• 융합정보논문지
• /
• 제11권6호
• /
• pp.40-48
• /
• 2021

이 논문은 그린 딜로 인한 전기 에너지 수요가 급증을 될 수 있기 때문에 이를 제시하고자 한다. 그러나 미래의 전기자동차와 많은 전기 에너지의 조달은 여전히 화석 연료에 의존한다. 이에 IT 산업의 중요성이 부각되고 수소-전기차의 수요와 연관 산업으로 그 수요가 증가하게 된다. 본 연구의 방법은 IT 산업의 전기 에너지 수요보다 미래 차세대 동력으로 전기차의 충전과 연관성을 조사하였다. 이는 실증적 회귀 분석을 통해 경제 성장에 따른 산업용 전기와 가정용 에너지를 성장에 따른 PPP의 상관관계를 도출하였다. 그 결과 전기차와 차세대 전기차를 포함한 변화량은 GDP 대비 구매력 변화 국가의 1/3에서 유의미한 것으로 나타났다. 이는 전기차의 수요가 있는 32개국 중 12개 국가(이탈리아, 캐나다, 스위스, 폴란드, 슬로베니아, 독일, 슬로바키아, 핀란드, 스웨덴, 체코, 에스토니아, 덴마크)가 더 많은 전기 에너지에 더 민감하기에 전체 구매력에 영향을 미치게 된다. IT-전기 에너지원의 미사용 전력 낭비를 방지하고, 수소전기 충전-보존함으로써, 향후 성장을 위한 수급에 국가의 IT 산업 보존 완충 시설대비가 필수불가결하다.

• 에너지공학
• /
• 제18권4호
• /
• pp.230-238
• /
• 2009

우리나라는 에너지 절약 및 온실가스 배출저감 기술 중 하나로써 소형 열병합 발전과 소형 연료전지 열병합 발전을 연구해 왔으며 정책적으로 이를 보급하려고 한다. 기존의 석탄화력발전설비, 복합화력발전설비, 석유 화력발전설비를 열병합 발전설비로 대체하는 시나리오를 작성하여 에너지소비량과 온실가스 배출량의 변화추이를 에너지 경제 모델인 LEAP (Long-range Energy Alternative Planning system)을 이용하여 정량적으로 분석하였다. 2019년을 기준으로 열병합 발전설비를 석탄화력발전설비와 교체하였을 경우, 온실가스 배출량이 약 6.34%가 감소하였고 복합화력발전설비와 교체하였을 경우, 온실가스 배출량이 약 0.8%가 증가하였으나 열병합발전설비의 열생산량을 고려해주면 배출량이 감소하는 경향을 보일 것으로 사료된다. 석유화력발전설비를 열병합발전설비로 대체할 경우, 온실가스 배출량이 약 0.8% 감소할 것으로 예상된다.

• 한국실내디자인학회논문집
• /
• 제21권2호
• /
• pp.3-13
• /
• 2012

With the emergence of the smart era, interest in future society and new dwelling spaces is growing. This research analyzes the planning items applied to future house pavilions in Korea to examine which functions will be more emphasized and considered importantly in the dwelling spaces. This research paper aims to identify those dwelling functions that will occupy greater importance from the users' point of view. As for the research methodology, it comprised a literature review and an analysis of case studies. The results of this research were as follows; 1) It was arranged that the dwelling functions were safety, amenity, convenience, independence, economics, society, relaxation, aesthetic appearance. 2) For future dwelling environments, environment-friendly technology for conservation of energy was important in addition to intellectual cutting edge technologies, 3) Safety was most basic among all dwelling functions, 4) Planning items related to amenity and economics were found to be most common, indicating that they were important functions in future dwelling environments, 5) With regard to convenience, planning items related to increasing efficiency of household chores through the application of ubiquitous technology were found to be most common, 6) There was no indication of planning items related to independence and society, 7) Cutting edge technology and emotional technology appear to be integrated in planning items related to relaxation and aesthetic appearance, and 8) Each future dwelling pavilion suggested that over 80% of the planning items were related to amenity, convenience, and economics. We expect that the results from our research will be useful in creating a life-centered design of future dwelling spaces that account for dwelling functions.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권3호
• /
• pp.117-128
• /
• 2002

