• 해양환경안전학회지
• /
• 제24권7호
• /
• pp.930-938
• /
• 2018

잠수함에서 발생하는 수중방사소음은 적함의 소나에 의해 피탐될 확률과 직결되며, 잠수함 저소음화 방안은 생존성 향상을 위해 필수적이다. 최신 잠수함의 경우 기계류 소음저감 및 고속/대형화가 진행됨에 따라 선체 주위에 발생하는 유동소음에 대한 관심이 높아지고 있다. 본 연구에서는 자유수면의 효과를 고려하여 잠수함 형상 주위에 발생하는 유동소음 수준을 예측할 수 있는 소음해석기법을 개발하였다. 잠수함이 자유수면 근처 운항시에 잠수함 주위 유동장의 교란에 의해 발생하는 난류유동소음과 쇄파버블에 의한 소음이 발생한다. 먼저 잠수함 주위 유동장 해석을 위해, VOF법 기반의 비압축성 이상유동(two-phase flow)해석을 수행하여 잠수함 주위 자유수면 형상과 유동장 정보를 도출하였다. 이후 난류유동소음해석을 위해 음향상사기법인 Permeable FW-H를 적용하였고, 쇄파버블 소음해석을 위해 유동해석에서 도출된 난류운동에너지 분포결과를 기반으로 쇄파버블 소음모델을 적용하였다. 최종적으로 개발된 유동소음 해석기법은 선박해양플랜트연구소(KRISO)의 대형캐비테이션터널(LCT)에서 수행된 잠수함 모형 유동소음계측 실험결과와 비교를 통해 검증을 수행하였다.

• 한국연안방재학회지
• /
• 제5권4호
• /
• pp.173-182
• /
• 2018

As the research about increasing the efficiency of dredging soil transport, the technology, which reduce the friction between pipe wall and fluid in the pipe and disturbed generating pipe blockage, has been developed. So for the purpose of applying this technology to real construction site, main test has been tried at the real scale test in field. As a test result, this paper will show 30% flow efficiency increasing by permitted electro magnetic force to the pipe. And test result was evaluated as a ultra sonic velocity profiler. To propose the design technique and the execution manual of the high efficiency dredging material transport technic, this research have confirmed flow status changing depending on a soil material kind under electro-magnetic field and analyze the effect of electro-magnetic field which affects to each dredged soil material transportation. For achieving this research, EMF(Electro-Magnetic Field) generator is installed on the dredger(20,000HP) and through monitored flow status, dredging soil flow rate and sampled material specification is confirmed. Also dredger operating condition is measured and dredger power for soil transportation, hydraulic gradient and flow rate are compared, as transportation efficiency is calculated by this parameter, it is possible to check transportation efficiency improvement depending on each dredged soil material under electro-magnetic field. To verify the technique of dredged soil transfer using electromagnetic field, which is the core technique of the high efficiency dredged soil transfer, and the technique of expert system for pipeline transfer and the flow state. This could lead to a verification of transfer efficiency according to the characteristics of the dredged soil (sand, clay, silt) and the transfer distance (5km, 10km, 15km), which is planned to be used for a technology development of pump power reduction and long-distance transfer applying the high efficiency dredged soil transfer technology.

