References
- Guerrassi, N. and Dupraz, P., 1998, 'A Common Rail Injection System for High Speed direct Injection Diesel Engines,' SAE paper 980803
- Nishizawa, K., et al, 1987, 'A New Concept of Diesel Fuel Injection Timing and Injection Rate Control System,' SAE paper 870434
- Miyaki, M., et al, 1991, 'Development of New Electronically Controlled Fuel Injection System ECD-U2 for Diesel Engines,' SAE paper 910252
- Nishida, M., et al , 1992, 'Observation of High Pressure Fuel Spray with Laser Light Sheet Method,' SAE paper 920459
- Bower, G. R. and Foster, D. E., 1989, 'Investigation of the Characteristics of a High Pressure Injector,' SAE 89210l
- Ficarella, A., Laforgia, D., Starace, G. and Damiani, V., 1997, 'Experimental Investigation of the Sprays of an Axi-Symmetric Nozzle of a Common-Rail High Pressure Electro-Injector,' SAE 970054
- Chang, C. T. and Farrell, P. V., 1997, 'A Study on the Effects of Fuel Viscosity and Nozzle Geometry on High Injection Pressure Diesel Spray Characteristics,' SAE 970352
- Hosoya, H. and Obokata, T., 1992, 'Flow Characteristics of High-Speed Spray and Entrainment Air,' JSAE Vol. 58, No. 548, pp. 270-276
- Sasaki, S., Akagawa, H. and Tsujimura, K., 1998, 'A Study on Surrounding Air Flow Induced by Diesel Sprays,' SAE paper 980805
- Minami, T., Yamaguchi, I., Shintani, M., Tsujimura, K. and Suzuki, T., 1990 ' Analysis of Fuel Spray Characteristics and Comustion Phenomena Under High Pressure Fuel Injection,' SAE 900438
- Kamimoto, T., Yokota, H. and Kobayashi, H., 1987, 'Effect of High Pressure Injection on Soot Formation Processess in a Rapid Compression Machine to Simulate Diesel Flames,' Transaction of the SAE, Vol. 96, Sect. 4, pp. 783-791
- Verhoeven, D., Vanhemelryck, J-L. and Baritaud, T., 1998, 'Macroscopic and Ignition Characteristics of High-Pressure Sprays of Single-Component Fuels,' SAE 981069
- Gyakushi, N. and Takamoto, Y., 1989, 'Controlling Factors of Comustion in a D. I. Diesel Engines (ignition delay),' JSAE, Vol. 55, No. 519, pp. 3601-3605
- Kakegawa, T., Suzuki, T., Tsujimura, K. and Shimoda, M., 1988, 'A Study on Combustion of High Pressure Fuel Injection for Direct Injection Diesel Engine,' SAE 880422
- Shundoh, S., Kakegawa, T., Tsujimura, K. and Kobayashi, S., 1991, 'The Effect of Injection Parameters and Swirl on Diesel Combustion Eith Figh Pressure Fuel Injection,' SAE 910489
- Kato, T., Tujimura, K., Shintani, M., Minami, T. and Yamaguchi, I., 1989, 'Spray Characteristics and Combustion Improvement of D. I. Diesel Engine with High Pressure Fuel Injection,' SAE 890265
- Kato, T., Koyama, T., Sasaki, K., Koji Mori and Kazutoshi Mori, 1998, 'Common Rail Fuel Injection System for Improvement of Engine Performance on Heavy Duty Diesel Engine,' SAE 980806
- Watkins, A. P., 1989, 'Three-Dimensional Modelling of Gas Flow and Sprays in Diesel Engines,' In Markatos, N. C,, editor, Computer Simulation of Fluid Flow, Heat and Mass Transfer and Combustion in Reciprocating Engines, pp. 193-237
- Spalding, D. B., 1980, 'A General Computer Program for Fluid-Flow, Heat Transfer and Chemical Reaction Processes,' Int. FEM-Congress
- Araki, K. and Moriyama, A., 1982, 'Deformation Behaviour of a Liquid Droplet Impinging on a Hot Metal Surface,' In Int. Cont. on Liquid Atomization and Spraying Systems ICLASS-82
- Jayaratne, O. W. and Mason, B. T., 1964, 'The Coalescence and Bouncing of Water Drop at Air/Water Interface,' Proc. R. Soc. Lond-A 280, p. 545
- Wachters, L. H. J. and Westerling, N. A. J., 1966, 'The Heat Transfer from a Hot Wall to Impinging Water Drops in the Spheroidal State,' Chemical Engineering Science, 21, p. 1047 https://doi.org/10.1016/0009-2509(66)85100-X
- Arcoumanis, C. and Chang, J. C., 1994, 'Flow and Heat Transfer Characteristics of Impinging Transient Diesel Sprays,' SAE 940678
- Naber, J. D. and Farrell, P., 1993, 'Hydrodynamics of Droplet Impingement on a Heated Surface,' SAE 930919
- Park, K. and Watkins,A. P., 1996, 'Assessement and Application of A New Spray wall Impaction Model,' Computers in Reciprocating Engines and Gas Turbines, IMechE, pp. 1-10
- Suzuki, M., Nishida, K. and Hiroyasu, H., 1993, 'Simultaneous Concentration Measurement of Vapour and Liquid in An Evaporating Diesel Spray,' SAE 930863
- Reitz, R. D. and Diwakar, R., 1986, 'Effect of Drop Breakup on Fuel Sprays,' SAE 860469