• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.57-64
• /
• 2010

A performance test of inter propellant seal for a 75 ton class turbopump is conducted using water to evaluate leakage and endurance performance. Each part of fuel pump side and oxidizer pump side for a prototype inter propellant seal has been tested for verifying endurance performance during total accumulated test time 2,100 sec in water. The fuel pump side part with one-stage seal of carbon floating ring shows average leakage rate 13.7 gram/sec under average seal differential pressure 9.4 bar. On the other hand, the oxidizer pump side part with two-stage seal assembly of carbon floating rings shows average leakage rate 7.3 gram/sec under average seal differential pressure 9.5 bar. After the endurance performance test, the inter propellant seal shows good physical condition. A leakage performance test of the inter propellant seal for cryogenic environment will be performed using LN2 in the near future.

• Journal of Life Science
• /
• v.18 no.1
• /
• pp.30-37
• /
• 2008

The purpose of this study was to investigate the effect of Isotonic Training and Isotonic isometric complex Training to Knee joint Isokinetic muscle function in the high-school Taekwondo athlete. This subjects were randomly divided into two groups; a Isotonic Training group (n=7) Isotonic isometric complex Training group (n=7), Taekwondo athletes share each, 12 weeks between executes a motion. peak torque, H/Q ratio, bilateral muscular ratio muscular endurance of knee joint measured. For this study, two-way ANOVA with repeated measure were used. The result of this study presents between groups was not plain difference expressed. H/Q ratio, bilateral muscular ratio, muscular endurance was plain difference expressed after 12 weeks point of time (p>0.05) and peak torque was plain difference expressed (p<0.05). Conclusion each group did not appear all but one (peak torque), but point of view exercise was effect H/Q ratio, bilateral muscular ratio, muscular endurance, peak torque plain difference expressed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1937-1941
• /
• 2014

The effects of Tabebuia avellanedae (Taheebo) on exercise endurance capacity were investigated using mice in an adjustable-current water pool. Compared to the control group, a 1.8~2.0 fold increase in swimming time was observed in mice administered hot water extract (TAW) and 80% ethanol extract (TAE) of inner bark from T. avellanedae. Blood lactate level, an important fatigue relevance factor, was significantly lower in the TAW and TAE groups than in the control group. The total phenolic contents of TAW and TAE were $93.3{\pm}1.6$ and $115.7{\pm}1.5mgGAE/g$, respectively. The levels of flavonoids in the extracts were $77.3{\pm}1.3$ and $95.9{\pm}1.7mgCE/g$, respectively. Higher antioxidant activities of TAE were observed in each assay at the same concentration as compared to TAW. Correlation between antioxidant activities of TAE with total polyphenol contents was observed. These results suggest that extracts of Taheebo increase exercise endurance capacity by elevating antioxidative potentials.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.47-53
• /
• 2010

A performance test of a 75 ton class turbopump inter propellant seal is conducted using water to evaluate leakage and endurance performance. Each fuel pump side part and oxidizer pump side part of a prototype inter propellant seal has been tested for verifying endurance performance during total accumulated test time 2,100 sec in water. The fuel pump side part with 1 stage carbon floating ring seal shows average leakage rate 13.7 gram/sec under average seal differential pressure 9.4 bar. On the other hand, the LOx pump side part with 2 stage carbon floating ring seal shows average leakage rate 7.3 gram/sec under average seal differential pressure 9.5 bar. After the endurance performance test, the inter propellant seal shows good physical condition. A cryogenic leakage performance test of the inter propellant seal will be performed using LN2 in the near future.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.53-53
• /
• 2009

Charge trap flash memory devices with modified tunneling barriers were fabricated using the tunneling barrier engineering technique. Variable oxide thickness (VARIOT) barrier and CRESTED barrier consisting of thin $SiO_2$ and $Si_3N_4$ dielectric layers were used as engineered tunneling barriers. The VARIOT type tunneling barrier composed of oxide-nitride-oxide (ONO) layers revealed reliable electrical characteristics; long retention time and superior endurance. On the other hand, the CRESTED tunneling barrier composed of nitride-oxide-nitride (NON) layers showed degraded retention and endurance characteristics. It is found that the degradation of NON barrier is associated with the increase of interface state density at tunneling barrier/silicon channel by programming and erasing (P/E) stress.

