• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.193-196
• /
• 2006

A carbonation shortens the endurance life of RC structure. So, to lengthen endurance life of RC structure, we use some kinds of surface-finishes. Because surface-finishes have abilities such as restraint against penetration and diffusion of CO2. In this study, we wanted to know whether we can evaluate the restrain effect of each surface-finish against carbonation with using FEM analysis. After study, we found that it is possible and we also evaluate the restrain effect of any other surface-finishes against carbonation through this process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.2
• /
• pp.113-117
• /
• 2007

We have investigated the effects of doping concentration in polysilicon floating gate on the endurance characteristics of the EEPROM cell haying the structure of spacer select transistor. Several samples were prepared with different implantation conditions of phosphorus for the floating gate. Results show the dependence of doping concentration in polysilicon floating gate on performance of EEPROM cell from the floating gate engineering point of view. All of the samples were endured up to half million programming/erasing cycle. However, the best $program-{\Delta}V_{T}$ characteristic was obtained in the cell doped at the dose of $1{\times}10^{15}/cm^{2}$.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.481-484
• /
• 2006

This study investigates the engineering and fire endurance properties of ultra high strength concrete. The mixture proportions with water to binder ratios (W/B) of 0.15 and 0.25 consist of various adding ratios, such as 0, 0.05, 0.1, 0.15, 0.2, 0.25 and 0.3 percent respectively, of polypropylene (PP) fiber. As for the parameters of specimens, fluidity, compressive strength and unloading fire test were carried out. Test showed that an increase of fiber contents had the favorable properties in fire endurance performance; specimens in W/B 15% required 0.3vol% of PP fiber and specimens in W/B 25% needed only 0.1vol% to prevent spalling.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.807-814
• /
• 2015

A control rod drive mechanism(CRDM) is a reactor regulating system, which inserts, withdraws or maintains a control rod containing a neutron absorbing material within a reactor core to control the reactivity of the core. The top-mounted CRDM for Jordan Research and Training Reactor(JRTR) with 5 MW power has been designed and fabricated based on the HANARO's experience through KAERI and DAEWOO consortium project. This paper describes the performance qualification test results to demonstrate the operability of a prototype and four production CRDMs during the reactor lifetime. The driving performance, the drop performance and the endurance tests for CRDM are carried out at a test rig simulating the actual reactor conditions. A vibration of internal components due to the coolant flow is also measured using a laser vibrometer. As a result, the CRDMs are driven having a good driving performance without a malfunction between command and output signals for the stepping motor. Also, the pure drop time and the impact acceleration are within 0.72 s and 4.2 g to meet the design requirements, and the vibrational displacement of control rod is measured as maximum $5.2{\mu}m$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.897-904
• /
• 2017

Optical equipment consists of various components, and a detector is mounted and operated on aircraft, tanks, and warships for target detection and classification. The structural stability and optical performance of aeronautical optical equipment operated at several kilometers of altitude are degraded owing to vibration generated in the aircraft. It is necessary to verify the structural stability and optical performance requirements of the equipment in vibration environment conditions during the design phase. In this study, vibration environment conditions were analyzed using a test standard and the measurements of the vibration generated in aircraft. The conditions were classified as endurance and operating vibration conditions for structural stability and optical performance verification, respectively. The structural stability was verified according to natural frequency analysis, response analysis for the endurance vibration condition, and static analysis. The optical performance was verified by applying the vibration response analysis results to the optical design/analysis program.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.3
• /
• pp.103-112
• /
• 2018

