• Title/Summary/Keyword: End-to-end

Search Result 25,189, Processing Time 0.052 seconds

An Impact Analysis of Window Mechanism and End to End Delay of Tandem Queueing Network with Constant Service Times (상수 서비스 시간을 갖는 개방형 대기행렬의 종대종 지연과 윈도우 구조의 영향 분석)

  • Rhee Young
    • Journal of the Korean Operations Research and Management Science Society
    • /
    • v.29 no.3
    • /
    • pp.99-109
    • /
    • 2004
  • In this paper, we investigate the impact of window mechanisms on end to end delay in a series of nodes with constant service times. It is shown that arbitrary combinations of window mechanisms, each applying to an arbitrary subset of data, can be embedded on the nodes without affecting the departure instants from the system if the windows are at least as large as the number of nodes spanned. The window mechanisms are shown to have no impact on the average end to end delay of data. As the condition on the windows is a minimal necessary requirement for full parallelism, the results show that the transparent operation from viewpoint of data transmission can be achieved with minimal resources.

Clinical Analysis of Cases of Laryngotracheal Reconstruction Treated with End to End Anastomasis (단단문합술에 의한 기관재건의 임상적 고찰)

  • 김광현;윤자복;안순현
    • Korean Journal of Bronchoesophagology
    • /
    • v.1 no.1
    • /
    • pp.101-108
    • /
    • 1995
  • From 1988 to 1995, 59 patients with laryngotracheal stenosis were operated with resection of stenotic segment and end to end anastomosis in Seoul national university. Among these patients, 36 were tracheal stenosis, 17 were combined lesion of subglottis and trachea and 5 were subglottic stenosis. The success of procedure was determined by stoma closure or decannulation and an overall 89.8% success rate was achieved following 165 procedures. The success rate showed correlation with severity of stenosis and the number of procedures done was related to the site of stenosis. There was no mortality and granulation formation, unilateral vocal cord palsy were the common complication of end to end procedures.

  • PDF

Attitude to Death, Perception and Educational Training Needs on the End-of-Life Care on Caregiver (요양보호사의 죽음에 대한 태도, 임종간호 인지 및 교육요구도)

  • Jung, Eunyoung;Seo, Jihye;Kong, Jeonghyeon
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.5 no.4
    • /
    • pp.57-66
    • /
    • 2017
  • Purpose : The current study objective was to determine the attitudes of nursing students to death, perception of end-of life care, and perceptions of educational training needs in relation to the provision of end-of life care, and to apply the results to the development of an efficient and effective education program in this regard. Method : Data collection was carried out between March and April 2017, and was achieved through the administration of a questionnaire to 124 caregivers working in a nursing home in C. A self-report instrument was used to measure nursing attitudes to death, perceptions of end-of-life care, and perceptions of educational training needs in relation to the provision of end-of-life care. The collected data were analyzed using SPSS(R) Statistics for Windows(R)(version 21.0), and were calculated was whole numbers, percentages, $mean{\pm}standard$ deviation, and Pearson's correlation coefficient. Results : The average scores obtained were 2.85 out of a maximum of 4.00, 2.14 out of 4.00, and 2.42 out of 4.00, for attitudes to death, perceptions of end-of-life, and perceptions of educational training needs in relation to the provision of end-of-life care, respectively. A positive correlation was found between attitudes to death and perceptions of end-of-life care, and a negative correlation was found between perceptions of end-of-life care and educational training needs in relation to the provision of end-of-life care. Conclusion : The development and implementation of an educational program is necessary to ensure positive attitudes to death in nursing students and improve their perceptions about end-of-life care. Further research is also warranted to determine the impact of such a program in this regard.

