• 한국염색가공학회지
• /
• 제21권3호
• /
• pp.19-25
• /
• 2009

Polymerization of tetraethoxysilane on a glass substrate was investigated by remote microwave plasma using argon with portions of nitrous oxide as carrier gas. Transparent layer like a thickness of 0.5 ${\mu}m$ 3 ${\mu}m$ were obtained, differing in chemical composition, depending on plasma power and treatment time as well as on ageing time. In general the milder the treatment and the shorter the ageing was, the higher was the content of organic structural elements in the layer. We have identified that the chemical structure of our samples composed of mainly Si O and Si C groups containing aliphatics, carbonyl groups. These results were obtained by X ray photon spectroscopy, Fourier transformed infrared spectroscopy, and scanning electron microscope combined with Energy dispersive X ray spectroscopy.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 추계 학술논문발표회 논문집
• /
• pp.173-177
• /
• 1998

In this paper, we reported an outbreak of fire hazard of ballast for fluorescent lamp. The surface structure and composition of ballast coil analyzed by using metallurgical microscope, scanning electron microscope(SEM) and energy dispersive x-ray spectroscopy(EDX). The surface of molten mark appeared columnar structure and void. EDX analysis indicated that the molten mark spectra were composed not only of the corresponding original spectra but also of several new lines.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.164-164
• /
• 2008

금속배선공정에서 높은 전도율과 재료의 값이 싸다는 이유로 최근 Cu를 사용하였으나, 디바이스의 구조적 특성을 유지하기 위해 높은 압력으로 인한 새로운 다공성 막(low-k)의 파괴와, 디싱과 에로젼 현상으로 인한 문제점이 발생하게 되었다. 이러한 문제점을 해결하고자, 본 논문에서는 Cu 표면에 Passivation layer를 형성 및 제거하는 개념으로 공정시 연마제를 사용하지 않으며, 낮은 압력조건에서 공정을 수행하기 위해, 전해질의 농도 변화에 따른 Liner sweep voltammetry 법을 사용하여 전압활성화에 의한 전기화학적 반응이 Cu전극에 어떤 영향을 미치는지 연구하였으며, 표면 조성을 알아보기 위하여 Energy Dispersive Spectroscopy (EDS) 분석을 하였고, Cu disk의 결정성과 배향성 관찰을 위해 X-Ray diffraction (XRD)로 금속 표면을 비교하여 실험 결과로 얻어진 데이터를 통하여 ECMP 공정에 적합한 전해액 선정과 농도를 선택하였다.

• Fibers and Polymers
• /
• 제2권1호
• /
• pp.135-139
• /
• 2001

Poly(hydroxamic acid) resin beads were prepared and complexed with various metal ions. We used IR spectroscopy to investigate the structure of metal complex. It proved that the products formed by introduction of metal ions gave stable and colored complex. It was found that the resin bead as synthesized would be a good column packing material for continuous extraction. Energy dispersive spectroscopy was use to study the distribution of metal ions in the resin matrix. It could be tentatively concluded that adsorption and diffusion of metal ions in the chelating resins mainly depended on the loading of the resin matrix which indicated interacting sites with metal ions.

• 한국기계가공학회지
• /
• 제6권3호
• /
• pp.16-23
• /
• 2007

An experimental investigation with diode laser system was carried out to study the effect of surface heat treatment on the die materials(SM45C, SKD11, SK3). The surface heat treatment characteristics of the laser beam are evaluated using hardness tests, optical microscopy, X-ray diffraction and energy dispersive X-ray spectroscopy(EDS). Results indicated that the beam size, focal length, feed rates are changed surface hardened characteristics. SM45C is higher hardness than other materials and composed to martensite grain at hardened zone, whereas other materials(SKD11, SK3)are low hardness than expected and composed to austenite and allayed martensite at hardened zone. The intensive X-ray diffraction patterns of (110)-(200)-(211) is detected hardened surface and the hardened surface distributed plenty of carbon density than metal zone.

• 공업화학
• /
• 제32권5호
• /
• pp.497-503
• /
• 2021

본 연구에서는 악취가스 및 휘발성 유기 화합물을 산화 제거하기 위한 백금/티타니아를 허니컴 및 메탈폼 담체에 코팅하는 방법을 확인하였다. 다양한 방법 중 파우더 코팅과 나노 코팅에 대한 비교를 수행하였다. SEM/EDX (Scanning Electron Microscopy/Energy Dispersive X-ray spectroscopy) 분석은 허니컴 및 메탈폼의 표면 상태 및 노출된 백금 성분비를 조사하는데 사용되었다. 또한, 촉매 코팅 방법에 따른 톨루엔, 트리메틸아민, 아이소프로필 알코올의 제거 성능을 비교하였다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.41-50
• /
• 2016

