• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.133-138
• /
• 2002

The technique of high speed machining is widely studied in machining fields, because the high efficiency and accuracy in machining can be obtained in high speed machining. Unfortunately the development of tool fur high speed machining in not close behind that of machine tool. In this study, 10 types flat endmill is prepared for obtaining data according to tool shape. Especially, we concentrated in helix angle, number of cutting edge and rake angle. Cutting condition is selected for several experiments and measuring cutting farce, tool life, tool wear and chip shape according to cutting length. 3-axis cutting farces are acquired from the tool dynamometer with high natural frequency, as the conventional tool dynamometer (9257B, Kistler) has cannot measure the state of high frequency force. Particularly, we found out that the axial cutting force waveform has a good relation with tool wear features. And flow is interrupted at the beginning of cutting by the decrease of rake angle. By above results. it is suggested the endmill tool with 45$^{\circ}$helix angle, 6 cutting edge and -15$^{\circ}$rake angle is suitable for high speed machining.

• 전자공학회논문지C
• /
• 제36C권12호
• /
• pp.27-35
• /
• 1999

일반적으로 병렬 상관기 (correlator)는 대역확산 시스템의 전체 전력소모 중 많은 부분을 차지하며, 그의 주요 원인은 다수의 누적기에서 발생하는 전력소모에 기인한다. 본 논문에서는 이러한 병렬 상관기에 적합한 저 전력 소모 누적기를 제안한다. 제안된 누적기는 입력되는 데이터 값의 1의 개수를 비트별로 카운트하고 누적 완료 시에만 카운터 값들에 웨이트를 부가하여 가산함으로써 저 전력 동작을 구현한다. 제안된 누적기는 Cadence사의 Verilog-XL로 설계되고, 0.6u의 Standard Cell Library를 사용하여 Synopsys사의 Design Compiler로 로직 합성이 수행되었다. 시스템의 전력 시뮬레이션은 Apic사의 Powermill을 사용하였다. 시뮬레이션 결과, 제안된 누적기의 전력 소모는 기존의 누적기보다 22%까지 감소되었으며, 또한 최대 동작 주파수는 323%까지 향상되었다. 제안된 누적기로 구성된 병렬 상관기의 전력소모는 기존의 누적기를 사용한 병렬 상관기에 비교해서 22% 감소하였고, 기존의 수동병렬 상관기에 비교해서 43% 감소하였다.

• Human Ecology Research
• /
• 제56권4호
• /
• pp.407-416
• /
• 2018

This study investigated the characteristics and changes of Jeongbang-village silk culture Jeollanam-do Province during Japanese Colonial Rule with a focus in on Gokseong-gun & Damyang-gun Jeongbang-village. The results of the study are as follows. First, after Japanese occupation, it changed from a traditional silkworm species, the Joseon Silkworms and the mulberry tree to an improved Japanese species. Japan established a silk spinning mill called Jongyeon Textile factory in Gwangju and Jeongbang Village was formed in poor rural areas. Second, the way of village management consisted of buying a large number of land for mulberry plans and creating mulberry fields as a cheap way to utilize the labor force for women and men in rural areas. Third, since the end of the Japanese colonial era, mulberry fields in Jeongbang villages which the Japanese left, were sold at a cheap price to Koreans. After the Korean War, the Korean government's efforts to modernize the silkworm industry resulted in a continuous plan to increase the number of silkworms. The impact of government policies has also increased the production of silkworms in these areas. However, since the early 1980s, Korean companies have been affected by Japanese economic policies and dumping by China that has resulted in in a sharp decline in their production. In the case of Gokseong-gun and Damyang, the production of silk products was halted and switched to other crops in the early 1990s when the farming industry began to decline.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.397-402
• /
• 2013

In this study, we carried out the each lines of section, using GC (green silicon carbide) whetstone, the SCM415 material which separated by after and before heat treatments process, in 3+2 axis machining centers for integrated grinding after cutting end mill works, the spindle speed 8000 rpm and feed rate 150 mm/min. For the analysis of the centerline average roughness (Ra), we measured by 10 steps stages. Using Finite element analysis, we found the result of the load analysis effect of the assembly parts, when applied the 11 kg's load on both side of the ATC (Automatic tool change) arm. The result is as follows. For the centerline average roughness (Ra) in the non-heat treatment work pieces, are appeared the most favorable in the tenth section are $0.510{\mu}m$, that were shown in the near the straight line section which is the smallest deformation of curve. In addition, the bad surface roughness appears on the path is to long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.74-81
• /
• 2013

The high-speed machining in the manufacturing industry field has been widely applied for parts of vehicles, aircraft, ships, electronics, etc., recently, because the effect of cost savings for shortening processing time and improving productivity is great. The purpose in this study is to investigate the effect of cutting depth on the surface roughness of workpiece with the spindle rotational speed and feed rate of high-speed machines as a parameter to find the optimal depth in the finishing for ball end mill of the aluminum alloy 7075 which is used much in aircraft parts. When the cutting depth for the respective feed rate and spindle rotational speed is varied from 0.1 mm to 0.7 mm at intervals of 0.2 mm in the wet finishing of the aluminum alloy 7075 by the insoluble cutting oils and high-speed machining used in the rough machining of previous study, the surface roughness values and the cutting temperature are measured. In addition, the cutting surface shapes of test specimens are observed by optical microscope and compared with respectively. It is found that the surface roughness values and the temperature generated during machining are increased as the feed rate and cutting depth are raised, but those are decreased as the spindle rotational speed is increased.

