Browse > Article
http://dx.doi.org/10.14346/JKOSOS.2013.28.3.001

Evaluation of Fatigue Endurance for an MTB Frame  

Kim, Taek Young (Graduate School, Seoul National University of Science and Technology)
Lee, Man Suk (Graduate School, Seoul National University of Science and Technology)
Lim, Woong (Department of Automotive Engineering, Seoul National University of Science and Technology)
Kim, Ho Kyung (Department of Automotive Engineering, Seoul National University of Science and Technology)
Publication Information
Journal of the Korean Society of Safety / v.28, no.3, 2013 , pp. 1-5 More about this Journal
Abstract
In order to evaluate fatigue endurance for an MTB(mountain bike) frame, FEM(finite element method) analysis was performed. For evaluating the fatigue endurance of the MTB frame, the S-N data for Al-6061 fillet weldment were compared with the stress analysis results through FEM analysis of the frame. Three loading condition, pedalling, horizontal and vertical loading conditions were considered for fatigue endurance evaluation. Horizontal loading(+1200 N) condition was found to be the most severe to the frame. The maximum von Mises stress of the frame under horizontal loading(+1200 N) condition was determined 294 MPa through FEM analysis of the frame. Conclusively, on the basis of fatigue strength of 200 MPa at the number of cycles of 50,000, the MTB frame has an improper safety factor of approximately 0.25, suggesting that this frame needs reinforcement.
Keywords
MTB frame; fatigue endurance evaluation; FEM analysis; safety factor;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Pro/ENGINEERING, Advanced Tutorial (Release 20/2000i), Connect Press, Ltd.
2 Altair Hyper Mesh Basic Training, Vol. 1, Altair Eng.
3 KS R 8046 Mountain bike
4 S. J. Maddox, "Review of Fatigue Assessment Procedures for Welded Aluminium Structures", Int. J. Fatigue, Vol. 25, pp. 1359-1378, 2003.   DOI   ScienceOn
5 J. G. Kaufman, "Properties of Aluminum Alloys", The Aluminum Association, Inc. pp. 162-170, 1999
6 R. R. Ambriz, D. Chicot, N. Benseddiq, G. Mesmacque and S. D. de la Torre, "Local Mechanical Properties of the 6061-T6 Aluminium Weld Using Micro-traction and Instrumented Indentation", European J. Mech. A/Solids, Vol. 30, pp. 307-315, 2011.   DOI   ScienceOn