• 펄프종이기술
• /
• 제45권1호
• /
• pp.1-5
• /
• 2013

Printing papers published in between 1950's and 1990's were treated with three methods such as distilled water washing, $CaCO_3$ solution washing and methyl cellulose solution coating for improving their conservational properties. Accelerated aging with $80^{\circ}C$ and 80% RH for 14 days was applied to the testing papers. Results showed that distilled water and $CaCO_3$ washing kept increased pH even after accelerated aging, but did not improve folding endurances for 1950's-60's papers. Methyl cellulose treatment did not increased pH of the old papers, but increased folding endurances remarkably for 1950's-60's papers even after accelerated aging. It suggests that methyl cellulose treatment after $CaCO_3$ washing should give improvements both in pH and folding endurance.

• 생약학회지
• /
• 제39권4호
• /
• pp.341-346
• /
• 2008

The effects of the ethanol extracts from Gynostemma pentaphyllum (GP extracts) on body weights, grip strengths, endurances and catecholamine levels after electric footshock (EF) stress in mice and rats were investigated. The animals were treated with GP extracts (50 mg/kg/day, p.o.) for 21 days before exposure to EF (duration and interval 10 sec for 3 min, 2 mA) once a day. The increases in body weights were delayed by 13.1% of the control levels by EF-induced stress in mice, which were recovered to 24.1% of the control levels in GP extract-treated groups. The grip strengths were significantly decreased by EF stress in mice and the EF-stressed groups treated with GP extracts increased grip strengths to 115.2% compared to control levels. The endurance times by forced swimming, which reduced significantly by EF stress, were also maintained similar to control levels by GP extracts in rats. In addition, the levels of norepinephrine and epinephrine in serum and brain, and dopamine in brain were significantly increased to 17.5-95.0% of the control levels after exposure of EF stress in mice. However, EF stressinduced increases in norepinephrine and epinephrine in serum were reduced to 17.1-17.3% of the control levels by treatments of GP extracts, and those in dopamine, norepinephrine and epinephrine in brain were also reduced to 5.0-19.5%. These results suggest that GP extracts showed the protective effects on EF stress-induced physiological functions and can be developed as the promising anti-stress agents.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2006년도 ISMP 2006
• /
• pp.125-134
• /
• 2006

Process & mechanism $\blacklozenge$ The process consists from two steps which are laser processing step and separation steop. $\blacklozenge$ The wavelength of laser beam is transmissible wavelength for the wafer. However, inside of Si wafer is processed due to temperature dependence of optical absorption coefficient Advantage & Application $\blacklozenge$ Advantages are high speed dicing, no debris contaminants, completely dry process, etc. $\blacklozenge$ The cutting edges were fine, The lifetime and endurances did not degrade the device characteristics $\blacklozenge$ A separation of a wafer with DAF was introduced as an application for SiP

• 펄프종이기술
• /
• 제32권1호
• /
• pp.72-78
• /
• 2000

The major cause of paper deterioration is the acid-catalyzed hydrolysis of the cellulose in paper fibres. The deacidification of paper reduced the rate of this deterioration, and it has been reported to extend the useful life of acidic paper by three to five times. It has been recognized the need for an effective method of deacidifying large quantities of books and documents. T도 review of the current state of deacidification technology has been published recently. The paper points to the immediate need for a cost-effective and reliable method to save the millions of books that prish every year. It was tried to deacidify by the gaseous ethanolamine for solving with the above the problem. Acidic paper was treated with the monoethanolamine, diethanolamine, triehtanolamine. It result, it was found that the rate of deacidification was in caused very little grightness and fold endurances. For solving this problem, it was carried with deacidify by combination treatment of the various gaseous ehtnaloamines. In result, decreasing of brightness and fold endurance is reduced.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.196-197
• /
• 2011

Rudder, one of the most important component in the marine vessel, is now being decreased life time to serve due to cavitation erosion, vortex current, high flow speed suffer from ship speed going up dramatically. In this study, 10 kinds of thermal spray coating materials(2 of Zn alloy series, 3 of Al alloy series, 3 of Cu alloy series, 2 of STS alloy series) are chosen to apply on specimens and analyze micro structure, metallic composition, properties(porosity, oxidation) by using visual observation, XRD, EDX etc.. Additionally, to refine the characteristic of corrosion endurance for thermal spray coating layer, compared with thermal spray process and 5 kinds of heavy duty painting and AC paint (Anti-Corrosion Paint). Based on above mentioned experimental results, a priority of all coated specimens on corrosion-erosion endurances finalized and summarized there by desirable composition and process of thermal sprayed material properly.