OBJECTIVES : In this study, microstructural components of crumb rubber modified asphalt (CRMA) binder were investigated using environmental scanning electron microscope (ESEM). To clearly understand the elemental composition of the CRMA binder, energy dispersive X-ray spectroscopy (EDX) was employed on the ESEM samples. METHODS : CRMA binders were produced using open blade mixers at $177^{\circ}C$ for 30 min. The binders were artificially aged through a series of accelerated aging processes. Sample preparation was done by making a mold shape on the glass slide. Thereafter, the morphology of the CRMA binder was observed using the ESEM coupled with the EDX. RESULTS : The images captured from the ESEM indicate that the unaged CRMA binder appears to have a single-phase continuous nonuniform structure after the addition of crumb rubber particles, whereas the artificially aged CRMA binder was observed to have two different phases. ESEM coupled with EDX shows detailed internal structure of the modified binders compared to other technologies (i.e., optical microscopy, atomic force microscopy, and conventional scanning electron microscope). CONCLUSIONS : The captured images resemble the internal structures such as the viscous properties of the unaged CRMA binder and the interaction between the rubber particles and the base binder at aged condition. ESEM is a powerful instrument and with the introduction of EDX, it provided more details of the network microstructure of the asphalt binder. ESEM coupled with EDX is recommended for use in future investigation of microstructure of asphalt binders.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권3호
• /
• pp.103-110
• /
• 2014

Purpose: The current gold standard for clinical jawbone formation involves autogenous bone as a graft material. In addition, demineralized dentin can be an effective graft material. Although demineralized dentin readily induces heterotopic bone formation, conventional decalcification takes three to five days, so, immediate bone grafting after extraction is impossible. This study evaluated the effect of vacuum ultrasonic power on the demineralization and processing of autogenous tooth material and documented the clinical results of rapidly processed autogenous demineralized dentin (ADD) in an alveolar defects patient. Methods: The method involves the demineralization of extracted teeth with detached soft tissues and pulp in 0.6 N HCl for 90 minutes using a heat controlled vacuum-ultrasonic accelerator. The characteristics of processed teeth were evaluated by scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Bone grafting using ADD was performed for narrow ridges augmentation in the mandibular area. Results: The new processing method was completed within two hours regardless of form (powder or block). EDS and SEM uniformly demineralized autotooth biomaterial. After six months, bone remodeling was observed in augmented sites and histological examination showed that ADD particles were well united with new bone. No unusual complications were encountered. Conclusion: This study demonstrates the possibility of preparing autogenous tooth graft materials within two hours, allowing immediate one-day grafting after extraction.

• 한국식품과학회지
• /
• 제48권5호
• /
• pp.418-423
• /
• 2016

근적외선분광분석기와 에너지 분산형 X선 형광분석기를 이용한 분석방법을 개발하여 각각 97.5, 98.0%의 높은 정확도의 판별식을 확립하였고, 시중 유통 시료를 분석하여 검증한 결과 각각 96.3, 95.0%의 판별 정확도를 확인하였다. 이상의 연구 결과를 통하여 근적외선분광분석기와 에너지 분산형 X선 형광분석기를 이용하여 청국장 원산지 판별이 가능함을 확인하였고 이는 유기성분 함량에 따른 근적외선 흡광도와 무기성분 함량에 따른 X선 형광에너지 강도가 국내산과 수입산 간에 차이가 있기 때문으로 사료된다.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.98-102
• /
• 2010

목련잎 추출액을 이용하여 Au core-Ag shell 합금 나노입자를 합성하였다. 환원제인 식물잎 추출액을 먼저 $HAuCl_4$ 용액과 반응시키고 다음에 $AgNO_3$ 용액과 반응시켜 금 seed와 은 shell을 형성시켰다. 반응시간에 따른 UV-visible spectroscopy의 변화를 모니터링하여 합금 나노입자의 형성을 관찰하였다. 합성된 합금 나노입자를 transmission electron microscopy(TEM), energy dispersive X-ray spectroscopy(EDS), X-ray photoelectron spectroscopy(XPS) 등으로 특성화 하였다. TEM image로부터 관찰된 합금 나노입자는 삼각형, 오각형, 육각형 등의 평판과 구 구조의 혼합물이었다. EDS와 XPS 분석으로부터 결정된 금/은 합금 나노입자의 원자 은 함량은 각각 34와 65 wt%로 Au core-Ag shell 나노구조가 형성되었음을 알 수 있었다. 이러한 core-shell 형태의 나노구조는 표면 강화 라만 분광 및 생물분자의 고감도 검출 등에 잠재적인 응용이 기대된다.