• 제목/요약/키워드: Energy Balancing

검색결과 292건 처리시간 0.03초

Cell Balancing Scheme with Series Coupling of Multiple Primary Windings for Hybrid Electric Vehicle Lithium-Ion Battery Cells

  • Park, Hong-Sun;Kim, Chong-Eun;Moon, Gun-Woo;Lee, Joong-Hui
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2007년도 하계학술대회 논문집
    • /
    • pp.347-349
    • /
    • 2007
  • Charge equalization scheme for HEV lithium-ion battery system is proposed in this paper, where all the primary windings with in parallel bi-directional switches are coupled in series to provide the equalizing energy from the whole battery string to the specific under charged cells. Moreover, to realize minimized size of equalization circuit employing the proposed cell balancing scheme, the optimal power rating design rule according to equalization time and SOC distribution of imbalance is proposed. A prototype of HEV lithium-ion battery system of four cells shows the outstanding charge equalization performance while maintaining greatly reduced size of cell balancing circuit.

  • PDF

클러스터에 기반한 에너지 효율적 삼각모양 라우팅 프로토콜에 관한 연구 (Research on An Energy Efficient Triangular Shape Routing Protocol based on Clusters)

  • 누루하야티;이경오
    • 한국컴퓨터정보학회논문지
    • /
    • 제16권9호
    • /
    • pp.115-122
    • /
    • 2011
  • 무선 센서 네트워크는 제한된 에너지를 갖는 배터리에 의해 가동되며 한번 배치되면 사용자가 접근할 수 없고 배터리 교환이 불가능하다. 따라서 네트워크의 수명을 늘리기 위하여 네트워크 디자인 시에 에너지 효율성이 매우 중요하게 고려되어야 한다. BCDCP 기법에서는 모든 센서가 CH(클러스터 헤드)로 데이터를 보내고 CH는 BS(베이스 스테이션)로 취합된 데이터를 송신하는 효율적 클러스터링 프로토콜이지만 규모가 큰 네트워크에서는 적합하지 않으며 노드들의 물리적 위치를 고려하지 않기 때문에 효율성이 떨어진다. UCR 기법의 경우 BS에와 노드들의 거리만을 고려하기 때문에 BS에 가까운 노드가 빨리 죽는 문제가 있다. 본 논문에서는 균형된 에너지 소비를 통하여 네트워크 수명을 늘리기 위한 삼각모양 클러스터 라우팅 프로토콜(TSCRP- Triangular Shape Cluster Routing Protcol)을 제안한다. 본 기법은 비교적 간단하게 운영되기 때문에 헤드 선출에 필요한 오버헤드가 적고 센서들의 에너지 보유량뿐만이 아니라 센서들과 BS간의 거리를 유기적으로 결합하여 리더 노드를 선정하기 때문에 다른 기법에 비해 효율적이다. 실험에 의하면 TSCRP가 LEACH, BCDCP, UCR보다 우수한 것으로 나타났다.

능동형 셀 발란싱 기능을 갖는 배터리 관리 시스템 (BMS with Active Cell Balancing)

  • 정윤이;박광언;정한주;이홍기
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 춘계학술대회 초록집
    • /
    • pp.146.1-146.1
    • /
    • 2010
  • 최근 전력 수요의 증가와 지구 온난화 문제가 화두가 되면서 피크 전력관리와 스마트 그리드의 필요성이 강조되고 있다. 이들을 구현하기위해 반드시 필요한 것이 에너지 저장 시스템이다. 본 발표는 배터리 에너지 저장 시스템에 사용되는 능동형 셀 발란싱 기능을 갖는 배터리 관리 시스템에 관한 것이다. 전력 에너지 저장용 배터리는 원하는 전압과 전력을 저장하기위해 단전지(Cell)들을 보통 수천 개가 직렬 병렬로 연결되어 구성된다. 배터리팩을 구성하는 단전지 한 개의 용량이 다른 단전지 보다 크거나 작던지 또는 한 개의 단전지에 문제가 생기면 배터리팩 전체의 성능이 저하되든가 또는 사용 할 수가 없게 된다. 따라서 배터리팩을 구성 할 때는 용량이 동일 한 단전지들을 사용한다. 에너지 저장용 배터리팩에는 수백 와트의 단전지 들이 사용되므로 에너지 저장용 배터리팩을 위한 단전지 생산에는 많은 어려움이 있다. 능동형 셀 발란싱 기술을 사용 하면 이러한 배터리팩의 문제를 해결 할 수 있어 셀 제조원가를 절감 할 수 있을 뿐만 아니라 배터리팩의 가용용량을 늘릴 수 있고 또한 배터리팩의 수명을 연장 할 수 있다.

