• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.133-143
• /
• 2007

This study was performed to evaluate the co- and sequential separation of Tc, Np and U from the simulated multi-component HLW solution by a TBP (tributyl phosphate)-TOA (tri- octyl amine)/NDD $(n-dodecane)-HNO_3$ extraction system. An optimal condition of (30% TBP-0.5% TOA)/NDD-1 M $HNO_3$ was selected by taking account of a prevention of the 3rd phase and effects of concentration of TBP, TOA and nitric acid on the co-extraction of Tc, Np and U. In that condition, the extraction yields were 81% (Tc), 85% (Np), less than 9% (Am and RE elements), about 8% (Pd), and less than 5% (other elements) so that the system developed for the co-extraction of Tc, Np and U was proved to be available. For that, however, more than 99% of Zr was found to be pre-removed. The co-extracted Tc, Np and U were sequentially separated in order of Tc(stripping agent : 5 M $HNO_3$)${\rightarrow}Np$ by reductive stripping (reductive-stripping agent : 0.1 M AHA)${\rightarrow}U$ (stripping agent : 0.01 M $HNO_3$), and then their separation factors were evaluated. At these conditions, 95% of Tc, 98% of Np and 99% of U could be recovered in each step.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.743-749
• /
• 1996

A new static contractor using capillary phenomena induced by a highly packed fiber bundle was developed for the solvent extraction. When two immiscible phases being cocurrently and forcedly fed into the packed fiber bundle, the contactor brings about a very large liquid-liquid contact area for mass transfer within a small definite space without any turbulence and drop phenomena. In order to test the characteristics and stability of the static contractor system, continuous extraction experiments of TBP-uranyl ion-nitric acid system were done and compared with the batch extraction experiment of the same chemical system. The performance of the static contractor were the same as that of the ideal batch extractor with the same extraction condition. For the increase of the extraction yield by the contactor, the increase of organic flow rate was required at a fixed aqueous flow rate, and a certain residence time of the aqueous phase flow within the contactor system had to be maintained to meet the performance of the batch system of the same phase ratio. The residence time in the case of TBP-uranyl ion-nitric acid system was about 1.9 minutes. This system was confirmed to be effective and stable enough for purposes of the kinetic study of solvent extraction as well as the mutual separation and purification of ordinary materials because of good reproducibility and the stable and large static liquid-liquid contact area.

• Food Science and Preservation
• /
• v.11 no.1
• /
• pp.88-93
• /
• 2004

This study was conducted in order to compare reflux extraction(RE) and microwave-assisted extraction(MAE) in extraction efficiency and establish optimum microwave extraction conditions in obtaining Aster scaber Thunb extracts. Extraction time was reduced considerably in MAE. When 70％ methanol, 50％ methanol, 70％ ethanol, or 50％ ethanol was used, no difference was found in the amount of soluble solid and total phenol between MAE and RE. The optimum microwave-assisted extraction conditions for Aster scaber Thunb were achieved by 120-150 watts of microwave energy and 4∼8 minutes of extraction time. No significant changes were found in antioxidant activity using DPPH scavenging method over the variation of microwave power or extraction time. The use of diluted methanol or ethanol improved soluble solid content(30.8％), total polyphenol content(2.9％) and antioxidant activity(69％ ).

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.259-269
• /
• 2021

The effects of the physicochemical properties of soil such as soil pH, cation exchange capacity, and organic matter content on single extraction of Cd, Cr, Cu, Ni, Pb, and Zn using CaCl2, HOAc, HNO3, and DTPA were statistically investigated for 69 agricultural soils in Korea. Correlation analysis and multiple regression analysis were applied for soil samples which were grouped on the basis of average values of the physicochemical properties of the soil. Diluted HNO3 extracted higher concentrations of Cr, Cu, Ni, and Pb when compared with the other extractants, however, similar amounts of Cd and Zn were extracted by HOAc with HNO3. The results of correlation analysis indicated that DTPA extraction showed a high correlation with other single and pseudo-total extraction methods, and the physicochemical properties of soil influenced the concentrations of heavy metals leached by the single extraction methods. In the case of Zn, high correlations between pseudo-total and the studied single extraction methods were observed. As a result of regression analysis, it was found that the physicochemical properties of the soil could explain up to 74% of variances of the single extraction results. These results indicate that the physicochemical properties of the soil can have a direct influence on the concentrations of heavy metals extracted by the single extraction methods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.5
• /
• pp.712-716
• /
• 2011

We investigated changes in the extraction yield and whitening activity of polysaccharides from Undaria pinnatifida sporophyll due to gamma irradiation. U. pinnatifida sporophyll was gamma-irradiated at doses of 10, 30, 50, 70, and 100 kGy, then extracted with hot water and precipitated with ethanol to extract polysaccharides. Crude polysaccharide yields increased with an increase in irradiation dosage, but tyrosinase inhibition activity did not change. Melanin synthesis did not significantly differ between B16BL6 cells treated with irradiated and non-irradiated samples. In conclusion, gamma irradiation increased the crude polysaccharide extraction yield but did not change the whitening activity of U. pinnatifida sporophyll. This implies that gamma irradiation can be used to increase yields in the cosmetic industry, thus increasing profits.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.2 no.2
• /
• pp.84-95
• /
• 2016

