• Nuclear Engineering and Technology
• /
• 제29권2호
• /
• pp.175-180
• /
• 1997

It has been known that eater-side corrosion of fuel rods in nuclear reactor is accompanied with the metallic loss of wall thickness and hydrogen pickup in the fuel dadding tube. The fuel dad corrosion is one of the major factors to be controlled to maintain the fuel integrity during reactor operation. An oxide later thickness measuring device equipped with ECT probe system was developed by KAERI, and whose performance test was carried out in NDT(Non-destructive Test) hot-cell or PIE(Post Irradiation Examination) Facility. At first, the calibration/performance test was executed for the unirradiated standard specimen rod fabricated with several kinds of plastic thin films whose thickness ore predetermined, and the result of which showed a good precision within 10% of discrepancy. And then, hot test us peformed for the irradiated fuel rod selectively extracted from J44 fuel assembly discharged from Kori Unit-2. The data obtained with this device were compared with the metallographic result obtained from destructive examination in PIEF hot-cell on the same fuel rod to verify the validity of the measurement data.

• 전기학회논문지
• /
• 제62권10호
• /
• pp.1436-1443
• /
• 2013

A variety of studies on imitating the skeletal structure and the gait of legged animals have been done in order to develop walking robots which have an ability to adapt to atypical environments. In this paper, we analyzed the gait of a Bearded dragon lizard using the motion capture system, proposed a calibration scheme of the motion data and generated the trotting gait of a lizard based on the calibrated data. Also, we constructed the dynamic model based on the biometric data of a Bearded dragon lizard and applied the trotting gait of the lizard to the dynamic model. We verified the validity of the gait with the commercial dynamic simulation software.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.206.2-206.2
• /
• 2011

Domestic hydroelectric power plants has been manufactured as the design condition by the demand. Hydraulic turbine power plants operating at appointed load shall be operate stable in terms of pressure, discharge, rotational speed and torque. A performance guarantees for hydro turbines shall be contain, as a minimum, guarantees covering power, discharge and specific hydraulic energy, efficiency, maximum momentary overspeed and maximum momentary pressure and maximum steady-state runaway speed, as well as guarantees related to cavitation. But, present in Korea, the absence of testing laboratories and technical criteria for the performance test of small hydropower degrades the efficiency of the domestic hydropower machines, and makes it difficult to objectively evaluate the performance of hydro turbine. Therefore We planned making a basis of performance test of small hydropower turbine by using our flowmeter calibration system the largest one in Korea. We planned the maximum measurable power of hydro turbine will be 200 kW in our system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.834-836
• /
• 2005

This paper describes algorithms for enhancing the reliability of measurements to verify the performance of energy efficiency programs with an simple method. Fundamentally, measurements contain erroneous data because of the various causes. and so proper procedures or schemes are prepared before the performance is evaluated. In this paper, we propose an approach for detecting and correcting an adulterate data, such as missing and bad data. Erroneous data are detected or corrected by pre-described measuring conditions, ensemble average, and standard deviation of measurements at measuring time. The proposed algorithms are tested by field test measurements. From case studies we drew the promising results.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.163-169
• /
• 2018

The present article discusses about the measurement techniques of acoustic impedance that becomes one of the important acoustic characteristics of various boundaries found inside of propulsion systems. Acoustic characteristics including acoustic impedance and reflection coefficient can be often assessed and estimated by use of the two-microphone method. Theoretical expressions of acoustic impedance and reflection coefficient measured in an impedance tube are presented for both cases with mean flow and without flow, and the practical application of the method through calibration is also provided. The acoustic impedance and the reflection coefficient are related with axial locations of microphones, thermodynamic characteristics of gas inside, and the transfer function between the pressure wave measurements at multiple locations.