• 자원ㆍ환경경제연구
• /
• 제30권2호
• /
• pp.299-323
• /
• 2021

본 연구는 1990년부터 2016년까지 한국의 정보통신기술(ICT), 무역 개방성, 금융 발전, 경제성장이 CO₂ 배출량에 미치는 영향을 분석하였다. 변수의 공적분관계는 Autoregressive distributed lag (ARDL)공적분 검증을 통해 확인되었다. 장기적으로 경제성장과 CO₂ 배출 간에는 연관관계가 확인되었지만, ICT를 비롯한 다른 요인은 장기적으로 CO₂ 배출량과의 연관관계를 확인하지 못하였다. 한편, 단기적으로 경제성장, ICT는 CO₂ 배출량을 증가시켰으며, 금융발전은 CO₂ 배출량 감소를 가져왔다. 무역개방성은 장기와 마찬가지로 단기에도 CO₂ 배출량에 큰 영향을 미치지 못하였다. 특히 ICT는 장기뿐만 아니라 단기적으로도 CO₂ 배출량 감소에 기여하지 못하였다. ICT를 통한 CO₂ 감축을 유도하기 위해서는 ICT를 활용하여 효율적으로 에너지를 절약할 수 있는 기술의 개발과 보급이 더욱 촉진되어야 할 것이다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권3호
• /
• pp.84-91
• /
• 2022

본 연구에서는 반복하중을 받는 대각선 철근콘크리트 커플링 보의 강섬유 형상비와 혼입률에 따른 이력거동을 분석하기 위한 실험적 연구를 수행하였다. 강섬유의 형상비와 혼입률을 주요변수로 설정하였으며, 국내 건축구조기준에서 제시한 연결보의 횡방향 보강량이 약 53% 완화된 4개의 실험체를 제작하였다. 실험에서는 ACI 374.2R-13에 따른 변위제어법으로 반복하중 실험을 수행하였으며, 실험 결과 강섬유가 혼입된 모든 실험체가 현행 구조기준에서 제시하는 공칭전단강도를 상회함을 확인하였다. 강섬유의 형상비가 증가할수록 대각선 철근의 좌굴을 방지하고 강섬유의 브리징 효과로 콘크리트의 균열면 증가를 방지하였다. 강섬유가 혼입된 실험체의 전단강도, 강성감소 및 에너지 소산능력은 강섬유가 혼입되지 않은 Vf0 실험체보다 우수하였다. 따라서 강섬유 철근콘크리트가 횡철근의 디테일을 완화할 수 있다고 판단된다.

• 해양환경안전학회지
• /
• 제28권7호
• /
• pp.1201-1208
• /
• 2022

일반적으로 부유식 해상풍력발전 에너지의 수급성과 효율을 극대화하기 위해서는 하부구조물의 파랑 감쇠로 인한 운동을 저감시키는 것이 중요하다. 선행 연구들에 따르면 파도 중 하부구조물에 설치된 감쇠판에 의해서 발생한 와류점성으로 인해 운동 응답이 감소되는 것으로 나타났다. 본 연구에서는 5MW급 반잠수식 OC5 플랫폼과 감쇠판이 부착된 두가지 플랫폼을 설계하고, 와류점성으로 인한 운동저감효과를 확인하기 위해 자유감쇠실험과 수치계산을 수행하였다. 모형시험 결과로 낙하 높이를 30 mm, 40 mm, 50 mm에서의 상하 자유감쇠실험을 수행하였을 때 OC5 플랫폼 대비 두 가지의 형태의 감쇠판이 부착된 플랫폼이 상대적으로 운동감쇠성능이 향상되었다. 모형시험과 수치계산 결과에서 형상화한 감쇠판 모델(KSNU Plate 1, KSNU Plate 2)들이 각각 OC5 대비 상하운동 진폭이 1.1배, 1.3배 각각 감소했으며, KSNU Plate 2 플랫폼은 KSNU Plate 1 플랫폼보다 OC5 대비 약 2배 감쇠성능이 좋아진 것으로 나타났다. 본 연구에서는 감쇠판의 면적과 와류점성이 상하동요의 감쇠율과 밀접한 관련을 보여준다.

