• Toxicological Research
• /
• v.29 no.1
• /
• pp.21-25
• /
• 2013

The selective targeting of an integrin ${\alpha}_v{\beta}_3$ receptor using radioligands may enable the assessment of angiogenesis and integrin ${\alpha}_v{\beta}_3$ receptor status in tumors. The aim of this research was to label a peptidomimetic integrin ${\alpha}_v{\beta}_3$ antagonist (PIA) with $^{99m}Tc(CO)_3$ and to test its receptor targeting properties in nude mice bearing receptor-positive tumors. PIA was reacted with tris-succinimidyl aminotriacetate (TSAT) (20 mM) as a PIA per TSAT. The product, PIA-aminodiacetic acid (ADA), was radiolabeled with $[^{99m}Tc(CO)_3(H_2O)_3]^{+1}$, and purified sequentially on a Sep-Pak C-18 cartridge followed by a Sep-Pak QMA anion exchange cartridge. Using gradient C-18 reverse-phase HPLC, the radiochemical purity of $^{99m}Tc(CO)_3$-ADA-PIA (retention time, 10.5 min) was confirmed to be > 95%. Biodistribution analysis was performed in nude mice (n = 5 per time point) bearing receptor-positive M21 human melanoma xenografts. The mice were administered $^{99m}Tc(CO)_3$-ADA-PIA intravenously. The animals were euthanized at 0.33, 1, and 2 hr after injection for the biodistribution study. A separate group of mice were also co-injected with 200 ${\mu}g$ of PIA and euthanized at 1 hr to quantify tumor uptake. $^{99m}Tc(CO)_3$-ADA-PIA was stable in phosphate buffer for 21 hr, but at 3 and 6 hr, 7.9 and 11.5% of the radioactivity was lost as histidine, respectively. In tumor bearing mice, $^{99m}Tc(CO)_3$-ADA-PIA accumulated rapidly in a receptor-positive tumor with a peak uptake at 20 min, and rapid clearance from blood occurring primarily through the hepatobiliary system. At 20 min, the tumor-to-blood ratio was 1.8. At 1 hr, the tumor uptake was 0.47% injected dose (ID)/g, but decreased to 0.12% ID/g when co-injected with an excess amount of PIA, indicating that accumulation was receptor mediated. These results demonstrate successful $^{99m}TC$ labeling of a peptidomimetic integrin antagonist that accumulated in a tumor via receptor-specific binding. However, tumor uptake was very low because of low blood concentrations that likely resulted from rapid uptake of the agent into the hepatobiliary system. This study suggests that for $^{99m}Tc(CO)_3$-ADA-PIA to be useful as a tumor detection agent, it will be necessary to improve receptor binding affinity and increase the hydrophilicity of the product to minimize rapid hepatobiliary uptake.

• Journal of Hospice and Palliative Care
• /
• v.7 no.2
• /
• pp.179-188
• /
• 2004

Purpose: The purpose of this study was to investigate the degree of fatigue and its related factors in cancer patients during chemotherapy. Methods: The subjects of this study consisted of 90 patients over 20 years old who were receiving chemotherapy at the injection room of the o.p.d. and ward admission care unit in a University hospital located in Gwang-ju city and data were collected from August 8th to October 2nd, 2002. Collected data were analysed using SPSS v 10.0. to obtain summary statistics for the descriptive analysis, t-test, ANOVA, pearson correlation, and multiple regression. Results: 1. Fatigue of the subjects was significantly correlated with physical distress score. and 6 items of subscale those were nausea, vomiting, anorexia, pain, and immobility, showed statistically significant correlation. 2. Fatigue of the subjects showed statistically significant differences according to a nap satisfaction. Fatigue of the subjects was significantly correlated with mood state, Also, all 5 items of subscale, which are those were anxiety, confusion, depression, energy, and anger showed statistically significant correlations. 3. Fatigue of the subjects showed statistically significant differences according to metastasis, chemotherapy cycle, post operation existence, post radiation therapy existence. There were significant negative correlation between fatigue and hematocrit and fatigue and weight change. There was no significant correlation between fatigue and spiritual well-being state. With the result to multiple regression, Immobility, Anorexia, Anger explained fatigue by, pain, and immobility showed statistically significant correlation.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.2
• /
• pp.239-249
• /
• 1999

