• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.308-314
• /
• 2017

PURPOSE. The purpose of this study was to analyze the retention force changes and wear behaviours of double-crown systems over long-term use. MATERIALS AND METHODS. Ten groups, each consisting of six samples, were evaluated. Specifically, casting gold alloy primary crown - casting gold alloy secondary crown (AA), laser sintering primary crown - laser sintering secondary crown (LL), casting Cr alloy primary crown - casting Cr alloy secondary crown, (CC) zirconia primary crown - electroformed secondary crown (ZA), and CAD/CAM titanium alloy primary crown - CAD/CAM titanium alloy secondary crown (TT) groups were evaluated at cone angles of $4^{\circ}$ and $6^{\circ}$. The samples were subjected to 5,000 insertion-separation cycles in artificial saliva, and the retention forces were measured every 500 cycles. The wear levels were analyzed via SEM at the beginning and end of the 5,000 cycles. RESULTS. In all samples, the retention forces increased when the conus angle decreased. The highest initial and final retention force values were found in the $LL-4^{\circ}$ group (32.89 N-32.65 N), and the lowest retention force values were found in the $ZA6^{\circ}$ group (5.41 N-6.27 N). The ZA groups' samples showed the least change in the retention force, and no wear was observed. In the other groups, wear was observed mostly in the primary crowns. CONCLUSION. More predictable, clinically relevant, and less excursive retention forces can be observed in the ZA groups. The retention force values of the LL groups were statically similar to those of the other groups, except the ZA groups.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.4
• /
• pp.312-320
• /
• 2011

A reconstruction following a resection of malignant oral cavity tumors is one of the most difficult problems in recent oral oncology. For a better understanding of oral and maxillofacial reconstructive procedures, basic and advanced microvascular anastomosis techniques must be learned and memorized. The aim of this article was to clarify and define the microvascular anastomosis methods, such as primary closure after an arteriotomy, end to side anastomosis, end to end anastomosis, and side to side anastomosis with an artery and vein. This review article discusses the basic skills regarding microvascular anastomoses with brief schematic diagrams in the Korean language. This article is expected to be helpful, particularly to young doctors in the course of the Korean national board curriculum periods for oral and maxillofacial surgery.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.2
• /
• pp.121-128
• /
• 2010

The current trends in steel construction involve the use of tapered sections to minimize the use of excess materials to the extent possible, by choosing cross-sections that are as economical as possible abandoning the classical approach of using prismatic members. In addition, snug-tightened connections, especially the end-plate type, have the advantage of fetching less construction costs and shorter assembly times as opposed to fully tightened joints. Although they have many merits, however, snug-tightened bolted end plates are extremely complex in their structural behavior. In this study, an experimental investigation of the snug-tightened flush end-plate connections of tapered beams were conducted. The primary test parameters were the torque for the clamping bolt, the loading pattern, the bolt type and the connection failure type. Using initial stiffness and load-carrying capacity as proposed by Silva et al. and AISC (2003), the moment-rotation curve of a linearly tapered member with a snug-tightened flush end-plate connection was predicted. Moreover, numerical and experimental data for moment-rotation curves were compared.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.148-150
• /
• 1999

This paper deals with characteristic analysis of Permanent Magnet Linear Synchronous Motor(PMLSM). Parameters and characteristic variations are evaluated by using Finite Element Method (FEM) and Equivalent Magnetizing Current Method. PMLSM can be classified into the short primary type PMLSM and the short secondary type PMLSM according to their structural features. Especially, the short secondary type PMLSM is focused on because of good control characteristics. And this paper presents the difference of analysis results between the short primary type PMLSM and short secondary type PMLSM and investigates the end effect of two PMLSM's.

