• Rapid Communication in Photoscience
• /
• v.2 no.2
• /
• pp.64-66
• /
• 2013

Photoreduction of $CO_2$ into hydrocarbon fuels on the surface of photocatalyst is one of the breakthroughs in the field of photocatalysis. At present various approaches have been investigated with the aim of increasing the $CO_2$ conversion efficiency. The reactor for photoconversion of $CO_2$ plays a vital role in experimental setup. In this work an attempt was made to testify a newly designed the photoreactor for conversion of $CO_2$ into useful products. The photoreactor was specifically designed for simple operation bearing features of temperature and pressure control. The reactor has been tested successively with the standard titania, Degussa P25 yielding methane with moderate production rate of 30.8 $ppm{\cdot}g^{-1}{\cdot}h^{-1}$ under UV lamp with 365 nm wavelength. The methane yield obtained is comparable to the values reported in literature. Thus we anticipate that this experimental setup equipped with newly designed photoreactor can yield competitive amounts of fuels from $CO_2$ photoredcution via 365 nm UV light illumination on various photocatalysts.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 1999.11a
• /
• pp.5-24
• /
• 1999

There are severl types of Eco-village developed in abvanced countries including urban, suburban and rural style. For the establishment of Eco-village in Korea, it was focussed to introduce the rural style which has been developed inyersively in European countries such as Denmark, England and Germany. As a key cencept for Eco-villge it was explained briefly and discussed on the renewable energy(wind power park, bio-mass and solar energy collector and heating system), eco-architure, methane gas device, living machine (wastewater treatment facility) and organic farming. It was also discussed how important the basic standard and guidelines for organic agriculture to run essential for the system. For this reason major principles of international applicable standard(draft) for organically grown foods by FAO/WHO Codex alimentarius was shortly desidered. as one of very suitable type for Environmental Agriculture Districts Program which Korean govenment is going to establish in the near future. In conculusion it was also suggested that positive participation of organic famers, enthusiastic eneagement of inhabitans and support strategy of govemment /NGO groups might play very important role for successful managment of Eco-village ecologically sustainable after establishment.

• Korean Journal of Organic Agriculture
• /
• v.9 no.2
• /
• pp.39-54
• /
• 2001

For the development of Eco-village in Korean rural area, it was focussed to introduce the rural style which has been developed intensively in European countries such as Denmark, England and Germany. As the main concept for Eco-village it was explained briefly in the paper on the renewable energy(wind power park, bio-mass and solar energy collector and heating system), eco-architecture, methane gas device, living machine(wastewater treatment facility) and organic farming. It was also discussed how important the basic standard and guidelines for organic agriculture to run Eco-village environmentally soundly as a whole system and why it is so much essential for the system. For this reason major principles of international applicable standard for organically grown foods by FAO/WHO Codex alimentarius was also shortly described. In the paper the Eco-village concept was considered as a suitable model for Environmental Agriculture Districts Project which Korean government is going to establish at rural area in the near future. In conclusion it was suggested that the positive participation of organic farmers, enthusiastic engagement of inhabitants and support strategy of government/NGO groups might play very important role for successful management of Eco-village ecologically benign and economically sustainable after establishment.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.1
• /
• pp.7-14
• /
• 2013

This study has analysed the ultimate loads acting on a wind turbine which is operating in a high turbulent flow condition because the ultimate loads are critical factors on the safe design of wind turbine. Since wind flow on the most parts of Korean mountainous are strongly influenced by complex configurations of the topography, turbulence intensity on somewhere is so stronger than an international design standard. For this reason, the characteristics of turbulent wind data collected from actual sites were analyzed and used for the ultimate load evaluation of the wind turbine. With the 270 design load cases on the international standards, the differences of ultimate loads on the wind turbine operating in the standard or high turbulent wind condition are calculated and compared for the an enhanced knowledge of the safe design basis. As are result, it is revealed the specific ultimate loads are strongly affected by the high turbulent wind conditions, thus the characteristics of turbulent flow must be considered during the design of wind turbine.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.6
• /
• pp.24-32
• /
• 2008

This paper discussed the Feasibility study of wind power generation considering the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind speed, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was almost the same at wind power plants installed in southwestern coastal areas where wind speed was low as at those installed in mountain areas in Gangwondo where wind speed was high. This demonstrates that the shape parameter of wind distribution is low due to the characteristics of mountain areas, and the standard deviation of wind speed is large due to the effect of mountain winds, therefore, actual generation compared to southwestern coastal areas is almost similar in mountain areas even though wind speed is high.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.863-866
• /
• 2011

