• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.483-491
• /
• 2017

The interdigitated germanium (Ge) meta-lsemiconductor-metal (MSM) photodetectors (PDs) with and without an $SiO_2$ anti-reflection (AR) layer was fabricated, and the effect of $SiO_2$ AR layer on their optoelectronic response properties were investigated in detail. The lowest reflectance of 15.6% at the wavelength of 1550 nm was obtained with a $SiO_2$ AR layer with a thickness of 260 nm, which was in a good agreement with theoretically calculated film thickness for minimizing the reflection of Ge surface. The Ge MSM PD with 260 nm-thick $SiO_2$ AR layer exhibited enhanced device performance with the maximum values of responsivity of 0.65 A/W, the quantum efficiency of 52.2%, and the detectivity of $2.49{\times}10^9cm\;Hz^{0.5}W^{-1}$ under the light illumination with a wavelength of 1550 nm. Moreover, time-dependent switching analysis of Ge MSM PD with 260 nm- thick $SiO_2$ AR layer showed highest on/off ratio with excellent stability and reproducibility. All this investigation implies that 260 nm-thick $SiO_2$ AR layer, which is effective in the reduction in the reflection of Ge surface, has a great potential for Ge based optoelectronic devices.

• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.89-94
• /
• 2004

This Study is results of experimental works to investigate the characteristics of vibro-compaction of crushed stones having coarse grain sizes. For testing material, crushed stone, sieved within very narrow ranges of grain size distribution, was used. Cyclic loading apparatus was used to apply cyclic loading to the specimen prepared in the mold. Tests were performed by changing the ratio of the maximum to the minimum stress, frequency and the magnitude of the maximum and the minimum stresses. Settlement of specimen due to cyclic loading was measured to analyze the compaction efficiency and sieve analysis test after cyclic loading test was also carried out to find the crushing rate of the specimen. As results of cyclic loading test, normalized settlement in terms of specimen height tends to be converged around loading cycle number of 1500. The magnitude of normalized settlement is in the range of 3.11 ~ 8.57%. The crushing rate is in the range of 4.46 ~ 8.78%. Normalize settlement and the crushing rate tend to increase with decreasing the ratio of the maximum to the minimum stresses and they tend to increase with increasing the frequency and the magnitude of the maximum and the minimum stresses for the given ratio. In conclusions, compaction rate of crushed stone is controlled by the dynamic stress (difference between the maximum and the minimum stresses) and the crushing rate is dominated by applied energy to the specimen.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.168-180
• /
• 2018

Due to the spread of mobile devices and the introduction of high-quality services, mobile traffic is expected to increase sharply and overload of cellular networks is expected. D2D communication is a way to reduce the load and evolve to 5th generation. Since D2D communication directly communicates between the terminals, it can reduce the overload of the cellular network and improve energy efficiency, data rate and network performance. This paper proposes a D2D handover scheme for D2D communication in cellular networks. The cellular network is a 3GPP EPS, and the proposed D2D handover method improves the existing EPS handover process considering compatibility between existing EPS and D2D communication. We also demonstrate the superiority of the proposed handover scheme using the network simulator ns-3. Simulation results show that the proposed handover scheme is superior to existing handover methods in terms of CUE variation, packet transmission delay time, and throughput.

• Management & Information Systems Review
• /
• v.29 no.2
• /
• pp.53-73
• /
• 2010

SCEM is the concept of reducing environmental effect on the outside of purchasing and manufacturing process, delivery, and distribution process. An ultimate aim of SCEM are obtaining environmental stability and energy/materials operational efficiency. Although the importance of greening supply chain was highlighted, former researches were often based on case studies of specific industry and didn't provide clear definition of environmental supply chain management which includes fundamental notions for business practitioners. This study focuses on findings how the SCEM system practically run and what the characteristics of SCEM is in Korean firms through case studies. It is suggested that SCEM is more effective for environmental management rather than by making limited eco-innovation. Korean firms have considered that an international environmental regulation is more important than customers' needs for environmental goods for implementing SCEM.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1277-1281
• /
• 2020

A novel ceramic Gas Electron Multiplier (GEM) has been developed to meet the demand of high counting rate for the neutron detection which is an alternative to ³He-based detector at China Spallation Neutron Source (CSNS). An experiment was performed to measure the neutron transmittance of ceramic-GEM and FR4-GEM at the small angle neutron scattering (SANS) instrument. The result showed the ceramic-GEM has higher transmittance and less self-scattering especially for cold neutrons. One single ceramic GEM could give a gain of 10²-10⁴ in the mixture gas of Ar and CO₂ (90%:10%) and its energy resolution was about 27.7% by using ⁵⁵Fe X ray of 5.9 keV. A prototype has been developed in order to investigate the performances of the ceramic GEM-based neutron detector. Several neutron beam tests, including detection efficiency, spatial resolution, two-dimensional imaging, and wavelength spectrum, were carried out at CSNS and China Mianyang Research Reactor (CMRR). The results show that the ceramic GEM-based neutron detector is a good candidate to measure the high intensity neutrons.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2185-2189
• /
• 2010