• Tribology and Lubricants
• /
• 제37권5호
• /
• pp.179-188
• /
• 2021

Reputed for their low friction coefficient and wear protection effect, diamond-like carbon (DLC) materials are considered amongst the most important lubricant coatings for tribological applications. In this framework, this investigation aims to elucidate the effect of a few operating parameters, such as applied stress and sliding amplitude on the friction lifetime of DLC coatings. Fretting wear tests are conducted using a 12.7 mm radius counterpart of 52100 steel balls slid against a substrate of the same material coated with a 2 ㎛ thickness DLC. Approximately, 5 to 57 N force is applied, generating a maximum Hertzian contact pressure of 430 to 662 MPa, corresponding to the applied force. The coefficient of friction (CoF) generates three regimes, first a running-in period regime, followed by a steady-state evolution regime, and finally a progressive increase of the CoF reaching the steel CoF value, as an indicator of reaching the substrate. To track the wear scenario, interrupted tests are performed with analysis combining scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), 3D profilometer and micro-Raman spectroscopy. The results show two endurance values: one characterizing the coating failure (Nc₁), and the other (Nc₂) indicating the friction failure which is situated where the CoF reaches a threshold value of μ_th = 0.3 in the third regime. The Archard energy density factor is used to determine the two endurance values (Nc₁, Nc₂). Based on this approach, a master curve is established delimitating both the coating and the friction endurances.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권4호
• /
• pp.449-457
• /
• 2012

The program/erase (P/E) cyclic endurances including bias temperature instability (BTI) behaviors of Metal-$Al_2O_3$-Nitride-Oxide-Semiconductor (MANOS) memories are investigated in comparison with those of Semiconductor-Oxide-Nitride-Oxide-Semiconductor (SONOS) memories. In terms of BTI behaviors, the SONOS power-law exponent n is ~0.3 independent of the P/E cycle and the temperature in the case of programmed cell, and 0.36~0.66 sensitive to the temperature in case of erased cell. Physical mechanisms are observed with thermally activated $h^*$ diffusion-induced Si/$SiO_2$ interface trap ($N_{IT}$) curing and Poole-Frenkel emission of holes trapped in border trap in the bottom oxide ($N_{OT}$). In terms of the BTI behavior in MANOS memory cells, the power-law exponent is n=0.4~0.9 in the programmed cell and n=0.65~1.2 in the erased cell, which means that the power law is strong function of the number of P/E cycles, not of the temperature. Related mechanism is can be explained by the competition between the cycle-induced degradation of P/E efficiency and the temperature-controlled $h^*$ diffusion followed by $N_{IT}$ passivation.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.114-119
• /
• 2006

High critical current density, high n value, multiple faults endurances, and fast recovery characteristics of YBCO thin films are very attractive characteristics for developing resistive type superconducting fault current limiters. But due to the limited current and voltage ratings of one YBCO module, it is needed to construct series and parallel module connections for high capacity electric networks. Especially for distribution network, more than 30 units should be connected in series to meet voltage level. So in order to construct distribution-level superconducting fault current limiter, simultaneous quench in one YBCO thin films should be realized, and furthermore, quench should be occurred in all fault current limiting units equally to avoid local heating and failures. In this paper, we proposed optimum design of YBCO thin films for fault current limiting module and technical method using shunt resistor to achieve simultaneous quench between multi current limiting units. From the analytical and the experimental results, optimal current path and thickness of shunt material was determined for YBCO thin films and shunt resistor between modules was developed. Finally, 14 kV one phase resistive fault current limiter using multi YBCO thin films was constructed and it was possible to get satisfactory test results.