• The Journal of Korean Physical Therapy
• /
• v.27 no.5
• /
• pp.351-355
• /
• 2015

Purpose: This study was conducted to determine how stimulation using Russian current changes isokinetic exercise performance of quadriceps muscle and its antagonist muscles. Methods: Subjects were 20 20-year-old healthy adults who were instructed in the flexion to extension of knees in angular velocity $60^{\circ}/sec$ and $180^{\circ}/sec$ using a Biodex (Biodex system 3). We measured the difference in muscle performance between the Russian current stimulated at the same time during the flexion to extension of knees and not stimulated. Results: The results showed that when Russian current stimulation was applied at the angular velocity $60^{\circ}/sec$, the flexed and extended muscles and the angular velocity $180^{\circ}/sec$ increased significantly, but the peak torque of flexing muscles at the angular velocity $180^{\circ}/sec$ did not increase. Conclusion: These findings suggest that Russian current stimulation with isokinetic exercise of the knee joint could affect the quadriceps muscle and its antagonist muscle performance of muscle strength and endurance.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.5
• /
• pp.290-292
• /
• 2015

We have reported about bipolar resistive switching effect on Poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]:Graphene oxide composite films, which are sandwiched between aluminum and indium tin oxide electrodes. In this case, I-V sweep curve showed a hysteretic behavior, which varied according to the polarity of the applied voltage bias. The device exhibited excellent switching characteristics, with the ON/OFF ratio being approximately two orders in magnitude. The device had good endurance (10⁵ cycles without degradation) and long retention time (5 × 10³ s) at room temperature. The bistable switching behavior varied according to the trapping and de-trapping of charges on GO sites; the carrier transport was described using the space-charge-limited current (SCLC) model.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.173-179
• /
• 1998

The processing conditions for the synthesis of platelet WS$_2$ lubricant powder through the solid-gas reaction were optimized. The tungsten and sulfur powders were sealed in a vacuum of 10$^{-6}$ torr, prior to heat-treating at 850$\circ$C for 8 days. The react~on product showed the well-developed platelet WS$_2$ powder with an average size of 3.8 $\mu$m. The synthesized WS$_2$ powder was coated on the commercial deep grooved ball bearing (No. 6203) to examine the effects of WS$_2$ coating layer on the noise and endurance of the ball bearing. The level of noise obtained from WS$_2$ coated-ball bearing was higher (56 dB) than the value occurred in the case of greece (37 dB). The life-time of the ball-bearing assembled after coating WS$_2$ powder increased 50 times compared to the non-coated bali-bearing.

• Tribology and Lubricants
• /
• v.27 no.1
• /
• pp.25-33
• /
• 2011

Rolling contact ball bearings are utilized almost exclusively for liquid propellant rocket engine turbopump. Turbopump ball bearings are required to endure high speed and high load for a poor lubricated condition in cryogenic environment. To evaluate bearing heat generation performance, friction torque is investigated as a function of rotation speed, bearing load and cooling flow rate through an experimental study using water coolants. Radial and axial loads are simultaneously applied to the test bearing by gas pressurized cylinder rod. Endurance performance of bearing has been also verified under the bearing required load for operating condition during total accumulated test time 2,100 sec.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1151-1152
• /
• 2006

In this paper, we examined 10 domestic samples of three different model using thermal, humidity freeze, thermal-endurance and damp heat test under IEC61215 photovoltaic module environmental endurance test condition. Three was almost no changes on power generation. Insulation resistance capacity was much higher than judgement standard but, showed unstable results depending on environmental test items. On external appearance test, there were two models which showed bubble, humidity penetration, seal melted frame phenomenon. From this results, the degree of aging under the external environment is a main cause that shortens photovoltaic module life time. So it is considered that the efforts for finding optimum condition of manufacturing process should be needed.