• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권4호
• /
• pp.300-304
• /
• 2015

A low bit rate speech coder based on the non-uniform sampling technique is proposed. The non-uniform sampling technique is based on the detection of inflection points (IP). A speech block is processed by the IP detector, and the detected IP pattern is compared with entries of the IP database. The address of the closest member of the database is transmitted with the energy of the speech block. In the receiver, the decoder reconstructs the speech block using the received address and the energy information of the block. As results, the coder shows fixed data rate contrary to the existing speech coders based on the non-uniform sampling. Through computer simulation, the usefulness of the proposed technique is shown. The SNR performance of the proposed method is approximately 5.27 dB with the data rate of 1.5 kbps.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.677-680
• /
• 1998

In this paper, we proposed a lwo bit rate subband coding with adaptive vector quantization using the correlation between motion vector and block energy in subband. In this method, the difference between the input signal and the motion compensated interframe prediction signal is decomposed into several narrow bands using quadrature mirror filter (QMF) structure. The subband signals are then quantized by adaptive vector quantizers. In the codebook generating process, each classified region closer to the block value in the same region after the classification of region by the magnitude of motion vector and the variance values of subband block. Because codebook is genrated considering energy distribution of each region classified by motion vector and variance of subband block, this technique gives a very good visual quality at low bit rate coding.

• 한국환경과학회지
• /
• 제22권6호
• /
• pp.687-694
• /
• 2013

To investigate organoclay, high styrene resin masterbatch (HSR), high impact polystyrene (HIPS), and polystyrene (PS) as reinforcing materials for the improvement of the abrasion resistance of poly(styrene-block-butadiene-block-styrene) (SBS), SBS/organoclay nanocomposites, SBS/HSR, SBS/HIPS, and SBS/PS blends were prepared. The effect of organoclay and blends on the abrasion resistance and mechanical properties of SBS was investigated. Even though intercalations of organoclay are observed for SBS/Cloisite 20A nanocomposites and not for SBS/Cloisite 30B composites, the abrasion resistance of SBS/Cloisite 20A nanocomposites is worse than that of SBS/Cloisite 30B composites. When SBS was blended with HSR, HIPS and PS, the abrasion resistance of the blends increases with increasing of HSR, HIPS and PS content from 0 to 20 wt%.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.741-751
• /
• 1996

The coupled conduction and convection heat transfer from the protruding heat source in a vertical channel is numerically investigated. Conjugate solution of the two-dimensional energy equation is obtained for the incompressible air flow over the rectangular block with local heat source. It was found that several recirculation zones and separation bubble near the block were related to Re and Gr. And the results show that fractions of the heat transfer through each of the block face, maximum temperature of the block and the relative effect of each parameter on the maximum temperature and heat transfer.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.329-330
• /
• 2006

This paper presents a recovery technique for images with block-based corruption by transmission losses. Conventional methods that do not consider edge directions can cause blocked blurring artifacts. In this paper, we present a block recovery scheme using Haar wavelet features. The adaptive selection of neighboring blocks is performed based on the energy ratio f wavelet subbands. The lost blocks are recovered by linear interpolation in the spatial domain using selected block pairs. The proposed directional recovery method is effective for the strong edge because it exploits the varying neighboring blocks adaptively according to the edges and the directional information in the image. The proposed method outperforms the previous methods that used only a predefined set of neighboring blocks.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.42-48
• /
• 2016

This study presents an experiment investigation on natural convection heat transfer of air-cooling Proton exchange membrane fuel cells (PEMFCs) in a enclosure system for unmanned aerial vehicles (UAVs). Considered are replacing fuel cell stack with Aluminum block for heat generating inside a enclosure chamber. The volume ratio of fuel cell stack and chamber for simulation to the actual size of aerial vehicle is 1 to 15. The parameters considered for experimental study are the environmental temperature range from $25^{\circ}C$ to $-60^{\circ}C$ and the block heat input of 10 W, 20 W and 30 W. Effect of the thermal conductivity of the block and power level on heat transfer in the chamber are investigated. Experimental results illustrate the temperature rise at various locations inside the chamber as dependent upon heat input of fuel cell stack and environmental temperature. From the results, dimensionless correlation in natural convection was proposed with Nusselt number and Rayleigh number for designing air-cooling PEMFC powered high altitude long endurance (HALE) UAV.

