• 한국안전학회지
• /
• 제28권3호
• /
• pp.1-5
• /
• 2013

In order to evaluate fatigue endurance for an MTB(mountain bike) frame, FEM(finite element method) analysis was performed. For evaluating the fatigue endurance of the MTB frame, the S-N data for Al-6061 fillet weldment were compared with the stress analysis results through FEM analysis of the frame. Three loading condition, pedalling, horizontal and vertical loading conditions were considered for fatigue endurance evaluation. Horizontal loading(+1200 N) condition was found to be the most severe to the frame. The maximum von Mises stress of the frame under horizontal loading(+1200 N) condition was determined 294 MPa through FEM analysis of the frame. Conclusively, on the basis of fatigue strength of 200 MPa at the number of cycles of 50,000, the MTB frame has an improper safety factor of approximately 0.25, suggesting that this frame needs reinforcement.

• 운동영양학회지
• /
• 제23권1호
• /
• pp.36-47
• /
• 2019

[Purpose] We conducted a meta-analysis to evaluate the effects of Taekwondo training on the physical fitness factors in Korean elementary students comprehensively and quantitatively. [Methods] We classified research studies published until November 2018 according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines and selected a total of 17 research items; a meta-analysis of these items was then conducted. We used the Comprehensive Meta-Analysis 3.0 and Review Manager 5.3 to analyze the mean effect size, study quality, and publication bias. [Results] Taekwondo training improved the cardiopulmonary endurance, muscle endurance, and power of the elementary students, but was not practical or less useful on other physical fitness factors. The meta-regression analysis of the cardiopulmonary endurance and power items showed that the effect size was large when the sample size was small. Therefore, it is necessary to consider the sample size in interpreting the effect size for these two items. Further, during correction of the publication bias for the power items, the improvement effect by Taekwondo training was eliminated. [Conclusion] Taekwondo training is helpful for improving the cardiopulmonary endurance and muscle endurance of Korean elementary students but is not useful for other physical fitness factors.

• Physical Therapy Rehabilitation Science
• /
• 제12권3호
• /
• pp.278-292
• /
• 2023

Objective: This study was performed to investigate the effects of thoracic joint mobilization and breathing exercises on diaphragmatic thickness, chest expansion, respiratory function, and endurance in patients with chronic stroke. Design: Randomized controlled trial Methods: The study included 24 chronic stroke patients who were randomly divided into two groups. The experimental group (12 people) performed 15 minutes of thoracic joint mobility exercises and 15 minutes of breathing exercises, three times a week for 6 weeks, 30 minutes each time. The control group (12 people) received 15 minutes of conservative physical therapy and 15 minutes of breathing exercises, 3 times a week for 6 weeks, 30 minutes per session, the same as the experimental group. The experimental and control groups performed the same breathing exercises. To assess training effectiveness, changes in diaphragm thickness, chest expansion, respiratory function, and endurance were measured. Results: As a result, the experimental group exhibited significant improvements in diaphragm thickness, chest expansion, and respiratory function. The endurance mode also displayed significant enhancement (p<0.05), a finding consistent with the control group. However, the experimental group displayed more substantial improvements in non-affected diaphragm thickness and thoracic expansion compared to the control group (p<0.05). Conclusions: Drawing from these findings, breathing exercise which combine thoracic mobilization, will be actively utilized in addition to physical therapy interventions in clinical trials as an effective intervention method.

• 항공우주시스템공학회지
• /
• 제1권3호
• /
• pp.13-20
• /
• 2007

The objective of this study is to investigate endurance test of localization part for T-50 aircraft engine. Major localization parts of the engine (F404-STW-102) was performed using Accelerated Simulated Mission Engine Test. The purpose of this test is to evaluate of quality demonstration capability, to verify design of engine localization parts, and to improvement safety and operation rate of T-50 advanced trainer by finding out operational problems in production phase and fixing it.

• 한국인쇄학회지
• /
• 제20권1호
• /
• pp.54-64
• /
• 2002

For the efficient work of map printing and quality improvement, we experimented on abrasion-resistance and beam-endurance of 5 kinds of map papers (offset paper, art paper, domestic map paper, foreign map paper, and Tyvek paper). The results obtained that imported and domestic map paper were superior to the others in endurance-proof.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.131-138
• /
• 2001

This paper describes the result of endurance test of the brake system of the Korean EMU on the Sangju test track. The purpose of the test is to prove the endurance of brake system. Test conditions are more severe than actual operation on the commercial line. As of October, test result is good without severe problems. 100,000km of test operation will be continued by the end of this year to check the endurance of the brake system.

• 한국인쇄학회지
• /
• 제30권3호
• /
• pp.57-64
• /
• 2012

When papers each made with sea-algae pulp 1%, 5% and soft, hard wood pulp were aged for 12days. Paper made with soft wood pulp is 30% loss of folding endurance, made with hard wood pulp is 50% loss of folding endurance. On the other, papers each made with 9% sea-algae pulp and soft, hard wood pulp were 18% loss of folding endurance. In the aging test of paper made with different freeness paper made with 300ml CSF, is more effective than 400ml CSF, 500ml CSF.

• ETRI Journal
• /
• 제35권1호
• /
• pp.166-169
• /
• 2013

In this letter, we propose a data randomization scheme for endurance and interference mitigation of deeply-scaled multilevel flash memory. We address the relationships between data patterns and the raw bit error rate. An on-chip pseudorandom generator composed of an address-based seed location decoder is developed and evaluated with respect to uniformity. Experiments performed with 2x-nm and 4x-nm NAND flash memory devices illustrate the effectiveness of our scheme. The results show that the error rate is reduced up to 86% compared to that of a conventional cycling scheme. Accordingly, the endurance phenomenon can be mitigated through analysis of interference that causes tech shrinkage.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.125-133
• /
• 2002

In this study, it was investigated about endurance limit and fatigue behavior of load carrying fillet welded cruciform joints according to welding methods of SMAW, SAW, MIG and FCAW commonly using for welding structures in present. Endurance limit carried omit highly in the order of SMAW, MIG, SAW, FCAW and fatigue crack propagation ratio carried out lowly in the order of SMAW, MIG, FCAW, SAW. By these results, it is needed to use SMAW or MIG welding methods for welding structures with small welding capacity and SAW or FCAW methods for large welding structures after due consideration about economic gains and operation efficiency of welding. Fatigue crack propagation ratio is more effected by strength of welding materials than endurance limit of welding materials according to welding methods.

• Journal of Biosystems Engineering
• /
• 제24권6호
• /
• pp.473-478
• /
• 1999

Recently, it is necessary fir surface materials to be low cost and to keep well endurable and wear in machinery field. Since most good materials with endurance and wear are expensive, they are being studied hard to modify to surface materials with endurance and wear, which overlay with the surface membrane completely. One of them is PTA(Plasma Transferred Arc Overlaying Process) method, which gets into the spotlight. It is thought to be an optimum method, since this method of overlays properly materials with about 3∼5cm surface membrane. It is necessity for the modified materials with endurance and wear to improve within the agricultural environment. Therefore, this research was used the PTA method to endure and wear a material. This method proved to be a reliable method for overlaying the membrane on the materials of an economical agricultural machinery.