Purpose : The purpose of this study was to determined the effects of resistance and aerobic exercise on gait ability, physical fitness and body compositions in older women. Method : The subjects were 24 older women who were randomly divided into two groups (resistance exercise, n=12, and aerobic exercise, n=12). They 65~80 years old. The subjects done the Gym-ball, Togu, and senior dance exercise three times per week-for 70 minutes each time for 16 weeks. Body compositions, physical fitness, and gait ability were measured in this study. Result : There were significantly improved the walk performance after exercise training for 16 weeks. In particular, it was more effective on resistance exercise training in older women. There were significant differences in muscle endurance, flexibility, balance, body weight, percent of body fat, and body mass index (BMI) after the exercise program. Conclusion : It was more effective improved on muscle endurance, flexibility, and balance performance after resistance exercise program than an aerobic exercise program in older women.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.334-341
• /
• 2020

Through a investigation of the physical activity status of 1794 undergraduates who were non-sports majors from freshman to senior in Jiangxi Normal University, to analyze physical fitness status of college students with different physical activity levels. The results showed that in physical activity, high-intensity physical activity of male was higher than female, while medium-intensity and low-intensity (insufficient) physical activity of female was higher than male. College students' high-intensity physical activity group's physical test scores were better than the medium-intensity physical activity group, and the medium-intensity physical activity group was superior to the low physical activity group. In terms of physical fitness, among the test indicators of body shape and physiological function, the vital capacity and body mass index of male and female were ranked at a pass level. In the physical fitness test indicators, the performance of college students' endurance qualities was better while the overall performance of strength qualities was lower. The overall fitness of college students was ranked at a pass level, and the physical test scores of female were better than male.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.149-159
• /
• 2009

The purposes of this study are to evaluate physical performance of metallic Jacquard fabrics, and to contribute to the research and development of the women's suit made of the metallic Jacquard fabrics. First, eight fabrics were woven with two kinds of warp yarns(nylon and rayon) and weft yarn blended with various contents(0, 7, 14, 21%) of metallic yarn. Second, the mechanical properties were measured by using the KES-FB system, and physical properties such as tensile strength, tearing strength, abrasion resistance, drape, pilling, snagging, degree of crease resistance, flexural stiffness, specular gloss, folding endurance and electrostatic propensity were measured. The results were as follows. As the metal fiber content increased, bending, shear, thickness and weight increased, which imply low recovery of wrinkles. It means that metallic Jacquard fabrics enable to use as a memory fabric. 7% metallic Jacquard fabric showed a low value at total hand value, but there was little change. As the metal fiber content increased, tensile strength, tearing strength, drape coefficient, specular gloss and flexural stiffness increased, however the degree of crease resistance, electrostatic propensity and folding endurance decreased. The metallic Jacquard fabrics were excellent in snagging, abrasion resistance and pilling.

• 한국연소학회:학술대회논문집
• /
• 2012.11a
• /
• pp.287-289
• /
• 2012

The research and development history of the gas turbine combustor in Korea is introduced briefly. It is very important to understand the fuel spray, mixing phenomena in achieving combustion performance. In this paper, two kinds of fuel injection system such as duplex fuel injector and rotary spray system are introduced in developing gas turbine combustor in Korea. The extensive experimental research of fuel spray, ignition, performance and endurance rig test makes gas turbine combustor successfully in Korea.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.3
• /
• pp.432-441
• /
• 2016

Solar energy is the ideal power choice for long-endurance stratospheric airships. The output performance of solar array on stratospheric airship is affected by several major factors: flying latitude, flight date, airship's attitude and the temperature of solar cell, but the research on the effect of these factors on output performance is rare. This paper establishes a new simplified analytical model with thermal effects to analyze the output performance of the solar array. This model consisting of the geometric model of stratospheric airship, solar radiation model and incident solar radiation model is developed using MATLAB computer program. Based on this model, the effects of the major factors on the output performance of the solar array are investigated expediently and easily. In the course of the research, the output power of solar array is calculated for five airship's latitudes of $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $45^{\circ}$ and $60^{\circ}$, four special dates and different attitudes of five pitch angles and four yaw angles. The effect of these factors on output performance is discussed in detail. The results are helpful for solving the energy problem of the long endurance airship and planning the airline.