• Membrane and Water Treatment
• /
• 제9권2호
• /
• pp.105-113
• /
• 2018

Maillard reaction products like melanoidins present in industrial fermentation wastewaters are complex compounds with various functional properties. In this work, novel ultrafiltration (UF) mixed matrix membrane (MMM) composed of polysulfone (PSF) and nanocomposites was prepared through a phase inversion process for the recovery of melanoidins. Nanocomposites were prepared with acid functionalized multiwalled carbon nanotubes (MWCNTs) as the reinforcing filler for chitosan-thermoplastic starch blend. Higher nanocomposites content in the PSF matrix reduced the membrane permeability and melanoidins retention indicating tighter membrane with surface defects. The membrane surface defects could be sealed with dilute polyvinyl alcohol (PVA) solution. The best performing membrane (1% nanocomposites in 18% PSF membrane sealed with 0.25% PVA coating) resulted in uniform melanoidins retention of 98% and permeability of 3.6 L/m2 h bar over a period of 8h. This demonstrates a low fouling PSF membrane for high melanoidins recovery.

• 전기화학회지
• /
• 제18권2호
• /
• pp.75-80
• /
• 2015

방향족 친핵성 치환반응을 이용하여 멀티블록형 sulfonated poly(arylene ether sulfone)(SPAES) 공중합체를 합성하였다. 서로 다른 말단(F- 또는 OH-말단)을 가지는 친수성 및 소수성 올리고머를 합성한 후 이를 이용하여 고분자 전해질 막을 합성하였다. 각기 다른 말단이 블록공중합체의 분자량에 미치는 영향을 분석하였고, 서로 다른 친수성구조가 블록고분자의 특성에 어떠한 영향을 미치는지 분석하였다. 합성된 멀티블록고분자는 70%이상의 습도에서 나피온 막과 비슷하거나 우수한 이온전도도를 나타내었고, 특히 SPAES 9의 경우 전습도 영역에서 SPAES 10보다 높은 이온전도도를 보였는데, 이는 친수성 블록내의 술폰산기의 부분 농도가 높아짐에 따라 친수성-소수성 간의 상분리가 발달되어 이온전도도가 향상된 것으로 보인다.

• Bulletin of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.795-799
• /
• 2007

The bulk properties of poly(γ-benzyl-L-glutamate)-poly(ethylene glycol), PBLG-PEO, diblock copolymer were investigated. The helical transition from 7/2 to 13/5 for pure PBLG was at 120 oC while those of GE-1 and GE-2, which contain flexible PEO block 40 wt% and 60 wt% respectively, were shown at 135℃ on DSC experiments. FT-IR and XRD experiments were shown that the diblock copolymers maintained their α-helical structure in the temperature range between 25℃ and 175℃. Increasing relative size of coil part resulted in the increase of intermolecular packing distances. Due to well-maintained helical structure, lyotropic LC phases were observed for the PBLG-PEO block copolymer by the polarized optical microscope (POM). Especially, GE-3 copolymer, which has 12.5 wt% PEO contents, showed the smectic C phase. The competition of favorable aggregation energy between rod-rod and coil-coil, and unfavorable aggregation energy of rod-coil give rise to change the supramolecular structure in mixed solvent.

• 한국태양에너지학회 논문집
• /
• 제35권3호
• /
• pp.81-91
• /
• 2015

LED has received intensive research attention due to its long life, high efficacy, fast response and wide colour availability, and has secured extensive application areas. However, LED chips within the modules convert only fraction of electric energy into light, and majority of supplied energy needs to be dissipated as heat, which challenges in the performance and life of the LED modules. IEC 62717 specifies the performance requirements for LED modules together with the test methods and conditions. The present study examined the influence of different design parameters on performance temperature through series of experiments and numerical simulations. The economic means to change the module performance temperature during the measurement of mandatory markings were suggested based on predicted cooling performances.