bearing design and rotordynamic analysis of a turbo expander for a hydrogen liquefaction plant. Th~e turbo expander includes the turbine and compressor wheel assembled to a shaft supported by two hydrostatic radial and thrust bearings. The rated speed is 75,000 rpm and the rated power is 6 kW. For the bearing operation, we use pressurized air at 8.5 bar as the lubricant that is supplied to the bearing through the orifice restrictor. We calculate the bearing stiffness and flow rate for various gauge pressure ratios and select the orifice diameter providing the maximum bearing stiffness. Additionally, we conduct a rotordynamic analysis based on the calculated bearing stiffness and damping considering design parameters of the turbo expander. The predicted Cambell diagram indicates that there are two critical speeds under the rated speed and there exists a sufficient separation margin for the rated speed. In addition, the predicted rotor vibration is under 1 ㎛ at the rated speed. We conduct the operating test of the turbo expander in the test rig. For the operation, we supply pressurized air to the turbine and monitor the shaft vibration during the test. The test results show that there are two critical speeds under the rated speed, and the shaft vibration is controlled under 2.5 ㎛.

• Journal of Forest and Environmental Science
• /
• v.38 no.1
• /
• pp.38-47
• /
• 2022

Hymenodictyon orixensis (Roxb.) Mabberley (locally known as Bhutum in Bangladesh) is both an ecologically and economically valuable multipurpose tree species for afforestation and reforestation programs in Bangladesh. Seed germination and seedling development study of H. orixense were conducted to find out the response to different growing medium, e.g., polybag (15×10 cm (T₀) and 20×15 cm (T₁)), sand medium in propagator house (T₂), conventional nursery bed (T₃), and root trainer (T₄) in the Nursery. Consequently, germination behavior and seedling morphological parameters of H. orixense were assessed. The results revealed that the sand medium of the propagator house (T₂) provided the highest germination % (58.57±22.30) and the highest germination energy (11.43±2.43) followed by seedlings growing in 20×15 cm polybags (T1) containing forest topsoil and cow-dung at a ratio of 3:1. Except for germination energy, germination values, and germination capacity, other seed biology parameters, particularly imbibition, germination period, germination rate, and plant survival percent in T₁, T₂, T₃, and T₄ were significantly (p<0.05) different from T₀. Each phenotypic parameter of seedlings and dry matter of shoot and root significantly differed from control except root length (p<0.992). Based on this study, Polybags of 20×15 cm size are regarded as the best medium for quality seedling development of H. orixense. The nursery bed (T₃) had the lowest germination performance and developed more inferior quality seedlings. Thereby, 20×15 cm size of polybags with conventional soil and cow-dung media is recommended for maximum germination and to grow the quality seedlings of H. orixense in the Nursery.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.286-291
• /
• 2022

The effect of root-zone local cooling on seedling growth of tomato was investigated. Lower pipe cooling was used for local cooling of the root zone, and the root zone temperature was set at 20 and 25℃. There was no difference in plant height, root length, and leaf number according to local cooling temperature. Leaf area, fresh weight, dry weight, and chlorophyll content of the shoot and root was higher in the 25℃ than those of 20℃ at 28 DAS. These results showed that cooling for seedling growth of tomato 25℃ is sufficient considering energy efficiency. This study will be helpful in the development of local cooling technology that can reduce the energy required for cooling during the production of tomato seedlings in the high temperature season.

• Korean Journal of Agricultural Science
• /
• v.49 no.3
• /
• pp.547-560
• /
• 2022

The present study investigated the effects of dietary supplementation of peanut shell extract on the growth performance and physiological properties of broiler chicks. Two diet energy levels (Positive and Negative) and four additives (0.0, 0.05, and 0.1% peanut shell extract and commercial antioxidant) were factorially arranged for eight treatments. The overall weight gain of the broilers was slightly improved at 0.05% for the antioxidant treatments regardless of the diet energy levels, but there was no statistical difference among the treatments (p > 0.05). The carcass characteristics of the broilers, such as cooking loss, crude protein content, antioxidant activity, and thiobarbituric acid reactive substances (TBARS) values, were improved by the feeding diets containing the 0.05% peanut shell extract. Furthermore, it was confirmed that the dietary supplementation of peanut shell extract did not have a negative effect on the immune responses of the broilers show by the lack of statistical differences in the liver and bursa Fabricious weight and cytokine level among the treatments. From the economic analysis, dietary supplementation of peanut shell extract significantly influenced the compensatory growth and food efficiency and, in turn, led to a decrease in the duration needed to reach 1.5 kg compared to the control. These results suggest the possibility that the peanut shell extract could be used as a functional feed additive by improving the growth performance and carcass characteristics with no detrimental effects on broilers.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.351-357
• /
• 1983