Closely arranged CdSe and Zn doped CdSe vertical nanorod bundles were grown directly on FTO coated glass by using electrodeposition method. Structural analysis by XRD showed the hexagonal phase without any precipitates related to Zn. FE-SEM image showed end capped vertically aligned nanorods arranged closely. From the UV-vis transmittance spectra, band gap energy was found to vary between 1.94 and 1.98 eV due to the incorporation of Zn. Solar cell parameters were obtained by assembling photoelectrochemical cells using CdSe and CdSe:Zn photoanodes, Pt cathode and polysulfide (1M $Na_2S$ + 1M S + 1M NaOH) electrolyte. The efficiency was found to increase from 0.16 to 0.22 upon Zn doping. Electrochemical impedance spectra (EIS) indicate that the charge-transfer resistance on the FTO/CdSe/polysulfide interface was greater than on FTO/CdSe:Zn/polysulfide. Cyclic voltammetry results also indicate that the FTO/CdSe:Zn/polysulfide showed higher activity towards polysulfide redox reaction than that of FTO/CdSe/polysulfide.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1510-1532
• /
• 2017

In smart grid, privacy implications to individuals and their families are an important issue because of the fine-grained usage data collection. Wireless communications are utilized by many utility companies to obtain information. Network coding is exploited in smart grids, to enhance network performance in terms of throughput, delay, robustness, and energy consumption. However, random linear network coding introduces a new challenge for privacy preserving due to the encoding of data and updating of coefficients in forwarder nodes. We propose a distributed privacy preserving scheme for random linear network coding in smart grid that considers the converged flows character of the smart grid and exploits a homomorphic encryption function to decrease the complexities in the forwarder node. It offers a data confidentiality privacy preserving feature, which can efficiently thwart traffic analysis. The data of the packet is encrypted and the tag of the packet is encrypted by a homomorphic encryption function. The forwarder node random linearly codes the encrypted data and directly processes the cryptotext tags based on the homomorphism feature. Extensive security analysis and performance evaluations demonstrate the validity and efficiency of the proposed scheme.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.2
• /
• pp.285-290
• /
• 2013

The slotless linear synchronous motor(LSM) has the advantages that the structure of the mover is simple and it can control the trust force ripple by make the magnetic energy in a gap uniform by removing a slot of the primary iron core. Also, the application of the transportation system is becoming expansion because it high efficiency drive is possible and compares with the other LSM as control is more excellent. However, the application of the living field was unsatisfactory. Therefore, in this study, we examined the drive characteristics by the position feedback control for the living field application of the slotless LSM and we prove useful of the controller through load loading and the acceleration changing to get minimization of the speed vibration and stable answer characteristics.

• Journal of Environmental Science International
• /
• v.27 no.9
• /
• pp.743-751
• /
• 2018

The objective of this study was to investigate the adsorption potential of chicken feathers for the removal of OrangeII (AO7) from aqueous solutions. Batch experiments were performed as a function of different experimental parameters such as initial pH, reaction time, feather dose, initial OrangeII concentration and temperature. The highest OrangeII uptake was observed at pH 1.0. Most of the OrangeII was adsorbed at 2 h and an adsorption equilibrium was reached at 6 h. As the amount of chicken feather was increased, the removal efficiency of OrangeII increased up to 99%, but its uptake decreased. By increasing the initial concentration and temperature, OrangeII uptake was increased. The experimental adsorption isotherm exhibited a better fit with the Langmuir isotherm than with the Freundlich isotherm, and maximum adsorption capacity from the Langmuir constant was determined to be 0.179244 mmol/g at $30^{\circ}C$. The adsorption energy obtained from the Dubinin-Radushkevich model was 7.9 kJ/mol at $20^{\circ}C$ and $30^{\circ}C$ which indicates the predominance of physical adsorption. Thermodynamic parameters such as ${\Delta}G^0$, ${\Delta}H^0$, and ${\Delta}S^0$ were -12.28 kJ/mol, 20.64 kJ/mol and 112.32 J/mol K at $30^{\circ}C$, respectively. This indicates that the process of OrangeII adsorption by chicken feathers was spontaneous and endothermic. Our results suggest that as a low-cost biomaterials, chicken feather is an attractive candidate for OrangeII removal from aqueous solutions.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.74.1-74.1
• /
• 2014

We study a wraping instability of a geometrically thin, non-self-gravitating disk surrounding binary supermassive black holes on a circular orbit. Such a circumbinay disk is subject to not only tidal torques due Line 8 to the binary gravitational potential but also radiative rorques due to radiation emitted from each accretion disk. We find tat a circumbinary disk initially aligned with the binary orbital plane is unstable to radiation-driven warping beyond the marginally stable warping radius, which is sensitive to both the ratio of vertical to horizontal shear viscosities and the mass-to-energy conversion efficiency. As expected, the tidal torques give no contribution to the growth of warping modes but tend to align the circumbinary disk with the orbital plane. Since the tidal torques can suppress the warping modes in the inner part of circumbinary disk, the circumbinaary disk starts to be warped at the radii larger than the marginally stable warping radius. If the warping radius is of the order of 0.1 pc, a resultant semi-major axis is estimated to be of the order of 10-2 pc to 10-4 pc for 107 Msun black hole. We also discuss the posibility that the central objects of observed warped maser disks in active galactic nuclei are binary supermassive black holes with a triple disk: two accretion disks around the individual black holes and one circumbinary disk surrounding them.