  • PDF

트리 기반 센서네트워크에서 전력 소모 균형을 위한 슬랏 스케쥴링 알고리즘 (A Slot Scheduling Algorithm for Balancing Power Consumption in Tree-based Sensor Networks)

  • 김제욱;오훈
    • 한국통신학회논문지
    • /
    • 제36권5A호
    • /
    • pp.502-510
    • /
    • 2011
  • 본 논문에서는 트리 기반의 센서네트워크에서 전력소모의 균형을 이루기 위한 시간 슬랏을 할당하는 알고리즘을 제안한다. 트리 토폴로지를 갖는 센서네트워크에서는 낮은 트리 깊이를 갖는 노드들이 더 많은 패킷을 처리하기 때문에 더 많은 전력을 소모한다. 따라서, 네트워크 생명이 단축되는 문제가 있다. 본 논문에서 제안하는 슬랏 스케줄링 알고리즘은 각 노드에게 수신 슬랏들을 먼저 할당하고 송신 슬랏들을 할당한다. 이러한 할당 방식은 패킷 결합과 필터링을 용이하게 하기 때문에 낮은 트리 깊이에 위치한 노드들의 부하를 감소시키는 효과가 있다. 시뮬레이션을 사용하여 제안한 알고리즘을 TreeMAC 에서 제안한 프레임-슬랏 할당 알고리즘과 비교함으로써 전력소모의 균형을 이룬다는 것을 확인하였다.

공동주택 온수난방 시스템의 적정 열공급을 위한 배관망 시뮬레이션 (Simulation of Pipe Network for Optimum Heat Supply in the Hot Water Heating System of Apartment House)

  • 김주용;민만기;최영돈
    • 설비공학논문집
    • /
    • 제5권3호
    • /
    • pp.157-168
    • /
    • 1993
  • Pipe network of hot water heat supply system in an apartment house was analyzed. Flowrate and supply heat capacity of each household in which constant flowrate balancing valve is installed in a single zone system were calculated and the results were investigated. In the existing piping system, the non-uniformity of heat supply with floors due to the static pressure and temperature difference between supply main and return main can not be avoided and this tendency get intense with the increase of the height of building. The non-uniformity of heat supply can be prevented by the installation of balancing valve at each household, however if the performance of supply pump is not sufficient to overcome the energy loss due to the installation of balancing valve for constant flow rate or if the selection of the valve capacity is not adequate, the valves will may lose their controllability.

  • PDF

Efficient Dual-layered Hierarchical Routing Scheme for Wireless Sensor Networks

  • Yoon, Mahn-Suk;Kim, Hyun-Sung;Lee, Sung-Woon
    • 한국산업정보학회:학술대회논문집
    • /
    • 한국산업정보학회 2008년도 추계 공동 국제학술대회
    • /
    • pp.507-511
    • /
    • 2008
  • Supporting energy efficiency and load balancing in wireless sensor network is the most important issue in devising the hierarchical routing protocols. Recently, the dual layered clustering scheme with GPS was proposed for the supporting of load balancing for cluster heads but there would be many collided messages in the overlapped area between two layers. Thereby, the purpose of this paper is to reduce the collision rate in the overlapped layer by concisely distinguish them with the same number of nodes in them. For the layer partition, this paper uses an equation $x^2+ y^2{\le}(\frac{R}{\sqrt{2\pi}})^2$ to distinguish layers. By using it, the scheme could efficiently distinguish two layers and gets the balanced number of elements in them. Therefore, the proposed routing scheme could prolong the overall network life cycle about 10% compared to the previous two layered clustering scheme.