• ETRI Journal
• /
• v.42 no.6
• /
• pp.846-858
• /
• 2020

The non-orthogonal multiple access (NOMA) technique offers throughput improvement to meet the demands of the future generation of wireless communication networks. The objective of this work is to further improve the throughput by including an underlay cognitive radio network with an existing multi-carrier NOMA network, using cooperative communication. The throughput is maximized by optimal resource allocation, namely, power allocation, subcarrier assignment, relay selection, user pairing, and subcarrier pairing. Optimal power allocation to the primary and secondary users is accomplished in a way that target rate constraints of the primary users are not affected. The throughput maximization is a combinatorial optimization problem, and the computational complexity increases as the number of users and/or subcarriers in the network increases. To this end, to reduce the computational complexity, a dynamic network resource allocation algorithm is proposed for combinatorial optimization. The simulation results show that the proposed network improves the throughput.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.17 no.4
• /
• pp.450-459
• /
• 2010

Purpose: The purposes of this study were to identify awareness and attitudes toward advance directives (ADs) among Korean adults and to examine various opinions in the utilization of ADs among young, middle-aged, and older adults. Methods: Data were collected using a structured questionnaire from 384 adults selected by a quota sampling method on the basis of age. Results: The majority of participants preferred that they themselves would be the primary decision maker. Most of them were unaware of the option of ADs but supported the utilization of ADs. Most of the participants preferred detailed descriptions on end-of-life decisions in ADs but wanted to allow some leeway in following it. Significant differences were found among age groups in terms of the preferences regarding the utilization of ADs. Conclusion: It is suggested that nurses make efforts to educate the general public about ADs and facilitate advance care planning, which focuses on the process of communication on end-of-life preferences within the social network of relationships.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.14-17
• /
• 2007

Power system restoration following a massive blackout starts with re-energizing primary restorative transmission systems at first. The comparison of the TLCC(transmission line charging capacity) and the RPC(reactive power capability) of related black-start generator should be considered in this stage because overvoltage can be caused by self-excitation at the generator when the RPC is smaller than the TLCC. The RPC can be decided by two criteria. One is stator end core heating, and the other is steady state stability. RPC in steady state stability area has been found based on a synchronous reactance Xd. This paper presents RPC limit of salient pole machine which is different from that of non-salient pole machine in steady state stability area and shows derivation process about that.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.40-42
• /
• 1999

In this paper, light-weight system of linear induction motor(LIM) for light railway train is presented, and is compared with former type of LIM. For the light-weight system without modification of motor size the material of primary core(silicon steel) is changed with iron-cobalt alloy and the material of primary winding(copper) is changed with aluminium. The characteristics of LIM are analyzed. Specially, the air gap magnetic flux density distribution due to end effect is showed with motor velocity, we will present papers continuously through designing and testing a trial product.

• Journal of Communications and Networks
• /
• v.17 no.4
• /
• pp.362-369
• /
• 2015

This study addresses the effects of channel estimation error and mutual interference between licensed and unlicensed systems on outage performance of reactive relay selection in unlicensed systems over independent non-identical (i.n.i) Rayleigh fading channels and under both the maximum transmit power constraint and primary outage constraint. Toward this end, power allocation for unlicensed users is first recommended to satisfy both constraints and account for channel estimation error and mutual interference. Then, we derive an exact closed-form outage probability representation for unlicensed systems to quickly evaluate this effect in key operation parameters. Various results corroborate the derived expressions and provide useful insights into system performance.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.11
• /
• pp.1056-1059
• /
• 1995

The bulk photopolymerization of methyl methacrylate (MMA) with primary arylsilane (e.g., phenylsilane) and various primary alkylsilanes (e.g., benzylsilane, 3-phenoxyphenyl-1-silabutane, 3-naphthyl-1-silabutane, and 3-chlorophenyl-1-silabutane) was performed to produce poly(MMA)s containing the corresponding silyl moiety as an end group. It was found for the phenylsilane that while the polymerization yields increased and then decreased with a turning point at the molar ratio of MMA:silane=10:1 as the relative silane concentration increases, the polymer molecular weights decreased, and the TGA residue yields and the relative intensities of SiH IR stretching bands increased with increment of molar ratio of silane over MMA. The photopolymerization yield of MMA with the arylsilane was found to be higher than those with the alkylsilanes and without the silanes. Thus, the silanes seemed to significantly influence on the photopolymerization as both chain initiation and chain transfer agents.