Development of a Dialogue System Model for Korean Restaurant Reservation with End-to-End Learning Method Combining Domain Specific Knowledge (도메인 특정 지식을 결합한 End-to-End Learning 방식의 한국어 식당 예약 대화 시스템 모델 개발)

  • Lee, Dong-Yub;Kim, Gyeong-Min;Lim, Heui-Seok
    • Annual Conference on Human and Language Technology
    • /
    • 2017.10a
    • /
    • pp.111-115
    • /
    • 2017
  • 목적 지향적 대화 시스템(Goal-oriented dialogue system) 은 텍스트나 음성을 통해 특정한 목적을 수행 할 수 있는 시스템이다. 최근 RNN(recurrent neural networks)을 기반으로 대화 데이터를 end-to-end learning 방식으로 학습하여 대화 시스템을 구축하는데에 활용한 연구가 있다. End-to-end 방식의 학습은 도메인에 대한 지식 없이 학습 데이터 자체만으로 대화 시스템 구축을 위한 학습이 가능하다는 장점이 있지만 도메인 지식을 학습하기 위해서는 많은 양의 데이터가 필요하다는 단점이 존재한다. 이에 본 논문에서는 도메인 특정 지식을 결합하여 end-to-end learning 방식의 학습이 가능한 Hybrid Code Network 구조를 기반으로 한국어로 구성된 식당 예약에 관련한 대화 데이터셋을 이용하여 식당 예약을 목적으로하는 대화 시스템을 구축하는 방법을 제안한다. 실험 결과 본 시스템은 응답 별 정확도 95%와 대화 별 정확도 63%의 성능을 나타냈다.

  • PDF

Designing Distributed Real-Time Systems with Decomposition of End-to-End Timing Donstraints (양극단 지연시간의 분할을 이용한 분산 실시간 시스템의 설계)

  • Hong, Seong-Soo
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.3 no.5
    • /
    • pp.542-554
    • /
    • 1997
  • In this paper, we present a resource conscious approach to designing distributed real-time systems as an extension of our original approach [8][9] which was limited to single processor systems. Starting from a given task graph and a set of end-to-end constraints, we automatically generate task attributes (e.g., periods and deadlines) such that (i) the task set is schedulable, and (ii) the end-to-end timing constraints are satisfied. The method works by first transforming the end-to-end timing constraints into a set of intermediate constraints on task attributes, and then solving the intermediate constraints. The complexity of constraint solving is tackled by reducing the problem into relatively tractable parts, and then solving each sub-problem using heuristics to enhance schedulability. In this paper, we build on our single processor solution and show how it can be extended for distributed systems. The extension to distributed systems reveals many interesting sub-problems, solutions to which are presented in this paper. The main challenges arise from end-to-end propagation delay constraints, and therefore this paper focuses on our solutions for such constraints. We begin with extending our communication scheme to provide tight delay bounds across a network, while hiding the low-level details of network communication. We also develop an algorithm to decompose end-to-end bounds into local bounds on each processor of making extensive use of relative load on each processor. This results in significant decoupling of constraints on each processor, without losing its capability to find a schedulable solution. Finally, we show, how each of these parts fit into our overall methodology, using our previous results for single processor systems.

  • PDF

Distributed Routing Based on Minimum End-to-End Delay for OFDMA Backhaul Mobile Mesh Networks

  • Chung, Jong-Moon;Lee, Daeyoung;Park, Jong-Hong;Lim, Kwangjae;Kim, HyunJae;Kwon, Dong-Seung
    • ETRI Journal
    • /
    • v.35 no.3
    • /
    • pp.406-413
    • /
    • 2013
  • In this paper, an orthogonal frequency division multiple access (OFDMA)-based minimum end-to-end delay (MED) distributed routing scheme for mobile backhaul wireless mesh networks is proposed. The proposed scheme selects routing paths based on OFDMA subcarrier synchronization control, subcarrier availability, and delay. In the proposed scheme, OFDMA is used to transmit frames between mesh routers using type-I hybrid automatic repeat request over multipath Rayleigh fading channels. Compared with other distributed routing algorithms, such as most forward within radius R, farthest neighbor routing, nearest neighbor routing, and nearest with forwarding progress, simulation results show that the proposed MED routing can reduce end-to-end delay and support highly reliable routing using only local information of neighbor nodes.