  • PDF

효율적인 에너지 관리를 위해 리튬이온 배터리를 적용한 능동 셀 벨런싱 시스템 BMS(Battery Management System)에 관한 연구 (A Study on the BMS(Battery Management System) of Active Cell Balancing System using Lithium Ion Battery for Efficient Energy Management)

  • 김재진
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2017년도 제56차 하계학술대회논문집 25권2호
    • /
    • pp.388-389
    • /
    • 2017
  • 본 논문에서는 효율적인 에너지 관리를 위해 리튬이온 배터리를 적용 능동 셀 밸런싱 시스템 BMS에 대해 제안하였다. 제안된 방법은 다수의 셀과 하나의 커패시터로 구성된 SSC(Single Switched Capacitor) 방식에서 사용되는 커패시터를 리튬이온 배터리로 변경하여 적용한 것이다. SSC 방식은 커패시터의 방향성으로 인하여 홀수 번째와 짝수 번째의 배터리에 대해 별도의 스위치를 설치하여야 하며 조작이 복잡하다는 단점을 가지고 있었다. 이러한 단점을 보완하여 커패시터를 리튬이온 배터리로 대체하여 셀의 순서에 상관없이 적용이 가능한 셀 밸런싱 방법을 제안하였다. 제안된 방법의 효율성은 BMS를 구현하여 실험 하였다. 실험 결과 셀 밸런싱이 기존의 SSC 방식보다 개선되어 효율성이 입증되었다.

  • PDF

출력 전압 밸런싱 기능을 가진 비절연형 3-레벨 고승압 부스트 컨버터 (A Non-Isolated 3-Level High Step-Up Boost Converter With Output Voltage Balancing)

  • 윤성현;강혜민;차헌녕;김흥근
    • 전력전자학회논문지
    • /
    • 제20권5호
    • /
    • pp.464-470
    • /
    • 2015
  • In this paper, a non-isolated three-level high step-up boost converter with output voltage balancing is proposed. By adding one extra inductor to the conventional three-level boost converter, the proposed converter is derived. Compared with the traditional boost converter and the three-level boost converter, the proposed converter can obtain very high voltage conversion ratio, and the voltage and current stress of switching devices and diodes are reduced. A 2.7 kW prototype converter is built and tested to verify performances of the proposed converter.

혼합형 병렬처리 및 파이프라이닝을 활용한 소수 연산 알고리즘 (Performance Enhancement of Parallel Prime Sieving with Hybrid Programming and Pipeline Scheduling)

  • 유승요;김동승
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제4권10호
    • /
    • pp.337-342
    • /
    • 2015
  • 이 논문에서는 소수 추출 방법인 Sieve of Eratosthenes 알고리즘을 병렬화하여 실행 시간과 에너지 소모 면에서 개선된 효과를 얻고자 실험을 진행하였다. 성능 개선을 위해 부하 균등화를 정교하게 조절하도록 파이프라인 작업 방식을 도입하였고, 멀티코어 컴퓨터 클러스터에 하이브리드 병렬 프로그래밍 모델을 활용하여 효과를 높였다. 소규모 컴퓨터 클러스터와 저전력 컴퓨터에서 구현, 실험한 결과 이전 방식보다 연산 속도가 향상되었고, 에너지 사용량도 감소함을 확인하였다.

Two-Stage Charge Equalization Scheme for Hybrid Electric Vehicle Lithium-Ion Battery Cells

  • Park, Hong-Sun;Kim, Chong-Eun;Moon, Gun-Woo;Lee, Joong-hui
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2007년도 하계학술대회 논문집
    • /
    • pp.241-243
    • /
    • 2007
  • Two-stage charge equalization scheme for HEV lithium-ion battery string is proposed with the optimal power rating design rule in this paper, where in the first stage the over charged energy of higher voltage cells is drawn out to the single common output capacitor and then, that discharged energy is recovered into the overall battery stack in the second stage. To achieve charge equalization of sort, the conventional flyback DC/DC converters of low power and minimized size are employed. The industrial sample employing both the proposed two-stage cell balancing scheme and the optimal power rating design rule shows good cell balancing performance with reduced size as well as low voltage stresses of the electronic devices.

  • PDF