The electrode reaction of $Eu^{3+}$ in a LiCl-KCl eutectic melt has been re-examined using cyclic voltammetry (CV). In this work, for the first time, the kinetic details of a $Eu^{3+}/Eu^{2+}$ redox system have been completely elucidated, along with the thermodynamic property, through a curve fitting applied to experimental CV data, which were obtained in a wide scan rate range of 0.5 to 10 V/s. The simulated results showed an excellent fit to all experimental CV data simultaneously, even though the curve fittings were performed within a large dynamic range of initial transfer coefficient values, formal potentials, and standard rate constants. As a result, a proper formal potential, transfer coefficient, and standard rate constant for the $Eu^{3+}/Eu^{2+}$ redox system were successfully extracted using the CV curve fitting.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.265-267
• /
• 2018

This paper addresses the study of wired and wireless gateway with IoT Standard. The gateway that we develop through this study is designed to be utilized for collection energy information among various serveces. It is aimed at the role as an Advanced Metering Infrastructure which is a core infrastructure for Smargrid services. To this end, the gateway has a structure that can apply the IoT standard and the network technology used in the Smartgrid. These gateway can be applied with small and medium energy consumer that require energy information collection.

• Journal of the Korean Professional Engineers Association
• /
• v.44 no.6
• /
• pp.40-44
• /
• 2011

Nuclear energy in Korea began in 1958, when the Korea's atomic energy act was formulated and the relevant organizations were founded. Since then, notwithstanding the two catastrophe like TMI and Chernobyl accident, Korea made a wise decision to expand the peaceful uses of the nuclear energy as well as to localize the essential nuclear design technology of fuel and nuclear steam supply system. This decision resulted in the success of export of nuclear power plants as well as research reactor in 2010s. The Korea's nuclear policy, which well utilized 'international crisis in nuclear business' as 'opportunity of Korea to get. nuclear technology', is believed nice policy as a role model of nuclear new-comer countries. Based upon the success story of localization of nuclear technology, Korea had an eye for a niche market, which was a basis of development of SMART, Korea-made integral PWR. The operation of a SMART plant can sufficiently provide not only electricity but also fresh water for 100,000 residents. Last two years, Korea's nuclear industry team led by the Korea Atomic Energy Research Institute completed the standard design of SMART and applied to the Korea's regulatory body for standard design approval. Now the Korea's licensing authority is reviewing the design with the relevant documents, and the design team is doing its best to realize its hope to get the approval by the end of this year. From next year, the SMART business including construction and export will be explored by the KEPCO consortium.

• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.234-247
• /
• 1995

Trace elements in airborne particulates were analyzed by instrumental neutron activation analysis (INAA) under the optimum analytical condition. Neutron irradiation for sample was done at the irradiation hole(neutron flux 1$\times$10$^{13}$ n/$\textrm{cm}^2$.s) of TRIGA MARK-III research reactor in the Korea Atomic Energy Research Institute. For the verification of the analytical method, NIST SRM-1648 and NIES CRM No.8 ore chosen and analyzed. The accuracy and precision of the analysis of 40 and 24 trace elements in the samples were compared with the certified and reported values, respectively. The analytical method was found to be reliable enough when the analytical data of NIES sample were compared with those of different counties. In the analytical result of two or both of standard reference materials, relative standard deviation wes within the 15％ except a few elements and the relative error was within the 10％. We used this method to analyze 30 trace elements in airborne particulates collected with the high volume air sampler(PM-10) at too different locations and also confirmed the possibility to use this method as a routine monitoring tool to find out environmental pollution sources.

• Applied Microscopy
• /
• v.52
• /
• pp.14.1-14.10
• /
• 2022

An electron probe X-ray microanalyzer (EPMA) is an essential tool for studying chemical composition distribution in the microstructure. Quantifying chemical composition using standard specimens is commonly used to determine the composition of individual phases. However, the local difference in chemical composition in the standard specimens brings the deviation of the quantified composition from the actual one. This study introduces how to overcome the error of quantification in EPMA in the practical aspect. The obtained results are applied to evaluate the chemical com position of retained austenite in multi-phase steel. Film-type austenite shows higher carbon content than blocky-type one. The measured carbon contents of the retained austenite show good coherency with the calculated value from the X-ray diffraction.