• 한국인터넷방송통신학회논문지
• /
• 제22권6호
• /
• pp.57-62
• /
• 2022

최근 상변화메모리와 같은 고속 스토리지 매체의 출현으로 느린 디스크 스토리지에 적합하게 설계된 메모리 관리 기법에 대한 재고가 필요한 시점에 이르렀다. 본 논문에서는 상변화메모리를 가상메모리의 스왑장치로 이용하는 시스템을 위한 새로운 페이지 교체 정책을 제안한다. 제안하는 방식은 페이지 교체 정책이 전통적으로 추구하던 페이지 폴트 횟수 절감뿐 아니라 스왑 장치에 발생하는 쓰기량 절감을 동시에 추구한다. 이는 상변화메모리의 쓰기 연산이 느리고 쓰기 횟수에 제한이 있다는 점에 착안한 것이다. 구체적으로 살펴보면 메모리 부하가 높은 경우 페이지 폴트를 줄이는 데에 초점을 맞추고 메모리 공간에 여유가 있을 경우 스토리지 쓰기량을 줄이는 적응적인 방식을 채택한다. 이를 통해 제안하는 정책이 메모리 시스템의 성능을 저하시키지 않으면서 스토리지 쓰기량을 크게 절감함을 다양한 워크로드의 메모리 참조 트레이스를 재현하는 시뮬레이션 실험을 통해 보인다.

• 임산에너지
• /
• 제21권2호
• /
• pp.25-33
• /
• 2002

도서관이나 문서보관소에서 책이나 서류를 보존하는데 있어 중요한 문제점 중의 하나는 종이의 열화이다. 그러므로 이러한 문제를 해결하기 위해서는 종이의 열화의 주요 원인을 규명할 필요가 있다. 몇몇의 학자들이 이에 대한 연구를 수행한 결과 종이 열화의 주요 원인으로서 종이 섬유내 셀룰로오스의 산 촉매 가수분해로 밝혀졌다. 일반적으로 종이제조시 첨가되는 첨가제로 인해 산성지의 노화율이 중성지의 노화율에 비해 더 높다. 따라서 종이내 존재하는 산을 제거해 줄 필요가 있다. 종이의 탈산화 처리는 열화속도를 감소시켜 산성지의 수명을 3, 4배정도 늘릴 수 있다고 한다. 최근에는 기존의 탈산화 처리방법과는달리 대량의 책과 서류의 탈산화를 위한 효과적인 탈산화 방법의 필요성이 인식되어져 왔다. 따라서 본 논문에서는 종이 제조시 사용되는 첨가제가 노화에 미치는 영향을 알아보고,효과적인 종이의 노화 방지를 위해 산성지에 가스상 에탄올아민류(모노에탄올아민, 디에탄올아민, 트리에탄올아민)를 사용하여 탈산처리를 시도하여 보았다. 첨가제가 종이의 노화에미치는 영향을 실험한 결과, 종이의 노화율이 알럼＋로진＞알럼＞AKD＞ 무처리 순으로 나타났다. 또한 가스상 에탄올아민류 탈산처리 실험결과, 탈산처리율이 모노에탄올아민＞디에탄올아민＞트리에탄올아민 순으로 나타났다. 그러나 처리 후 종이에 약간의 백색도와 내절도의 감소가 나타났다. 이러한 문제를 해결하기 위해 가스상 에탄올아민류들을 조합 처리하여 탈산처리를 시도해 본 결과, 백색도와 내절도의 감소없이 효과적인 탈산처리 효과를 얻을 수 있었다.ird limit" is characterized by the production of reduction of $H_2O$$_2$, which is reduced by wall effect. Strain rate substantially affects ignition temperature because key reaction rates of $H_2O$$_2$ are comparably with its transport rate, while the mixture temperature and the hydrogen composition do not significantly affect ignition temperature.e.성 면역 결핍증 환자가 직업을 가지면 안된다는 사람보다 된다는 사람이(P<0.001), 각각 지식이 높았다. 결론 : 지식이 높을수록 성병에 걸릴 가능성이 낮고, 태도에서도 긍정적인 결과를 보였다. 그러므로 그러므로 가능하면 중고교 시절에 이 질환에 대한 정규교육 프로그램을 만들어 학생들을 효과적으로 가르치는 것이 필요하다.와 활동성 정도(r=0.378, P<.05), 평균 통증정도와 활동성 정도가(r=.330, P<.05)가 유의한 정적상관관계가 나타난 반면, 여성에서는 활동성 정도와 통증의 중증도는 유의한 관계가 없는 것으로 나타났다. 남성은 관계를 제외한 모든 항목의 통증으로 인한 지장정도와 활동성 정도가 유의한 정적상관관계가 나타난 반만 여성에서는 보행 능력, 통상적인