• 신재생에너지
• /
• 제18권4호
• /
• pp.1-11
• /
• 2022

Landfill gas (LFG) generation characteristics in a construction waste landfill zone (block E) and mixed landfill zone (block A) were analyzed. During the period from October 2018 to April 2022, a total of 936×10³ and 1,001×10³ tons of waste were disposed in block E and block A, respectively. Out of this, 27.1% and 55.6% were biodegradable waste in block E and block A, respectively. The landfill masses of the two blocks were converted to be comparable. Then, the biodegradable waste and organic carbon were estimated by element analysis, biodegradable carbon by biochemical methane potential experiment (DC), and sulfate ion by acid decomposition. Results showed that biodegradable waste, organic carbon, biodegradable carbon, and sulfate ions in block A were 2.1, 1.6, 5.2, and 0.4 times greater than those in block E, respectively. The amount of LFG generated by block A was 4.8 times greater than that by block E. The average concentrations of methane (CH₄) were 60.8% and 60.9% in block E and block A, respectively, which were unrelated to the nature of disposed waste. The average concentrations of hydrogen sulfide (H₂S) were significantly high in block E (4,489 ppm) and block A (8,478 ppm). As the DC/SO₄^2- of block E and block A were 0.35 and 4.56, respectively, increase in DC/SO₄^2- caused increase in not only the total amount but also the concentration of H₂S generated.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.71-72
• /
• 2006

We investigated a simultaneous living anionic polymerization process of isoprene (I) and 4styrene-d_8$ (S) in $benzene-d_6$ as a solvent with sec-buthyllithium as an initiator into polyisoprene(PI)-block-poly($styrene-d_8$)(PS) and the polymerization-induced molecular self-assembling process. This process was observed in-situ by time-resolved small-angle neutron scattering (SANS) experiment. The SANS profiles measured exhibited three time regions, where (i) the selective growth of PI chains occurs; (ii) the living chain ends switch from isoprenyllithium to styryllithium, and (iii) the SANS exhibited the polymerization induced disorder-to-order transition and order-to-order transition.

• 태양에너지
• /
• 제9권1호
• /
• pp.62-69
• /
• 1989

This analysis is to investigate the influence of inflow angle when cooling air flows into PC (Printed Circuit) board channels. Flow between PC board channels with heat generating blocks is assumed laminar, incompressible, two-dimensional. Geometric parameters (block spacing (S), block height (H), block width (W) and channel height (L)) are held fixed. Inflow angle variations are $-10^{\circ},\;0^{\circ},\;10^{\circ}$, where uniform heat flux per unit axial length Q (W/m) from heated block surfaces is generated. The governing equations for velocity and temperature are solved by SIMPLE (Semi-Implicit Method Pressure for Linked Equation) algorithm. Nusselt number on each block surfaces is analyzed after a numerical calculation result. The result shows that the assumption on parallel inflow (inflow angle to channel, $0^{\circ}$) to PC board channels can be used without large error even when inflow' angle is varied.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4603-4624
• /
• 2016

In this paper, a new reversible watermarking algorithm with adaptive embedding threshold matrix is proposed. Firstly, to avoid the overflow and underflow, two flexible thresholds, TL and TR, are applied to preprocess the image histogram with least histogram shift cost. Secondly, for achieving an optimal or near optimal tradeoff between the embedding capacity and imperceptibility, the embedding threshold matrix, composed of the embedding thresholds of all blocks, is determined adaptively by the combination between the composite chaos and the average energy of Integer Wavelet Transform (IWT) block. As a non-liner system with good randomness, the composite chaos is suitable to search the optimal embedding thresholds. Meanwhile, the average energy of IWT block is calculated to adjust the block embedding capacity, and more data are embedded into those IWT blocks with larger average energy. The experimental results demonstrate that compared with the state-of-the-art reversible watermarking schemes, the proposed scheme has better performance for the tradeoff between the embedding capacity and imperceptibility.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1249-1260
• /
• 2003