To study the relationships between soybean seed yield and meteorological elements, the investigation into the important agronomic characters of Bongeui cultivar and climatic factors such as precipitation, rainy days, and temperature from 1970 to 1981 was made. The results obtained were summarized as follows: 1) Coefficients of variabilities for pod-filling rate, seed yield, number of pods per plant, and seed weight were about 38%, 30%, 30%, and 5.5%, respectively. 2) Weather conditions mainly in July and August influenced soybean production. Particularly, high temperature played an important role in soybean yield reduction. 3) Correlation coefficients between maximum, minimum, or average temperature of July (and, in the case of August, maximum temperature only) and yield or seed weight, and between those of August and podfilling rate were significantly negative. 4) Regression equations between average temperature of July or maximum temperature of August and yield were Y=-42.46X +1200.86 and Y=-37.95X + 1210.42, respectively. 5) High temperature during the flowering stage affected soybean seed yield reduction significantly.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2802-2811
• /
• 2023

In a first-of-its-kind study, terrestrial radionuclide concentrations were measured in 35 topsoil samples from the outskirts of Dhaka using HPGe gamma-ray spectrometry to assess the radiological consequences of such a vast number of brick kilns on the plant workers, general as well as dwelling environment. The range of activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K is found at 19 ± 3.04 to 38 ± 4.94, 39 ± 5.85 to 57 ± 7.41, and (430 ± 51.60 to 570 ± 68.40) Bq/kg, respectively. ²³²Th and ⁴⁰K concentrations were higher than the global averages. Bottom ash deposition in lowlands, fly ash buildup in soils, and the fallout of micro-particles are all probable causes of the elevated radioactivity levels. ¹³⁷Cs was found in the sample, which indicates the migration of ¹³⁷Cs from nuclear accidents or nuclear fallout, or the contamination of feed coal. Although the effective dose received by the general public was below the recommended dose limit but, most estimates of hazard parameters surpass their respective population weighted global averages, indicating that brick kiln workers and nearby residents are not safe due to prolonged exposures to terrestrial radiation. In addition, the soil around sampling sites is found to be unsuitable for agricultural purposes.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.707-714
• /
• 2022

Hydrogen production using solid oxide electrolysis cells (SOEC) is a promising technology because of its efficiency, cleanness, and scalability. Especially, high-power SOEC system has received a lot of attention from researchers. This study compared and analyzed the low-power and high-power SOEC system in term of economic. By using revenue requirement method, levelized cost of hydrogen (LCOH) was calculated for comparison. In addition, the sensitivity analysis was performed to determine the dependence of hydrogen cost on input variables. The results indicated that high-power SOEC system is superior to a low-power SOEC system. In the capital cost, the stack cost is dominant in both systems, but the electricity cost is the most contributed factor to the hydrogen cost. If the high-power SOEC system combines with a nuclear power plant, the hydrogen cost can reach 3.65 $/kg when the electricity cost is 3.28 ¢/kWh and the stack cost is assumed to be 574 $/kW.

• Clean Technology
• /
• v.29 no.1
• /
• pp.53-58
• /
• 2023

This study shows the summary of the economic performance of excess electricity conversion to hydrogen as well as methane and returned conversion to electricity using a fuel cell. The methane production process has been examined in a previous study. Here, this study focuses on the conversion of methane to electricity. As a part of this study, capital expenditure (CAPEX) is estimated under various sized plants (0.3, 3, 9, and 30 MW). The study shows a method for economic optimization of electricity generation using a fuel cell. The CAPEX and operating expenditure (OPEX) as well as the feed cost are used to calculate the discounted cash flow. Then the levelized cost of returned electricity (LCORE) is estimated from the discounted cash flow. This study found the LCORE value was ¢10.2/kWh electricity when a 9 MW electricity generating fuel cell was used. A methane production plant size of 1,500 Nm³/hr, a methane production cost of $11.47/mcf, a storage cost of $1/mcf, and a fuel cell efficiency of 54% were used as a baseline. A sensitivity analysis was performed by varying the storage cost, fuel cell efficiency, and excess electricity cost by ±20%, and fuel cell efficiency was found as the most dominating parameter in terms of the LCORE sensitivity. Therefore, for the best cost-performance, fuel cell manufacturing and efficiency need to be carefully evaluated. This study provides a general guideline for cost performance comparison with LCORE.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.725-733
• /
• 2023

The Korea Institute of Radiological and Medical Sciences has started a radiation epidemiological study, titled "Korean Radiation Worker Study," to evaluate the health effects of occupational exposure to radiation. As a part of this study, we investigated the methodologies and results of reconstructing organ-specific absorbed doses based on personal dose equivalent, H_p(10), reported from 1984 to 2019 for 20,605 Korean radiation workers. For the organ dose reconstruction, representative exposure scenarios (i.e., radiation energy and exposure geometry) were first determined according to occupational groups, and dose coefficients for converting H_p(10) to organ absorbed doses were then appropriately taken based on the exposure scenarios. Individual annual doses and individual cumulative doses were reconstructed for 27 organs, and the highest values were observed in the thyroid doses (on average 0.77 mGy/y and 10.47 mGy, respectively). Mean values of individual cumulative absorbed doses for the red bone marrow, colon, and lungs were 7.83, 8.78, and 8.43 mSv, respectively. Most of the organ doses were maximum for industrial radiographers, followed by nuclear power plant workers, medical workers, and other facility workers. The organ dose database established in this study will be utilized for organ-specific risk estimation in the Korean Radiation Worker Study.