The role of amino acids in culture media for IVF-ET was examined in a total of 76 cycles. Patients received clomiphene citrate (CC) followed by hMG or GnRH-a combined with gonadotropins (FSH/hMG) for controlled ovarian hyperstimulation. Severe male (<$4{\times}10^6$ motile sperm) or age factor (>39 y) patients were excluded in this study. Pregnancy was classified as clinical if a gestational sac or fetal cardiac activity was seen on ultrasound. No significant differences were found in age, duration of infertility, follicle size, the level of $E_2$ on the day of hCG injection, the mean number of oocytes retrieved, total motile sperm count, fertilization rate and the mean number of embryos transferred between bHTF (without amino acids) and mHTF (with amino acids) groups. However, total ampules of gonadotropins were higher (p<0.01) in mHTF group than bHTF group. Significantly (p<0.05) more clinical pregnancies were recorded in mHTF group (13/30) compared with bHTF group (9/46). The multiple pregnancy rates were 11.1% in bHTF group and 7.7% in mHTF group. There were one ectopic pregnancy in mHTF group and one heterotopic pregnancy in bHTF group. Abortion rates were 22.2% in bHTF group and 7.7% in mHTF, respectively. The ongoing pregnancy or livebirth rate was significantly (p<0.05) higher in mHTF group (12/30) than bHTF group (7/46). These results suggest that the addition of amino acids in culture media is essential for culture of zygotes in vitro and adjustment of energy substrates in phosphate-free culture media appears to be beneficial for human IVF-ET procedure.

• The Journal of Dong Guk Oriental Medicine
• /
• v.2 no.1
• /
• pp.19-54
• /
• 1993

To see both $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$(dissipate phlegm and promote vital energy circulation) and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$(blood circulation and disperse blood stasis) influencing on thrombosis, contusion-hyperemia, and hyperlipidemia, at first we measured the density of FDP, the quantity of fibrinogen, prothrombin time, and the number of platelet of rat taken thrombosis by endotoxin. Secondly we measured the increase-rate of "paw swelling", the number of platelet, the quantity of fibrinogen, and prothrombin time of rat taken contusion-hyperemia. And then we measured the quantity of total cholesterol in serum and of H.D.L-cholesterol and of triglyceride and of phospholipid and of ${\beta}-lipoprotein$, its weight, and the variation of the quantity of electrolyte of rat taken hyperlipidemia by the oral-injection of choleserol. As a result, we can conclude as follows : 1. Out of the test of thrombosis, we can recognize not only the noticeable increae of the number of platelet and the quantity of fibrinogen, but also the noticeable decrease of prothrombin time and the density of FDP in case of $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$-injected rat and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$-injected rat. 2. Out of the test of contusion-hyperemia, we can recognize not only the noticeable increase of the number of platelet and the quantity of fibrinogen, but also the noticeable decrease of prothrombin time and "increase-rate of paw swelling" in case of $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$-injected rat and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$-injected rat. 3. Out of the test of hyperlipidemia, at first we can recognize that test rat's weight increased as close as that of normal rat. And we can recognize the noticeable decrease of the triglyceride and phospholipid and ${\beta}-lipoprotein$." Also, in case of the variation of electrolyte we can recognize the decrease of calcium and potassium in $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$-injected rat, and of sodium and magnesium in $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$-injected rat. Thus, as the above-mentioned, in covering thrombosis, contusion-hypermia, and hyperlipidemia, the effect of $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$ and $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$ can be recognized. Granting that $Hu{\grave{a}}y{\bar{u}}t{\bar{a}}ng$ reveals its effectiveness in thrombosis and contusion-hyperemia, and $Sh{\grave{u}}nq{\grave{i}}daot{\acute{a}}nt{\bar{a}}ng$ in hyperlipidemia, it can be inferred that contusion-hyperemia is like "model of blood stasis form" as thrombosis and hyperlipidemia "phlegm-retention diseases form", and both phlegm-retention and blood stasis have correlation each other.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.248-254
• /
• 2016

