• 한국광물학회지
• /
• 제12권1호
• /
• pp.23-31
• /
• 1999

The dehydroxylation of kaolinite was investigated in detail by means of energy-filtering transmission electron microscope with both orientations parallel and perpendicular to c. The dehydroxylation could be characterized by the broad background including (0.211) band (20~24$^{\circ}$ 2$\theta$) on X-ray diffraction and by the three halo rings (d-spacing : 3.28~4.40$\AA$ (near (02,11) band), 2.41~245$\AA$ (near (20,13) band), 1.16~1.23$\AA$ (near (0.8,44) band)), and (02,11) and (20,13) spots on electron diffraction. These indicate existence of a short-range order along the a and b axes. Interplanar spacing of (001) is reduced to about 6.86$\AA$ and the sharp additional intensity maximum of about 14.2$\AA$ reveals that metakaolinite has a modulated structure along c axis. It is proposed that the modulated structure is attributed to the domains consisting of more than two-layers due to the changes of positions of the vacant octahedral sites in successive layers.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.304-313
• /
• 2013

Wireless Sensor Networks, especially supporting for surveillance service, are one of the core properties of network-centric warfare(NCW) that is a key factor of victory in future battlefields. Such a tactical surveillance sensor network must be designed not just for energy efficiency but for real-time requirements of emergency data transmission towards a control center. This paper proposes efficient clustering-based methods for supporting mobile sinks so that the network lifetime can be extended while emergency data can be served as well. We analyze the performance of the proposed scheme and compare it with other existing schemes through simulation via Qualnet 5.0.

• 소음진동
• /
• 제6권5호
• /
• pp.575-585
• /
• 1996

In order to build a quiet and comfortable ship, the noise levels on board ship must be predicted at early design stage. Statistical Energy Analysis (SEA) developed by R. H. Lyon has been well known to be the most useful frame work to study the energy flow of noise and vibration in structure. This paper applied this theory to predict the transmission loss of structure-borne noise of model structure and has developed computer program. Components constructions model structure have been all considered as SEA elements. And we also estimated the SEA parameters from the model structure. Using SEA and a new conception of STL, we found the transimission character of structure-borne noise theoretically by the idealized ship model, and then compared the results with three cases.

• 한국해양환경ㆍ에너지학회지
• /
• 제3권2호
• /
• pp.41-48
• /
• 2000

부유식방파제의 소파성능 개선을 위한 실험적인 연구를 수행하였다. 투과계수는 부유식방파제의 홀수에 큰 영향을 받으며 계류체인의 무게에는 큰 영향을 받지 않는다. 두 개의 방파제를 배열을 하면 방파효율을 높일 수 있으며, 앞 뒤 부유체의 흘수를 적절히 선택을 하면 넓은 주파수대에 걸쳐 안정된 방파 성능을 가질 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.636-639
• /
• 2001

InGaN/GaN multiple quantum wells (MQWs) grown with various growth interruptions between the InGaN well and GaN barrier by metal-organic chemical vapor deposition were investigated using photoluminescence, high-resolution transmission electron microscopy, and energy filtered transmission electron microscopy (EFTEM). The luminescence intensity of the MQWs with growth interruptions is abruptly reduced compared to that of the MQW without growth interruption. Also, as the interruption time increases the peak emission shows a continuous blue shift. Evidence of indium clustering is directly observed both by using an indium ratio map of the MQWs and from indium composition measurements along an InGaN well using EFTEM. The higher intensity and lower energy emission of light from the MQW grown without interruption showing indium clustering is believed to be caused by the recombination of excitons localized in indium clustering regions and the increased indium composition in these recombination centers.

• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.48-52
• /
• 1992

Indium tin oxide (ITO) layers are of considerable interest on account of the combination of properties they provide high electrical conductivity, high infrared reflection with high solar energy transmission, high transmission in the visible range. We are concerned about the variation of the spectral transmittances and sheet resistances as the thickness of SiO2-ZrO2 barrier layer and ITO layers and heat treating conditions are changed. Transmittances and reflectivities were studied by measuring UV-VIS-NIR-, FT-IR spectroscopy. ITO films are crack free, homogeneous and of polycrystalline cubic structure. The microstructure of good ITO films shows a narrow grain size distribution and mean value of 100 nm. The selectivity of absorbing properties is improved by increasing the thickness of ITO films. The increase of sheet resistance of ITO films are due to the increase in the reaction between films and glass substrate.

• 한국전기전자재료학회논문지
• /
• 제30권10호
• /
• pp.672-676
• /
• 2017

Electrical energy is playing an increasingly vital role as the primary energy source in everyday life. With the increase in electric power consumption, power facilities are under an increasing stress and must operate at a high capacity. Consequently, the demand for electric power cables in power transmission and distribution lines is rapidly increasing. Underground distribution lines have been steadily replacing the aboveground lines owing to the increase in electric power demand and the need to increase the supply voltage. In addition to line damage, worker safety is of primary concern in this type of underground infrastructure. In this study, to improve the safety of workers dealing with underground transmission lines, we analyzed the electromagnetic field generated around the distribution line and determined the basic criteria for developing a device that can detect a live underground line.

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.254-260
• /
• 2017

Data packets from sensor nodes scattered over measuring fields are generally forwarding to the sink node, which may be connected to the wired networks, in a wireless sensor network. So many data packets are gathered near the sink node, resulting in significant data packet collisions and severe transmission latency. In an event detection application such as object tracking and military, bursty data is generated when an event occurs. So many data packet should be transmitted in a limited time to the sink node. In this paper, we present a delay efficient and bursty traffic friendly MAC protocol called DEBF-MAC protocol for wireless sensor networks. The DEBF-MAC uses a slot-reserved mechanism and sleep period control method to send multiple data packets efficiently in an operational cycle time. Our simulation results show that DEBF-MAC outperforms DW-MAC and SR-MAC in terms of energy consumption and transmission delay.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.33-33
• /
• 2000

In this paper a new distributive control system for BA(Building Automation ) lighting control used on general microprocessors is presented. For optimal lighting control and saving energy, The system have to control the group and pattern lighting control as well as individual light control at one time. Tn this paper, This functions are accomplished with low-cost and simple microprocessor. A plurality of modulated light control terminals are connected to the central control unit through a pair of power line. This power line provide both power and signal to the each terminal and the data is transmitted through cyclic time division multiplex transmission. With this structure a low-cost distributive control system for lighting applications has been achieved, allowing energy and maintenance saving and reliability increase of the light control system.

• Nuclear Engineering and Technology
• /
• 제33권2호
• /
• pp.201-208
• /
• 2001

The high power RF transmission line components are required for transmitting MW level RF power continuously in RF heating and current drive system which heat the plasma and produce plasma current in fusion reactor The liquid stub and phase shifter is proposed as the superior to the conventional stub and phase shifter. Experimental results show that they are reliable and easy to operate compared to the conventional stub and phase shifter. There is no distortion of reflected power during the raising of the liquid level. RF breakdown voltage is over 40kV. Temperature increment of the liquid is expected not to be severe. These results verify that the liquid stub and phase shifter can be used reliably in the high power continuous RF facilities.