Dynamic and Static End-milling Force Analysis According to Workpiece Geometry (가공물 형상에 따른 동적 및 정적 절삭력 성분 분석법)

  • Yang, Jae-Yong;Yoon, Moon-Chul;Kim, Byung-Tak
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.11 no.4
    • /
    • pp.13-19
    • /
    • 2012
  • There are many dynamic properties in measured end-milling force. So, it is difficult to predict the real static property of end-milling force. Also the behavior of end-milling force is very complex to predict with the measured one. To extract the static property from measured force, it must be filtered and its problem is closely related to a de-noising one. Also this paper presents alternative de-noising method of end-milling force using wavelet filter bank, based on the wavelet transform and its inverse one. In this paper, by comparing the measured force and its wavelet filtered one, the fundamental end-milling force property after wavelet transform is well reviewed and analyzed. This result of wavelet filtering with filter bank shows the static force of end-milling which has severe dynamic properties occurring in entry and exit state of edge emersion into the workpiece.

Vibration Analysis of the End-winding of Large Generator for Fossil Power Plant under Electromagnetic Excitation (대형 화력 발전용 발전기 권선단부의 전자기력에 의한 진동 해석)

  • 김철홍;주영호
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2003.11a
    • /
    • pp.350-355
    • /
    • 2003
  • This paper presents results of vibration analysis of a end-winding of large generator for fossil power plant. A finite element analysis using a commercial S/W is performed to calculate alternating electromagnetic forces, mainly of 120㎐ in 60㎐ machines, acting on the end-winding, and then to calculate forced response of the end-winding under electromagnetic forces. Also, this paper presents analytical and experimental modal analysis results of generator end-winding to validate FE model. We calculated forced response of end-winding on 120㎐, double rotating frequency. These results will be used to evaluate structural reliability of end-winding and applied to update model.

  • PDF

AI-based language tutoring systems with end-to-end automatic speech recognition and proficiency evaluation

  • Byung Ok Kang;Hyung-Bae Jeon;Yun Kyung Lee
    • ETRI Journal
    • /
    • v.46 no.1
    • /
    • pp.48-58
    • /
    • 2024
  • This paper presents the development of language tutoring systems for nonnative speakers by leveraging advanced end-to-end automatic speech recognition (ASR) and proficiency evaluation. Given the frequent errors in non-native speech, high-performance spontaneous speech recognition must be applied. Our systems accurately evaluate pronunciation and speaking fluency and provide feedback on errors by relying on precise transcriptions. End-to-end ASR is implemented and enhanced by using diverse non-native speaker speech data for model training. For performance enhancement, we combine semisupervised and transfer learning techniques using labeled and unlabeled speech data. Automatic proficiency evaluation is performed by a model trained to maximize the statistical correlation between the fluency score manually determined by a human expert and a calculated fluency score. We developed an English tutoring system for Korean elementary students called EBS AI Peng-Talk and a Korean tutoring system for foreigners called KSI Korean AI Tutor. Both systems were deployed by South Korean government agencies.

Framework supporting End-to-End Quality of Service (End-to-End Quality of Service 제공을 위한 Framework)

  • 곽재원;박상래;정순기;이병호
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2001.10c
    • /
    • pp.754-756
    • /
    • 2001
  • 현재 인터넷 사용자의 증가와 더불어 사용자들이 원하는 서비스가 다양해짐에 따라 기존의 Best effort 서비스로는 사용자들이 요구하는 응용 서비스들을 제대로 지원할 수가 없게되었고, 이에 IETF(Internet Engineering Task Force)애서는 사용들의 QoS 제공을 위해 Integrated service model과 Differential service model이 제안되었다. 그러나 소규모 망에서 적용 가능한 Intserv와 대규모 망에서 사용적절한 Diffserv망의 service 방식이 다르기 때문에 End-to-End간에 QoS 제공을 위해서는 이에 대한 망의 연동이 필요하다. 본 논문에서는 두 망간의 연동을 위한 Framework을 제안하였다.

  • PDF