This present work focuses on the influence of nonlinearities associated with impact on the rocking behavior of a rigid body block subjected to a two-dimensional excitation in the horizontal and vertical directions. The nonlinearities in rocking system are found to be strongly dependent on the impact between the block and the base that abruptly reduces the kinetic energy. In this study, the rocking systems of the two types are considered : The first is an undamped rocking system model that disregards the energy dissipation during the impact and the second is a damped rocking system, which incorporates energy dissipation during the impact. The response analysis is carried out by a numerical method using a non-dimensional rocking equation in which the variations in the excitation levels are considered. Chaos responses are observed over a wide range of parameter values, and particularly in the case of large vertical displacements, the chaotic characteristics are observed in the time histories, Poincare sections, the power spectral density and the largest Lyapunov exponents of the rocking responses. Complex behavior characteristics of rocking responses are illustrated by the Poincare sections.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1365-1381
• /
• 2023

In this paper, a procedure for evaluating the structural integrity of the PCSG (Printed Circuit Steam Generator) unit block is presented with a simplified FE (finite element) analysis technique by applying the homogenization method. The homogenization method converts an inhomogeneous elastic body into a homogeneous elastic body with same mechanical behaviour. This method is effective when the inhomogeneous elastic body has repetitive microstructures, and thus the method was applied to the sheet assembly among the PCSG unit block components. From the method, the homogenized equivalent elastic constants of the sheet assembly were derived. The validity of the determined material properties was verified by comparing the mechanical behaviour with the reference model. Thermo-mechanical analysis was then performed to evaluate the structural integrity of the PCSG unit block, and it was found that the contact region between the steam header and the sheet assembly is a critical point where large bending stress occurs due to the temperature difference.

• 한국태양에너지학회 논문집
• /
• 제26권3호
• /
• pp.79-87
• /
• 2006

This study aims to presents the applicability of apartment building for renewable energy systems using method of uncomplicated calculation and computer simulation. According to the weather conditions (NASA Surface meteorology and Solar Energy) analysis, it has been found that photovoltaic and wind power system can be applied to apartment buildings application. In case study considering layout and block plan, adaptation of solar water heating, photovoltaic and wind energy system to apartment buildings was proved to produce a profit. And the application strategies of renewable energy systems can be used not only for the investment decisions for economic analysis but also for the comparative analysis of uncomplicated calculation and computer simulation.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.603-607
• /
• 2009

About a Structure is performance external insulation is fundamantal performance for enrgy-saving. these day, most of residential structures have constructed by internal insulation method structure. The method structure internal insulation have construction and economical efficiency, but on the other hand, be generated heat loss by heat bridge especially, be generated loss heat-energy logical consequence in structure ondol. The external insulation structure method has a mert able to minimum to loss heat about heat-bridge. But the external insulation technique is unsatisfactory statues within the know-how and method of construction and materials compared with developed countries. The recently, the requirement of market related to the external insulation technique is resulted by the energy efficiency system, but it can lead to the lack of alternative technique In study on the korea type passive house building design for insulation block method of wall system has to experimental characteristic heat-energy of practice building. In result field-experimental, the heat-bridge appeared to characteristic spent heat-energy of blow 2L class and have a suffience performance it.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.3-12
• /
• 1999

This research concentrates on the influence of non-linearities associated with impact for the nonlinear rocking behavior of rigid block subjected to one dimensional sinusoidal excitation of horizontal direction. The transition of two governing rocking equations, the abrupt reduction in the kinetic energy associated with impact, and sliding motion of block. In this study, two type of rocking vibration system are considered. One is the undamped rocking vibration system, disregarding energy dissipation at impact and the other is the damped rocking system, including energy dissipation and sliding motion. The response analysis using non-dimensional rocking equation is carried out for the change of excitation parameters and friction coefficient. The chaos responses were discovered in the wide response region, particularly, for the case of high excitation amplitude and their chaos characteristics were examined by the time history, Poincare map, power spectra and Lyapunov Exponent of rocking responses. The complex behavior of chaos response, in the phase space, were illustrated by Poincare map. The bifurcation diagram and Poincare map were shown to be effective in order to understand chaos of rocking system.

• 전자공학회논문지B
• /
• 제30B권4호
• /
• pp.130-137
• /
• 1993

In this paper, A progressive coding of mean difference pyramid by Hadamard transform of the difference between two successive pyramid levels has been studied. A block adaptive bit allocation method based on ac energy of each sub-block has been proposed, which efficiently reduces the final distortion in the progressive transmission of image parameters. In our scheme, the dc energy equals the sum of the quantization errors of the Hadamard transform coefficients at previous level. Therefore proposed allocation method includes the estimation of dc energy at each pyramid level. Computer simulation results show some improvements in terms of MSE and picture quality over the conventional fixed allocation scheme.