• 센서학회지
• /
• 제23권1호
• /
• pp.29-34
• /
• 2014

A dosimeter using tissue-equivalent scintillator by photon-counting method was developed and evaluated in its performance. The dosimeter is portable and can be operated by low power from lap-top computer. A data-acquisition software of the dosimeter system was developed by Labwindows/CVI based on Windows. The energy to channel ratio for energy calibration was 0.839 keV/ch. obtained from pulse height spectrum of $^{137}Cs$ and $^{60}Co$ gamma-ray. Using the dosimeter system, the absorbed dose of environmental radiation in Gyungju was 0.18 ${\mu}Sv/h$.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.110-114
• /
• 2009

The model to calculate the solar radiation at the surface was developed and the annual global solar radiation calculated by the model was compared with the KMA(Korea Meteorological Administration) surface measured data The difference between calculated and measured values was distinguished clearly because of the calibration problem of the pyranometer, but the global distribution of solar radiation calculated by the model was very similar to NREL(National Renewable Energy Laboratory) result of USA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1748-1749
• /
• 2007

활선차량의 붐 끝단에 탑재되어 있는 로봇의 기준좌표계는 활선차량의 접근 위치와 붐의 확장 길이 및 각도에 따라 달라지므로 작업대상물과 로봇 사이의 상대 위치를 찾아내어 설정된 작업 경로를 보정하여야만 한다. 본 논문에서는 작업대상물인 애자 영상으로부터 카메라를 보정하는 기법을 제시하여 활선작업 차량의 붐 끝단에 장착된 로봇의 위치 및 자세를 측정할 수 있도록 하였다. 이를 위하여 핀홀 카메라 모델을 적용하였으며 원기둥 형태의 애자 영상으로부터 카메라 내부 파라미터 및 외부 파라미터를 추출하였다. 제시된 기법은 시뮬레이션을 통하여 효용성을 입증하였다.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.299-303
• /
• 2016

Prompt gamma activation analysis using a thermal neutron-guided beam at Japan Atomic Energy Agency JRR-3M was applied for the precise determination of Si in silicon nitride ceramic reference materials [Japan Ceramic Reference Material (JCRM) R 003]. In this study, the standard addition method coupled with internal standard was used for the nondestructive determination of Si in the sample. Cadmium was used as internal standard to obtain the linear calibration curves and to compensate for the neutron beam variability. The analytical result of determining Si in JCRM R 003 silicon nitride fine powder ceramic reference materials using prompt gamma activation analysis was in good agreement with that obtained by classical gravimetric analysis. The relative expanded measurement uncertainty (k = 2) associated with the determined value was 2.4%.

• 센서학회지
• /
• 제7권3호
• /
• pp.179-187
• /
• 1998

플라즈마의 이온온도를 측정하기 위하여 전하교환체로 탄소박막을 이용한 $90^{\circ}$ 원통형 중성입자 에너지 분석기를 설계 제작하였다. Duoplasmatron을 이용하여 에너지 $0.5{\sim}3.0\;keV$ 수소이온에 대해 장치의 에너지 교정 및 에너지 분해능을 조사하였다. 에너지에 따른 정전편향판 전압과의 관계는 $E_{o}(keV)$=3.83V(kV) 였다. 에너지 분해능은 입사입자의 에너지가 3.0 keV 인 경우 약 2 %였으며, 에너지가 0.5 keV 일 때는 약 9 % 로 수소이온의 에너지가 증가함에 따라 향상되었다. 또한 전하교환체로 두께 $0.5{\sim}2.0{\mu}g/cm^{2}$ 사이의 탄소박막을 사용하여 입사 중성입자의 에너지와 탄소박막의 두께에 따른 에너지 교정, 에너지 손실 및 전하교환된 입자의 에너지 분해능을 측정하였다. 중성수소입자의 에너지($E_{o}$)는 탄소박막의 두께(${\mu}g/cm^{2}$)와 정전편향판 전압(kV)의 함수로 $E_{o}(keV)=(0.53d+4.4){\cdot}V(kV)$ 였다. 중성입자의 손실 에너지는 $0.5{\sim}3.0\;keV$ 사이의 입사입자 에너지와 $0.5{\sim}2.0{\mu}g/cm^{2}$ 사이의 탄소박막 두께에 따라 $0.23{\sim}0.89\;keV $ 였다. 손실에너지는 중성수소입자의 에너지와 탄소박막 두께의 함수로 ${\Delta}E=(0.12d+0.27){\cdot}{E_{o}}^{1/2}(keV)$ 였다. 전하가 교환된 입자의 에너지 분해능은 실험의 범위에서 $7{\sim}35\;%$였으며, 입사 중성입자의 에너지가 높을수록, 탄소박막의 두께가 얇을수록 향상되었다.