• 한국컴퓨터정보학회논문지
• /
• 제15권6호
• /
• pp.65-72
• /
• 2010

에드 혹 네트워크의 각 무선 단말기는 배터리 기반의 제한된 에너지로 동작하기 때문에 효율적인 에너지 사용에 관한 문제는 아주 중요하다. 시스템 수명을 연장하기 위해서는 단말 노드의 에너지 소비를 균형있게 유도하여 어느 특정 단말기의 에너지가 먼저 고갈되어 통신 단절을 초래하는 상황을 지연시켜야 한다. 또한 단말기 노드의 빈번한 이동 등으로 인해 신뢰성이 낮은 링크는 경로 설정시 고려해야 할 요소이다. 본 논문에서 제안하는 CMLR 방법은 잔여 에너지와 링크 에러율, 전송 소비 에너지를 고려한 새로운 비용 관계식을 이용하여 에너지 사용의 효율성을 증가시킨다. 이 방법은 전송 에너지 소모의 최소화와 노드 수명의 최대화 사이의 값을 절충하여 에너지 효율성을 높이고 균형있는 에너지 소비를 유도하여 네트워크 수명을 연장시키도록 하는 방법이다. 또한, 본 논문에서는 시뮬레이션을 통해 제안하는 CMLR의 성능을 검증하였으며, 네트워크 수명과 경로의 효율성 측면에서 볼 때 기존의 알고리즘보다 우수한 결과를 보여주었다.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.8-13
• /
• 2020

In this paper, the electric vehicle (EV) and internal combustion engine vehicle (ICEV) are compared for different driving cases. The EV exhibits a lower powertrain efficiency when driven on the aggressive driving cycle than when driven on the moderate cycle. In particular, EV powertrain efficiency is low when the battery state of charge (SOC) is low, but ICEV efficiency increases when the driving cycle changes from the moderate cycle to the aggressive cycle. Based on these results, attempts can be made to increase EV powertrain efficiency. EV charging before the battery power drops to a low charging state can reduce energy consumption by 2.7% for an urban area. Furthermore, ECO driving has a more significant effect on EVs than on ICEVs.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.134-139
• /
• 2006

A energy efficiency of quadruped walking robot has been studied mathematical modeling, dynamic analysis or simulation by consumption energy per period. In this paper, We used the quadruped walking robot Titan-VIII in order to carry out this experiment. The total moving length is about 2[m] , the stride length is 0.1, 0.2. 0.3, and walking period is changed by 1.0, 1.5, 2.0, 2.5 3.0[sec] Per each stride length. So consumption energy of 15 cases are measured. As a result of this experiment we obtained the best energy efficiency when stride length was 0.3[m], and Period was 1.5[sec].

• Journal of Communications and Networks
• /
• 제18권4호
• /
• pp.649-657
• /
• 2016

In this paper, we investigate energy efficiency (EE) of the traditional co-located and the distributed massive multiple-input multiple-output (MIMO) systems. First, we derive an approximate EE expression for both the idealistic and the realistic power consumption models. Then an optimal energy-efficient remote access unit (RAU) selection algorithm based on the distance between the mobile stations (MSs) and the RAUs are developed to maximize the EE for the downlink distributed massive MIMO systems under the realistic power consumption model. Numerical results show that the EE of the distributed massive MIMO systems is larger than the co-located massive MIMO systems under both the idealistic and realistic power consumption models, and the optimal EE can be obtained by the developed energy-efficient RAU selection algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권7호
• /
• pp.2302-2324
• /
• 2014

Cluster-based wireless sensor network (WSN) can significantly reduce the energy consumption by data aggregation and has been widely used in WSN applications. However, due to the intrinsic many-to-one traffic pattern in WSN, the network lifetime is generally deteriorated by the unbalanced energy consumption in a cluster-based WSN. Therefore, energy efficiency and network lifetime improvement are two crucial and challenging issues in cluster-based WSNs. In this paper, we propose a Non-Uniform Node Distribution (NUND) scheme to improve the energy efficiency and network lifetime in cluster-based WSNs. Specifically, we first propose an analytic model to analyze the energy consumption and the network lifetime of the cluster-based WSNs. Based on the analysis results, we propose a node distribution algorithm to maximize the network lifetime with a fixed number of sensor nodes in cluster-based WSNs. Extensive simulations demonstrate that the theoretical analysis results determined by the proposed analytic model are consistent with the simulation results, and the NUND can significantly improve the energy efficiency and network lifetime.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.862-865
• /
• 2018

