• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.9-11
• /
• 2009

It is well-known that the performance of turbo codes can be improved by allocating different energies per code symbol. In this paper, based on this observation, we propose a joint encoding and modulation scheme for quadrature amplitude modulated turbo code systems. In the proposed scheme, the amount of energy difference between the turbo coded symbols is optimized by optimizing the constellation of quadrature amplitude modulation(QAM). The proposed scheme offers better coding gain compared to the conventional combination of binary turbo code and QAM at the bit error rate of $10^{-5}$.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.12
• /
• pp.142-148
• /
• 1995

Sb ${\delta}$-doped Si layers were grown by Si MBE (Molecular Beam Epitaxy) system using substrate temperature modulation technique. The Si substrate temperatures were modulated between 350$^{\circ}C$ and 600$^{\circ}C$. The doping profile was as narrow as 41$\AA$ and the doping concentration of up to 3.5${\times}10^{20}cm^{3}$ was obtained. The film quality was as good as bulk material as verified by RHEED (Reflected High Energy Electron Diffraction), SRP (Spreading Resistance Profiling) and Hall measurement. Since the film quality is not degraded after the growth a Sb ${\delta}$-doped Si layer, the ${\delta}$-doped layers can be repeated as many times as we want. The doping technique is useful for many Si devices including small scale devices and those which utilize quantum mechanical effects.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.491-498
• /
• 2008

In this paper a decoupled control of a doubly-fed induction machine(DFIM) feed by a matrix converter is presented. It provides a robust regulation of the stator side active and reactive powers by the direct and quadratic components of the stator current vector, presented in a line-voltage-oriented reference frame. In this case, the stator windings are directly connected to the line grid, while the rotor windings are supplied by this later through a matrix converter controlled by a space vector modulation technique. The proposed solution is suitable for both energy generation and electrical drive applications with restricted speed variation range.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.304-308
• /
• 2009

This paper proposes a new concept of a signal constellation of the recently introduced half-symbol-rate-carrier phase-shift keying (HSRC-PSK) modulations for bandwidth-efficient high speed data communications. Since the HSRC-PSK modulations contain different symbol energies representing the same bit sequences due to the loss of orthogonality of their HSRC signals, it is very hard to represent the symbol using the conventional signal constellation. To resolve the problem, two different energies are assigned to represent one symbol for the HSRC offset quadrature phase shift keying (OQPSK) modulation. Similarly, the different energies exist to display the different symbol for HSRC minimum shift keying (MSK) modulation. With the proposed signal space representation, HSRC-PSK symbol can easily be shown with a two-dimensional scatter plot which provides helpful information of evaluating HSRC-PSK signal's quality.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.498-501
• /
• 2002

In the conventional PWM converter, high-frequency switching techniques was used for high-density of energy, but occurred a lot of problems such as switching losses, switching voltage/current stresses, EMI(Electromgnetic Interference) and so on. To overcome these problems, various soft switching techniques have been presented. However these techniques are focused on reducing switching losses and voltage/current stresses . The simulation and experimental results are shown that the active clamp ZVS flyback converter with the proposed RPWM(Random Pulse Width Modulation) technique reduces the conducted noise.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.179-182
• /
• 1994

We have investigated the optical and electrochromic properties of molybdenum oxide(MoO$_3$) films by thermal evaporation. The MoO$_3$films deposited at substrate temperatures below 200$^{\circ}C$ are found to be amorphous and annealed films at temperature 300$^{\circ}C$ for 1 hour in air are crystalline. The optical energy gap calculated from the transmittance and reflectance spectra of MoO$_3$ films is near 2.75 eV and 3.25 eV for amorphous films and crystalline films, respectively. The MoO$_3$ thin films exhibit light blue to dark blue optical modulation on lithium intercalation and have a uniform transmittance modulation over a wavelength range of 300∼1100 nmcompared to tungsten oxide films.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.59-65
• /
• 1999

There has been an interest to develop an efficient, compact microwave device using field-emitter-arrays (FEA)-based cathode. Toe valuate the optimum device-efficiency in a compact size, the propagation properties of the premodulated electron beam for the FEA-based cathode is studied in detail by the computer simulation using a PIC code, MAGIC. For the premodulated electron beam whose phase of the energy leads the phase of the current by $\pi$/2, the amplitude of the downstream current modulation can be kept as high as the initial modulation level. Using the beam parameters with the beam voltage of 6kV and the current of 2.0A, 30% of efficiency is predicted when the quality factor of 800 is chosen. the device length is reduced about twice compared with that of the conventional device. The design of practical planar cathode is carried out to meet the minimum diameter of the electron beam as 0.5 mm.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.44-55
• /
• 1993

In this paper, we proposed a new optical method for the efficient recognition of Korean characters. There are six filters in the proposed method which employed the concepts of amplitude-modulated phase-only filter(AMPOF) and spatial frequency modulation(SFM). Here, amplitude modulation is used to achieve improved correlation discrimination and SFM is to reduce the number of filters. We also used a simplified synthetic discriminant function(SDF) for distortion invariance of input image. In order to recognize the partial rotation invariant Korean characters, the proposed distortion invariant minimum average correlation energy (MACE) filter is synthesized SFM, partial rotation invariant filter (PRIF), AMPOF and MACE for partial rotation invariance in the frequency domain. The advantage of the proposed filters is to supress the sidelobes of cross correlation peak away from the autocorrelation peak and to produce sharp correlation peaks. We performed simulation and optical experiment for some of Korea characters using the proposed method. The results show that the proposed method has more improved discriminant ability and reduced processing time than the conventional methods.

• Journal of Power Electronics
• /
• v.13 no.1
• /
• pp.113-121
• /
• 2013

This paper introduces a simple core loss calculation method for output filter inductor in pulse width modulation (PWM) DC-AC inverter. Amorphous C-core (AMCC-320) is used to analyze the core loss. In order to measure core loss of the output filter inductor and validate the proposed method, a single-phase half-bridge inverter and a calorimeter are used. By changing switching frequency and modulation index (MI) of the inverter, core loss of the AMCC-320 is measured with the lab-made calorimeter and the results are compared with calculated core loss. The proposed method can be easily extended to other core loss calculation of various converters.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.30-34
• /
• 2008

In this paper, we analyze the performance of pulse position modulation-time hopping ultra wide band (PPM-TH UWB) systems with antenna diversity technique in indoor wireless channel. A modified Saleh and Valenzuela (SV) model is adopted as a UWB indoor channel model. Perfect synchronization between a transmitter and a receiver is assumed. Therefore, coherent equal gain combining (EGC) scheme to collect the energy available in the multipath components is investigated. It is shown that the performance is improved by increasing the number of antennas at the receiver. The results of this paper can be applied to the applications of UWB.