• Restorative Dentistry and Endodontics
• /
• 제48권1호
• /
• pp.3.1-3.14
• /
• 2023

Objectives: This study evaluated the effect of different nanoparticulated zinc oxide (nano-ZnO) and conventional-ZnO ratios on the physicochemical properties of calcium aluminate cement (CAC). Materials and Methods: The conventional-ZnO and nano-ZnO were added to the cement powder in the following proportions: G1 (20% conventional-ZnO), G2 (15% conventional-ZnO + 5% nano-ZnO), G3 (12% conventional-ZnO + 3% nano-ZnO) and G4 (10% conventional-ZnO + 5% nano-ZnO). The radiopacity (R_ad), setting time (S_et), dimensional change (D_c), solubility (S_ol), compressive strength (C_st), and pH were evaluated. The nano-ZnO and CAC containing conventional-ZnO were also assessed using scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. Radiopacity data were analyzed by the 1-way analysis of variance (ANOVA) and Bonferroni tests (p < 0.05). The data of the other properties were analyzed by the ANOVA, Tukey, and Fisher tests (p < 0.05). Results: The nano-ZnO and CAC containing conventional-ZnO powders presented particles with few impurities and nanometric and micrometric sizes, respectively. G1 had the highest Rad mean value (p < 0.05). When compared to G1, groups containing nano-ZnO had a significant reduction in the S_et (p < 0.05) and lower values of D_c at 24 hours (p < 0.05). The C_st was higher for G4, with a significant difference for the other groups (p < 0.05). The S_ol did not present significant differences among groups (p > 0.05). Conclusions: The addition of nano-ZnO to CAC improved its dimensional change, setting time, and compressive strength, which may be promising for the clinical performance of this cement.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4102-4110
• /
• 2022

Aiming at high-power and long-pulse operation up to 1000 s, some improvements have been made for both 2.45 GHz and 4.6 GHz lower hybrid (LH) systems during the recent 5 years. At first, the guard limiters of the LH antennas with graphite tiles were upgraded to tungsten, the most promising material for plasma facing components in nuclear fusion devices. These new guard limiters can operate at a peak power density of 12.9 MW/m². Strong hot spots were usually observed on the old graphite limiters when 4.6 GHz system operated with power >2.0 MW [B. N. Wan et al., Nucl. Fusion 57 (2017) 102019], leading to a reduction of the maximum power capability. With the new limiters, 4.6 GHz LH system, the main current drive (CD) and electron heating tool for EAST, can be operated with power >2.5 MW routinely. Long-pulse operation up to 100 s with 4.6 GHz LH power of 2.4 MW was achieved in 2021 and the maximal temperature on the guard limiters measured by an infrared (IR) camera was about 540 ℃, much below the permissible value of tungsten material (~1200 ℃). A discharge with a duration of 1056 s was achieved and the 4.6 GHz LH energy injected into the plasma was up to 1.05 GJ. Secondly, the fully-active-multijunction (FAM) launcher of 2.45 GHz system was upgraded to a passive-active-multijunction (PAM), for which the density of optimum coupling was relatively low (below the cut-off value). Good coupling with reflection coefficient ~3% has been achieved with plasma-antenna distance up to 11 cm for the new PAM. Finally, in order to eliminate the effect of ion cyclotron range of frequencies (ICRF) wave on 4.6 GHz LH wave coupling, the location of the ICRF launcher was changed to a port that is located 157.5° toroidally from the 4.6 GHz LH system and is not magnetically connected.

• Journal of Animal Science and Technology
• /
• 제65권3호
• /
• pp.535-549
• /
• 2023

This study was to investigate the effects of different phytogenic feed additives (PFA) dosage levels in growing- finishing pigs stressed by high stocking density. A total of 72 mix sexed 12 weeks growing pigs ([Landrace × Yorkshire] × Duroc) with initial body weight (BW) of 49.28 ± 4.58 kg were used for 8 weeks. There were 3 replicate pens in each treatment group, with 3 pigs per pen. The dietary treatment groups consisted of basal diets in animal welfare density (negative control [NC]), basal diet in high stocking density (positive control [PC]), PC + 0.04% essential oil (ES1), PC + 0.08% essential oil (ES2), PC + 0.10% bitter citrus extract & essential oil (CES1), PC + 0.20% bitter citrus extract & essential oil (CES2), PC + 0.05% grape pomace extract (GP1), PC + 0.10% grape pomace extract (GP2). The reduction of space allowance decreased (p < 0.05) average daily gain, feed efficiency, and digestibility of dry matter, crude protein, and gross energy. Also, the fecal score of PC groups increased (p < 0.05) compared with other groups. Basic behaviors (feed intake, standing, lying) were inactive (p < 0.05) and singularity behavior (biting) was increased (p < 0.10) under high stocking density. There was no difference in blood profile. However, the supplementation of PFA alleviated the negative effects such as reduced growth performance, nutrient digestibility, and some increasing stress indicators in th blood (cortisol) and animal behavior (biting). In conclusion, the negative effect of high stocking density was most effectively mitigated by the normal dosage of the mixture of bitter citrus extract and essential oil additive (CES1).