Efficacious wastewater treatment is essential for increasing sewage sludge volume and implementing strict environmental regulations. The operation cost of sludge treatment amounts up to 50% of the total costs for wastewater treatment plants, therefore, an economical sludge destruction method is crucially needed. Amid several destruction methods, wet air oxidation (WAO) can efficiently treat wastewater containing organic pollutants. It can be used not only for sludge destruction but also for useful by-product production. Volatile fatty acids (VFAs), one of many byproducts, is considered to be an important precursor of biofuel and chemical materials. Its high reaction condition has instituted the study of gravity pressure reactor (GPR) for an economical process of WAO to reduce operation cost. Simulation of subcritical condition was conducted using Aspen Plus with predictive Soave-Redlich-Kwong (PSRK) equation of state. Conjointly, simulation analysis for GPR depth, oxidizer type, sludge flow rate and oxidizer injection position was carried out. At GPR depth of 1000m and flow rate of 2 ton/h, the conversion and yield of VFAs were 92.02% and 0.17g/g, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.126-132
• /
• 2016

This study numerically investigates the characteristics of chemical reactions and thermal deformation in a steam reformer. These phenomena are significantly affected by the high-temperature burner gas and the process gas conditions. Because the high temperature of the burner gas ranges from 800 to 1000 K, the reformer tubes undergo substantial thermal deformation, eventually resulting in structural failure. Thus, it is necessary to understand the characteristics of the reaction and thermal deformation under the operating conditions to evaluate the reformer tubes for sustainable, stable operation. Extensive numerical simulations were carried out using commercial CFD code (ANSYS FLUENT/MECHANICA Ver. 13.0) while considering three-dimensional turbulent flows and combined heat transfer including conduction, convection, and radiation. Structural analysis considering conjugated heat transfer between solid tubes and fluid flows was conducted using the Fluid-Solid Interaction (FSI) method. The results show that when the injection temperature of the process gas and burner gas decreased, the hydrogen production rate decreased significantly, and thermal deformation decreased by at least 15 to 20%.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.12
• /
• pp.1399-1408
• /
• 1999

Geometrical structures for the dimerization of (NO)₂ from (NO + NO) have been calculated using ab initio Har-tree-Fock (SCF), second-order Møller-Plesset perturbation (MP2), and coupled cluster with the single, double, and triple substitution [CCSD(T)] methods with a triple zeta plus polarization (TZP) basis set including diffuse Rydberg basis functions. The structure of (NO)₂ can be described by two interactions (N…N, N…O). One is the ONNO structure with an (N…N) interaction. In this structure, acyclic cis-ONNO with $C_{2v}$-symmetry, acyclic trans-ONNO with $C_{2h}$, and cyclic ONNO with trapezoidal structure ($C_{2v}$) are optimized at the MP2 level. The other structure is the ONON structure with an (N…O) interaction. In the structure, acyclic cis-ONON with Cs$^{-symmetry}$ and cyclic ONON of the rectangular ($C_{2h}$), square $(D_{2h})$, rhombic $(D_{2h})$, and parallelogramic $(D_{2h})$ geometries are also optimized. It is found that acyclic cis-ONNO (¹A₁) is the most stable structure and cyclic ONNO (³A₁) is the least stable. Acyclic trans-ONNO (³A₁) with an (N…N) interaction, acyclic trans-ONON and bicyclic ONON $(C_{2v})$ with (N…O) interaction, and acyclic cis- and trans-NOON with an (O…O) interaction can not be optimized at the MP2 level. Particularly, acyclic trans-ONNO with $C_{2h}$-symmetry can not be optimized at the CCSD(T) level. Meanwhile, acyclic NNOO (¹A₁, $C_s)$ and trianglic NNOO (¹A₁,$C_{2v})$ formed by the (O…N) interaction between O₂ and N₂ are optimized at the MP2 level. The binding energies and the relative energy gaps among the isomers are found to be relatively small./sec. Spiral CT scans during the arterial phase were obtained 35 seconds after the injection of contrast medium. CT findings of 78 lesions less than 4cm in diameter were correlated with angiographic findings. Results : The attenuation of lesions was high(n = 69), iso(n = 5), and low(n = 4) compared with liver parenchyma during the arterial phase of spiral CT. In lesions with high-, iso-, and low-attenuation during the arterial phase of spiral CT, hypervascularity on angiograms was found in 63 of 69(91.3%), three of five(60%), and three of four lesions(75%), respectively. Six lesions with high-attenuation on the arterial phase of spiral CT were not seen on angiography. Two iso-attenuated and one low-attenuated lesion were hypovascular on angiograms. Conclusion : The results of this study suggest that with some exceptions there was good correlation between the arterial phase of spiral CT and angiography.

