• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.16-29
• /
• 1991

The occurrence of thrombotic occlusion & endothelial injuries at the site of anastomosis have been considered as major problems in microvascular surgery. The purpose of this study was to ascertain whether a end-in-end(sleeve, telescope) anastomosis compared favorably with end-to-end anastomosis in healing procedures on the endothelium and to study the possibility of clinical application in end-in-end method. The microvascular anastomoses have been performed with end-in-end method in the femoral arteries of 20 rats group, also with end-to-end method on the same arteries of another 20 rats group, and then the four anastomosed vessels in subdivided groups on each group were taken after period of 1, 3, 7, 14, 21 days following by anastomoses for scanning electron microscope observation. The results were as following: 1. The patency rate was 90% in the end-in-end group and 85%in the end-to-end group and late thrombus occurred at 7, 14 days on both groups, which suggested -consistent monitoring of patency was required for two weeks at least. 2. Platelet aggregates at the site of anastomosis began to organize on post-operation 3 days and in the end-in-end group, the initially decreased lumen of inserted vessel was gradually increasing on 7 days due to atrophy of the medial layers. 3. Re-endothelialization was completed between 7 and 14 days in end-in-end group, whereas between 14 and 21 days in end-to-end group.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.6
• /
• pp.1-9
• /
• 2002

This study describes the geometric characteristics and the 5-axis machining method in order to make end mill cutter coming with insert tips. End mill geometry is consisted of flute part and insert tip part. Flute part modeled by using ruled surfaces with constant helix angle, and insert tip part modeled by rectangular planes containing tapped hole of specified direction in its center. In this study, the modeled insert tip part considered both of a radial rake angle and a axial rake angle, because they were important cutting conditions. In order to machining the virtual end mill defined from geometric characteristics, we programmed a special software to machining the end mill considered in this study. This software can generate NC-codes about following processes, end milling or ball end milling of flute part end milling of rectangular plane, centering of hole, drilling of hole, and tapping of hole. Ant sampled end mills were modeled and machined on 5-axis CNC machining center with two index tables. Since machined end mills were very agreeable to designed end mills, we saw that the method proposed in this study can be very useful for manufacturing of end mill body with insert tip.

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.33-39
• /
• 2009

The need for end-to-end security has been increased with the widespread use of mobile devices in wireless internet access applications such as mobile commerce. The WAP1.x has an end-to-end security problem that the message transmitted between the mobile device and the Web server is decrypted inside the gateway within a short time. To overcome this problem, several protocols including WAP2.0 has been proposed. These protocols require that the heavy modules such as TLS or data compression modules should be installed on the mobile device with limited resources. This paper proposes a new WTLSW(WTLS-TLS at Web server) protocol and a new WAP2.0 proxy model in order to ensure end-to-end security between the mobile device and the Web server and to be appropriate for mobile devices with limited resources.

• Convergence Security Journal
• /
• v.7 no.2
• /
• pp.65-71
• /
• 2007

Recently, security softwares are the program that is to protect the users from hackers in using electronic financial services. However heackers commit financial crimes to extort asserts using known hacking skills. In our paper, we analyse vulnerability that can be used to hook financial information in user application area and explain end-to-end encryption which is able to be provided by interacting keyboard security program and PKI application program.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.79-85
• /
• 1990

Traditional complex joints have used to a wide variety of wooden furniture construction. Dowel joint is the most popular joint s. However design of this joint to meet specified service condition has been hampered by a lack of proven design formulas which can be use to predict their strength. The object of this study is to investigate the withdrawal strength and effect of dowel diameters in wood and wood based materials. The obtained results were as follows; 1. The relationship between withdrawal strength and dowel diameter is found to be linear. 2. Withdrawal strength of medium density fiberboard and Sepetir in end-to-side joints is superior to Antiaris, particleboard and plywood. 3. In end-to-end joints, withdrawal strength of medium density fiberboard is the most superior joint. but Sepetir. Antiaris and plywood have similarly strength and particleboard is inferiority. 4. Withdrawal strength in end-to-end joints of Antiaris and plywood is higher than in end-ta-side joints. But in end-to-end joints of Sepetir. medium density fiberboard and particleboard is similarity in end-to-side joints.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.465-467
• /
• 2010