This paper describes the smoke filling process of a fire field model based on a self-deve-loped SMEP (Smoke Movement Estimating Program) code to the simulation of fire induced flows in the two types of atrium space containing a ceiling heat flux. The SMEP using PISO algorithm solves conservation equations for mass, momentum, energy and species, together with those for the modified k-$\varepsilon$ turbulence model with buoyancy production term. Also it solves the radiation equation using the discrete ordinates method. Compressibility is assumed and the perfect gas law is used. Comparison of the calculated upper-layer average tempera-ture and smoke layer clear height with the zone models has shown reasonable agreement. The zone models used are the CFAST and the NBTC one-room. For atrium fires with ceiling glass the ceiling heat flux by solar heat causes a high smoke temperature near the ceiling. However, it has no effect on the smoke movement such as the smoke layer clear heights that are important in fire safety. In conclusion, the smoke layer clear heights that are important in evacuation activity except the early of a fire were not as sensitive as the smoke layer tem-perature to the nature of ceiling heat flux condition. Thus, a fire sensor in atrium with ceiling glass has to consider these phenomena.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.1-6
• /
• 2011

Vibration-based Structural Health Monitoring (SHM) systems use field measurements of operational signals, which are distorted by noise from many sources. Reducing this noise allows a more accurate assessment of the original "clean" signal and improves analysis results. The implementation of a noise reduction methodology for the Modal Distribution Method (MDM) is reported here. The spectral subtraction method is a popular broadband noise reduction technique used in speech signal processing. Its basic principle is to subtract the magnitude of the noise from the total noisy signal in the frequency domain. The underlying assumption of the method is that noise is additive and uncorrelated with the signal. In speech signal processing, noise can be measured when there is no signal. In the MDM, however, the magnitude of the noise profile can be estimated only from the magnitude of the Power Spectral Density (PSD) at higher frequencies than the frequency range of the true signal associated with structural vibrations under the additional assumption of white noise. The implementation of the spectral subtraction method to MDM may decrease the energy of the individual mode. In this work, a modification of the spectral subtraction method is introduced that enables the conservation of the energies of individual modes. The main difference is that any (negative) bars with a height below zero after subtraction are set to the absolute value of their height. Both noise reduction methods are implemented in the MDM, and an application example is presented that demonstrates its effectiveness when used with a signal corrupted by noise.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1358-1370
• /
• 2003

The effects of anode, cathode, and cooling channels for a Proton Exchange Membrane Fuel Cell (PEMFC) on flow fields have been investigated numerically. Continuous open-faced fluid flow channels formed in the surface of the bipolar plates traverse the central area of the plate surface in a plurality of passes such as a serpentine manner. The pressure distributions and velocity profiles of the hydrogen, air and water channels on bipolar plates of the PEMFC are analyzed using a two-dimensional simulation. The conservation equations of mass, momentum, and energy in the three-dimensional flow solver are modified to include electro-chemical characteristics of the fuel cell. In our three-dimensional numerical simulations, the operation of electro-chemical in Membrane Electrolyte Assembly (MEA) is assumed to be steady-state, involving multi-species. Supplied gases are consumed by chemical reaction. The distributions of oxygen and hydrogen concentration with constant humidity are calculated. The concentration of hydrogen is the highest at the center region of the active area, while the concentration of oxygen is the highest at the inlet region. The flow and thermal profiles are evaluated to determine the flow patterns of gas supplied and cooling plates for an optimal fuel cell stack design.