• Tunnel and Underground Space
• /
• v.31 no.4
• /
• pp.270-288
• /
• 2021

We proposed a numerical method to simulate the hydro-mechanical behavior of rock fracture using a grain-based distinct element model (GBDEM) in the paper. As a part of DECOVALEX-2023 Task G, we verified the method via benchmarks with analytical solutions. DECOVALEX-2023 Task G aims to develop a numerical method to estimate the coupled thermo-hydro-mechanical processes within the crystalline rock fracture network. We represented the rock sample as a group of tetrahedral grains and calculated the interaction of the grains and their interfaces using 3DEC. The micro-parameters of the grains and interfaces were determined by a new methodology based on an equivalent continuum approach. In benchmark modeling, a single fracture embedded in the rock was examined for the effects of fracture inclination and roughness, the boundary stress condition and the applied pressure. The simulation results showed that the developed numerical model reasonably reproduced the fracture slip induced by boundary stress condition, the fracture opening induced by fluid injection, the stress distribution variation with fracture inclination, and the fracture roughness effect. In addition, the fracture displacements associated with the opening and slip showed good agreement with the analytical solutions. We expect the numerical model to be enhanced by continuing collaboration and interaction with other research teams of DECOVALEX-2023 Task G and validated in further study experiments.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.2
• /
• pp.1-12
• /
• 2023

In the current era of the global mobile smart device revolution, electronic devices are required in all spaces that people interact with. The establishment of the internet of things (IoT) among smart devices has been recognized as a crucial objective to advance towards creating a comfortable and sustainable future society. In-mold electronic (IME) processes have gained significant industrial significance due to their ability to utilize conventional high-volume methods, which involve printing functional inks on 2D substrates, thermoforming them into 3D shapes, and injection-molded, manufacturing low-cost, lightweight, and functional components or devices. In this article, we provide an overview of IME and its latest advances in application. We review biomimetic nanomaterials for constructing self-supporting biosensor electronic materials on the body, energy storage devices, self-powered devices, and bio-monitoring technology from the perspective of in-mold electronic devices. We anticipate that IME device technology will play a critical role in establishing a human-machine interface (HMI) by converging with the rapidly growing flexible printed electronics technology, which is an integral component of the fourth industrial revolution.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.23-32
• /
• 2020

Geological CO₂ sequestration is a global warming response technology to limit atmospheric emissions by injecting CO₂ captured on a large scale into deep geological formations. The presented results concern mineralogical and hydrogeological investigations (FE-SEM, XRD, XRF, and MICP) of mudstone samples from drilling cores of the Pohang basin, which is the research area for the first demonstration-scale CO₂ storage project in Korea. They aim to identify the mineral properties of the mudstone constituting the caprock and to quantitatively evaluate the hydrogeologic sealing capacity that directly affects the stability and reliability of geological CO₂ storage. Mineralogical analysis showed that the mudstone samples are mainly composed of quartz, K-feldspar, plagioclase and a small amount of pyrite, calcite, clay minerals, etc. Mercury intrusion capillary pressure analysis also showed that the samples generally had uniform particle configurations and pore distribution and there was no distinct correlation between the estimated porosity and air permeability. The allowable CO₂ column heights based on the estimated pore-entry pressures and breakthrough pressures were found to be significantly higher than the thickness of the targeting CO₂ injection layer. These results showed that the mudstone layers in the Yeongil group, Pohang basin, Korea have sufficient sealing capacity to suppress the leakage of CO₂ injected during the demonstration-scale CO₂ storage project. It should be noticed, however, that the applicability of results and analyses in this study is limited by the lack of available samples. For rigorous assessment of the sealing efficiency for geological CO₂ storage operations, significant efforts on collection and multi-aspect evaluation for core samples over entire caprock formations should be accompanied.