• Animal Bioscience
• /
• 제37권7호
• /
• pp.1303-1315
• /
• 2024

Objective: This study aimed to determine the effects of increasing energy and protein levels in diets by including protected fat (PF), glycerol (GL), and soybean meal (SBM) on growth performance, physiological parameters, carcass characteristics, and behavioral measurements of late-fattening Hanwoo steers under heat stress conditions. Methods: Thirty-six steers (initial body weight, 724.9±58.3 kg; age, 25.5±0.4 month) were assigned into control (total digestible nutrient [TDN] 76%, crude protein [CP] 15%), PF (TDN 83.6%, CP 15%), PF+GL (TDN 83.6%, CP 15%) and PF+GL+SBM (TDN 83.6%, CP 16.5%) by randomized complete block design for a total of 16 weeks with division of 4-week periods. The average temperature-humidity index was 87.0 (1st period; severe), 82.8 (2nd; moderate), 71.4 (3rd; comfort), and 68.1 (4th; comfort). Results: The dry matter intake (DMI) showed no treatments differences during the whole experiment. However, DMI in 1st and 2nd period decreased by approximately 30% and 10% compared to 4th period, respectively. Higher average daily gain and feed conversion ratio were noted for treatments compared to control at both 1st and 2nd period (p<0.05). There were no treatment effects on rectal temperature (RT), cortisol, and behaviors during the entire experiment. However, both RT and cortisol in 0, 1st and 2nd period were higher than those of 3rd and 4th period (p<0.05). Carcass yield and grade remained unaffected by increasing TDN and CP levels. Behavioral changes in the hot season (1st period) included reduced lying (43%), increased standing (48%), decreased walking (62%), and decreased eating (38%) (p<0.05), with an increase in drinking by 54%. Rumination during standing was 53% higher, while rumination during lying was about 33% lower compared to the post-hot season (3rd period) (p<0.05). Conclusion: Dietary supplementation of protected fat in late-fattening Hanwoo steers under heat stress had a positive effect on preventing a reduction in performance.

• 한국작물학회지
• /
• 제69권2호
• /
• pp.88-96
• /
• 2024

영농형 태양광 하부에서 재식밀도를 달리하여 벼를 재배하고 생육 및 수량 변화를 분석한 결과는 다음과 같다. 1. 영농형 태양광 하부 벼 재배 시 차광에 의해 포기당 이삭수가 감소하였으며 재식밀도가 감소하면서 감소폭은 낮아지는 경향이었다. 2. 현미완전립 분석결과 일반재배에서는 재식밀도에 따른 큰 차이는 없었으나 영농형 태양광 하부에서 재식밀도가 낮아짐에 따라 현미완전립 비율이 증가하는 경향이었다. 3. 일반 노지에서 벼 80주 이앙에 비해 영농형 태양광 하부에서 60주 및 80주로 이앙 시 완전미수량성은 차이가 없었으며 100주 이앙시 추적형에서 크게 감소하였다. 4. 영농형 태양광 하부에서 60주로 벼 이앙 시 줄기단위 길이별 무게가 80주 및 100주 이앙에 비해 크게 증가하는 경향이었다.