The proposed scheme minimizes the Idle time under the residual energy of the sensor node to adjust the Sleep-Wakeup period and minimize unnecessary energy consumption. It is The proposed scheme minimizes the Idle time under the residual energy of the sensor node to adjust the Sleep-Wakeup period and minimize unnecessary energy consumption. It is an important process to control the Application Packet Framework including the PHY and the MAC layer at each node's Idle time with the Idle time mechanism state before the proposed function is executed. The Current Control Level of the Report Attribute is fixed at one sending / receiving node where power consumption can occur, by changing Sleep-Wakeup time, the low power consumption efficiency was improved while satisfying the transmission requirement of the given delay time constraint.

• 융복합기술연구소 논문집
• /
• 제3권2호
• /
• pp.57-60
• /
• 2013

The purpose of this study is to analysis of how to calculate fuel efficiency in major development countries (U.S. and Europe) and energy consumption formular derivation of domestic CNG fuel and prove by vehicle test. The formula of fuel consumption is different in mpg(mile per gallon), l/100km, and km/l each countries. CNG fuel has a significant impact on fuel density, composition, and Hydro-Carbon ratio. So, this study how to measurement and calculation procedures of CNG gaseous fueled vehicle energy consumption rate.

• 한국IT서비스학회지
• /
• 제18권1호
• /
• pp.79-90
• /
• 2019

Maximizing energy efficiency minimizes the energy consumption of computation, storage and communications required for IT services, resulting in economic and environmental benefits. Recent advancement of flash and next generation non-volatile memory technology and price decrease of those memories have led to the rise of so-called AFA (All-Flash Array) storage devices made of flash or next generation non-volatile memory. Currently, the AFA devices are rapidly replacing traditional storages in the high-performance servers due to their fast input/output characteristics. However, it is not well known how effective the energy efficiency of the AFA devices in the real world. This paper shows input/output performance and power consumption of the AFA devices measured on the Linux XFS file system via experiments and discusses energy efficiency of the AFA devices in the real world.

• 한국CDE학회논문집
• /
• 제15권4호
• /
• pp.289-296
• /
• 2010

Energy consumption by buildings accounts for a large part of the world‘s energy consumption. Methods to analyze building energy consumption before construction have been studied for decades. With BIM (Building Information Modeling) technology, architects can easily export building information to data models in order to analyze the design‘s effect on building energy efficiency. Although several BIM-based energy simulation applications are currently available, utilizing these applications for energy efficiency simulation is difficult. In this paper, by comparing existing BIM-based energy applications, the authors test the building energy efficiencies estimated by some BIM models, offer ideas and solutions to problems that appeared during the test process and propose new methods for BIM-based energy evaluation based on quantitative factors.

• 한국해양공학회지
• /
• 제37권5호
• /
• pp.181-189
• /
• 2023

The fuel consumption of marine diesel engines holds paramount importance in contemporary maritime transportation and shapes energy efficiency strategies of ocean-going vessels. Nonetheless, a noticeable gap in knowledge prevails concerning the influence of ship hull conditions and propeller roughness on fuel consumption. This study bridges this gap by utilizing artificial intelligence techniques in Matlab, particularly convolutional neural networks (CNNs) to comprehensively investigate these factors. We propose a time-series prediction model that was built on numerical simulations and aimed at forecasting ship hull and propeller conditions. The model's accuracy was validated through a meticulous comparison of predictions with actual ship-hull and propeller conditions. Furthermore, we executed a comparative analysis juxtaposing predictive outcomes with navigational environmental factors encompassing wind speed, wave height, and ship loading conditions by the fuzzy clustering method. This research's significance lies in its pivotal role as a foundation for fostering a more intricate understanding of energy consumption within the realm of maritime transport.