This paper proposes MIMO two-way cooperative relay scheme to optimize the end to end capacity in wireless multi-hop mesh network. The basic idea is to perform data transmission via multi-hop relay nodes, in equidistant topology, this method is quite efficient. However, on one hand this topology is very rare in practical situation, on the other hand, in real practical situation where the topology is most likely non equidistant, the end to end capacity significantly degrades due to bottleneck link caused by uneven SNR. Moreover, the end to end capacity degrades at high SNR due to overreach interference from far nodes existing in multi-hop relay networks. In this paper, MIMO two-way cooperative relay in the region of non equidistant nodes is found efficient to improve the end to end capacity. The proposed scheme is validated using numerical simulation.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.248-255
• /
• 2011

An investigation has been carried out, by computer simulation, to evaluate the impact of dispersion compensation configurations on 960 Gbps wavelength division multiplexed (WDM) system with optical phase conjugator (OPC). The considered dispersion compensation configurations in this research are conventional one-end type and bi-end type. One-end and bi-end type are made by using one dispersion compensating fiber (DCF) and two DCFs to decrease dispersion accumulated in one single mode fiber (SMF) span, respectively. It is found that bi-end compensation configuration offers the equal performance with that of one-end configuration in WDM system with residual dispersion per span (RDPS) of 400 ps/nm if net residual dispersion (NRD) had to be optimized in each cases.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1381-1388
• /
• 2005

The purpose of this study was to identify features of masstiege high-end products by comparing to original old high-end products. For this purpose, the differences in values between each consumer groups divided by preferred products types (high-end products, original old high-end products) were examined. This study was executed by consumer survey and 279 female data were used in analysis. The results are as follows. First, the value factors pursued on high-end products were constructed by factor analysis and the factors consisted of 4 elements; conspicuous, aesthetic, durable, conformity. Next, the differences in value elements between masstiege high-end products and original old high-end products were identified by t-test. The consumers preferring original old high-end products pursued conspicuous features significantly more and the consumers preferring masstiege high-end products considered aspects of aesthetic and conformity elements as more important. And according to kinds of preferring high-end product, demographic characteristics were different. The consumers who were of high age, high education and high income and married consumers preferred original old high-end products, whereas the consumers who were of low age, low education and low income and unmarried consumers preferred masstiege high-end products. Finally, marketing strategies for masstiege brand were suggested on the base of the results.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2012

The End Coupling is main component of the aluminum hot roll process. The End Coupling is used for transmission of rotational power with heavy-duty load. Fracture of the End Coupling cause serious economic losses because an End Coupling is a very expensive component and it takes a long time to repair it. Therefore, preventing the destruction of the End Coupling is essential for ensuring a long mechanical life cycle. In this paper, the parametric study on the End Coupling was performed in order to minimize maximum stress under operation loads. To verify the interference of spindle assembly with modified End Coupling, kinematics simulation was performed by applying the various combination type and dynamic boundary condition of the spindle assembly. The interference of optimized model was not occurred during combination process and driving process. As a result of an optimum design for life extension on End Coupling, the maximum stress of modified End Coupling was lower than that of the initial model by 26%.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.580-588
• /
• 2016

Energy efficiency is the main objective in the design of a wireless sensor network (WSN). In many applications, sensing data must be transmitted from sources to a sink in a timely manner. This paper describes an investigation of the trade-off between two objectives in WSN design: minimizing energy consumption and minimizing end-to-end delay. We first propose a new distributed clustering approach to determining the best clusterhead for each cluster by considering both energy consumption and end-to-end delay requirements. Next, we propose a new energy-cost function and a new end-to-end delay function for use in an inter-cluster routing algorithm. We present a multi-hop routing algorithm for use in disseminating sensing data from clusterheads to a sink at the minimum energy cost subject to an end-to-end delay constraint. The results of a simulation are consistent with our theoretical analysis results and show that our proposed performs much better than similar protocols in terms of energy consumption and end-to-end delay.