Considerably increasing interest in using the theranostic isotopes/ isotope pairs of radiometals like $^{44/47}Sc$ and $^{64/67}Cu$ for diagnosis and/or therapeutic applications in the nuclear medicine procedures necessitates its reliable production and supply. Separation and purification of no-carrier-added (NCA) isotopes from macro quantitates of the irradiated target matrix along with other impurities is a cardinal procedure amongst several other steps involved in its production. Multitudinous methods including but not limited to liquid-liquid (solvent) extraction, extraction chromatography (EXC), ion exchange, electrodeposition and sublimation are routinely applied either solitarily or in combination for the separation and purification of radioisotopes depending on their production routes, radioisotope of interest and impurities involved. However, application of EXC though has shown promises towards the numerous separation techniques have not received much attention as far as its application prospects in the field of nuclear medicine are concerned. Advances in the recent past for application of the EXC resins in separation and purification of the several medically important radioisotopes at ultra-high purity have shown promising behavior with respect to their operation simplicity, acidic and radiolytic stability, separation efficiencies and speedy procedures with the enhanced and excellent extraction abilities. In this mini review we will be talking about the recent developments in the application and the use of EXC techniques for the separation and purification of $^{44/47}Sc$ and $^{64/67}Cu$ for medical applications. Furthermore, we will also discuss the scientific and practical aspects of EXC in the view of separation of the NCA trace amount of radionuclides.

• Nuclear Engineering and Technology
• /
• v.31 no.5
• /
• pp.445-454
• /
• 1999

This work describes the adaptation of extractive scintillation by URAE $X^{TM}$ with a photon-electron rejecting alpha liquid scintillation (PERAL $S^{)}$ spectrometer to the analysis of uranium in aqueous samples. The extraction efficiency of the system was evaluated under varing chemical conditions including pH, and sample-cocktail volume ratio. Isotopic information from the (PERAL $S^{)}$ spectrum of natural uranium was obtained using a curve fitting routine. Comparisons of the result with that obtained from alpha spectrometry method using ion implanted silicon detector showed good agreement.t.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.178-186
• /
• 2021

The wave power extraction by multiple Wave Energy Converters (WECs) deployed in a Y-shaped Water Channel Resonator (WCR) has been investigated. A WCR consists of a long water channel, and a V-shaped wave guider installed at the entrance of a water channel. If the period of the incident waves coincides with the natural periods of the fluid in a WCR, resonance occurs, as a result, the internal fluid in a WCR is greatly amplified. To estimate the wave power by multiple WECs placed at the antinodal points in a WCR, the heave motion response, time-averaged power, and capture width ratio were calculated for several design parameters. Also, the systematic model tests were conducted in a 2D wave tank. The numerical results are in good agreement with the experimental data. It was verified that a WCR helps the WECs to produce electricity more effectively by amplifying the wave energy in a WCR.

• Progress in Superconductivity
• /
• v.10 no.2
• /
• pp.69-73
• /
• 2009

For extraction of the self-energy from the angle resolved photoemission spectroscopy(ARPES) experiments for the cuprate superconductors, the momentum distribution curve(MDC) analysis is commonly used. There are two requirements for this method to work: the self-energy is momentum independent and the bare electron dispersion is known. Assuming that the first condition is satisfied in the cuprates, we checked the effects of the bare dispersion on the extracted self-energy. For this, we first generated the ARPES intensity using the tight-binding band of the B2212 by solving the Eliashberg equation. We then extracted the self-energy from the theoretically generated ARPES intensity using the linear and quadratic dispersions. By choosing the bare dispersion such that the Kramer-Kronig relation is best satisfied between the real and imaginary parts of the extracted self-energy, we confirmed that the quadratic dispersion is better for the bare electron band for Bi2212. The self-energy can be reasonably extracted from the ARPES experiments using the MDC analysis.

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.4
• /
• pp.54-62
• /
• 2016

This study presents an approach of tidal farming optimization using a numerical modelling method to simulate tidal energy extraction for 1MW scale tidal stream devices around Jangjuk-sudo, South Korea. The utility of the approach in this research is demonstrated by optimizing the tidal farm in an idealized scenario and a more realistic case with three scenarios of 28-turbine centered tidal array (named A, B and C layouts) inside the Jangjuk-sudo. In addition, the numerical method also provides a pre-processing calculation helps the researchers to quickly determine where the best resource site is located when considering the position of the tidal stream turbine farm. From the simulation results, it is clearly seen that the net energy (or wake energy yield which includes the impacts of wake effects on power generation) extracted from the layout A is virtually equal to the estimates of speed-up energy yield (or the gross energy which is the sum of energy yield of each turbine without wake effects), up to 30.3 GWh/year.