• 한국주조공학회지
• /
• 제18권3호
• /
• pp.240-245
• /
• 1998

In the view point of the environmental conservation and the energy reduction, the recycling of metal scrap is coming as one of the global subjects in the world. In this study, the movement of intermetallics with electromagnetic force in a melt of a scrap of Al-Si-Cu alloy (JIS ADC12), which was widely used in diecasting process, was investigated in order to eliminate the Fe element, which was usually accumulated in a scrap. In this study, we applied electromagnetic method to eliminate Fe element in ADC12 aluminum alloy scrap which contains 1.64wt.% Fe and the effects of electromagnetic force on the particle movement was visualized and confirmed by water modeling and experiment. As a result, the Fe intermetallic compounds are moved to the direction opposite to that of the electromagnetic force as the force applies, thus eliminated from the bulk metal. Therefore, the content of Fe in matrix decreased from 1.64wt.% to 0.45wt.%.

• Journal of Mechanical Science and Technology
• /
• 제14권2호
• /
• pp.236-250
• /
• 2000

Compression ignition direct injection diesel engines employed a high pressure injection system have been developed as a measure to improve a fuel efficiency and reduce harmful emissions. In order to understand the effects of the pressure variation, many experimental works have been done, however there are many difficulties to get data in engine condition. This work gives numerical results for the high pressure effects on spray characteristics in wide or limited space with near walls. The gas phase is modelled by Eulerian continuum conservation equations of mass, momentum, energy and fuel vapour fraction. The liquid phase is modelled using the discrete droplet model approach in Lagrangian form and the drop behavior on a wall is calculated with a new droplet-wall interaction model based on the experiments observing individual drops. The droplet distributions, vapour fractions and gas flows are shown in various injection pressure cases. In free spray case which the injection spray has no wall impaction, the spray dispersion and vapour fraction increase and drop sizes decrease with increasing injection pressure. The same phenomena appears more clearly in wall impaction cases.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.430-436
• /
• 1997

Time-dependent Flow characteristics of a two-dimensional lid-driven square cavity flow of six high Reynolds numbers, $10^4 2{\times}lO^4., 3{\times}l0^4, 5{\times}lO^4, 7.5{\times}lO^4$ and $10^5$ were investigated. A convection conservative difference scheme based upon SOLA to maintain the nearly 2nd-order spatial accuracy was adopted on irregular grid formation. Irregular grid number is $80{\times}80$ and its minimum size is about 1/400 of the cavity height(H) and its maximum is about 1/53 H. The result shows that at Re= $10^4$, periodic migration of small eddies appearing in corner separation region and its temporal sinusoidal fluctuation are represented. And another critical Reynolds number which shows the commencement of flow randomness emerging from the periodic fluctuation is assumed to be around Re= $1.5{\times}10$. At five higher Reynolds numbers ($2{\times}lO^4., 3{\times}l0^4, 5{\times}lO^4, 7.5{\times}lO^4$ and $10^5$), an organizing structure of four consecutive vortices similar to a Moffat vortex at two lower corners is revealed from time-mean flow patterns.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.189-205
• /
• 1996

The twin-roll type strip continuous casting process(or direct rolling process) of steel materials is characterized by two rotating water cooled rolls receiving a steady supply of molten metal which solidifies onto the rolls. A solidification analysis of molten metal considering phase transformation and thermofluid is performed using finite diffefence method with curvilinear coordinate to reduce computing time and molten region analysis with arbitrary shape. An enthalpy-specific heat method is used to determine the temperatures inthe roll and the steel. The temperature distribution of cooling roll is calculated using two dimensional finite element method, because of complex roll shape due to cooling hole in rolls and improvemnt accuracy of calculation result. The energy equaiton of cooling roll is solved simultanuously with the conservation equaiton of molten metal in order to consider heat transfer through the cooling roll. The calculated roll temperature is compared to experimental results and the heat transfer coefficient between cooling roll surface and rolling material(steel) is also determined from comparison of measured roll temperature and calculated temperature.