• Journal of the Korean Wood Science and Technology
• /
• 제15권2호
• /
• pp.53-66
• /
• 1987

Korean red pine (Pinus densiflora S. et. Z.) and pitch pine(Pinus rigida Mill) $5{\times}10cm$ dimension lumber were dried in a kiln providing a cross-circulation velocity of 5 m/sec at dry-and wet-bulb temperatures of 116 and $71^{\circ}C$, followed by 3 hours at 91 and $85^{\circ}C$. Compared to dimension lumber dried lumber were as follows. 1. To dry to 10 percent moisture content, the high-temperatures schedule of Korean red pine and pitch pine lumber took less than one seventh the time required by the conventional kiln drying schedule. 2. High-temperature drying rate and conventional drying rate to 10 percent moisture content of Korean red pine lumber were 2.75 and 0.35%/hr, and those of pitch pine lumber were 3.38 and 0.46%/hr respectively. 3. Compared to lumber of both species on conventional schedule, moisture gradient of high-temperature lumber was greater. 4. Compared to lumber on conventional schedule, maximum surface checking of high-temperature lumber of both species was severer, and maximum end checking of high-temperature lumber of both species was similar to that of lumber on conventional schedule. 5. Compard to lumber on conventional schedule, Korean red pine lumber dried at high temperature showed more honeycombing, but pitch pine lumber dried at high-temperature showed significantly slighter honeycombing. 6. Compared to lumber on conventional schedule, the high-temperature lumber showed less warping lumber of both species. 7. Collapse and casehardening of Korean red pine and pitch pine lumber on both scheules were slight.

• 한국기계가공학회지
• /
• 제21권3호
• /
• pp.56-62
• /
• 2022

The tank engine clutch flange constitutes a tank on which the engine and transmission of the tank are mounted. The engine clutch flange is fabricated using a difficult-to-cut material that exhibits high strength and hardness. It is difficult to process and requires considerable processing expertise. In addition, the engine clutch flange for the tank requires high machining precision because it is a system in which the connection is detachable. Because it requires high processing precision, the measurement of products equally important as processing. However, productivity is low owing to the significant amount of time required to measure each product using a three-dimensional coordinate measuring machine. Hence, this study is conducted to improve the productivity of the female tank engine clutch flange. Dedicated hobs and jigs are designed and manufactured to convert the existing end-mill cutting processing into hobbing cutting processing. An engine clutch for the tanks is manufactured using the manufactured dedicated hob and jig, and the shortening time is verified by measuring the processing time. In addition, a jig for inspection is designed and manufactured to measure the precision of the product. To verify the inspected product, the product precision is measured using a contact-type three-dimensional coordinate measuring machine and a surface roughness measuring instrument. The study confirmed that the productivity of the engine clutch flange product for tanks can be improved by simplifying the process, reducing the processing time, and simplifying product inspection.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2001년도 추계학술발표논문집
• /
• pp.57-58
• /
• 2001

용수 다소비 산업으로 분류되는 제지공업의 특성 상, 용수사용의 억제 및 용수의 무방류화에 대한 압력이 증가되고 있는 반면, 초지환경은 날로 열악해지고 있는 실정이다. 한 예로써, 용지의 재활용율 및 재사용 비율이 증가함에 따라 원료의 저급화가 심 각한 수준에 이르고 있으며, 이러한 초지환경의 변화는 각질화되고 극도로 미세화된 다량의 미세섬유 발생 및 잡고지로부터 유입되는 점착성 이물질과 무기 충진제의 도입 등을 유발함으로서 제품의 물리적 성질 저하, 탈수부하 증가로 인한 생산성 저하, 약품사용량 증가 등을 초래하여, 결과적으로는 폐수처리장의 부하를 증대시킴과 동시에 청수사용량 및 폐수방류량을 증가시키는 악순환을 되풀이하게 된다. 국내 제지산업이 국제적 경쟁력을 갖추기 위해서는 제품의 증대가 필수적이나, 원료와 설비의존도를 감안할 때, 제품특성과 공정 분을 결정하는 습부공정을 정확히 파악하여 최적 운전조건을 확립하는 것이 가장 경제적이고 용이한 방법일 뿐만 아니라 전체 제지공정의 정정화에도 기여할 수 있을 것으로 판단된다. 일정규모이상의 종이를 생산하는 제지공장은 거의 대부분 컴퓨터로 처리되는 온라인 공정조절 시스템(On-line process control system)을 구비하고 료의 도입에서부터 설비운전 및 제품의 기본적인 품질관리까지 실시간의 자동화되고 안정적인 운전과 관리시스템을 유지하고 있다. 그러나 전체 제지공정 중, 제품 물성과 운전조건의 대부분을 결정하는 습부공정만큼은 아직도 주기적인 분석이 행해지고 있지 않을 뿐만 아니라, 슬러리의 농도나 보류도 정도를 제이하면 분석항목 조차도 변변히 확립되어 있지 않을 실정이다. 이는 다량의 물 속에 존재하게 되는 용전물질(Dissolved solids, DS), 부유물질(Suspended solids, SS), 섬 유(Fibers), 무기 미 세분(Inorganic f fines), 그리고 투입되는 약품간에 발생하는 계면동전현상 및 이러한 현상과 최종 지제 품의 물성간의 상관관계에 대한 이해 정도나 경험 부족에서 기인하는 것으로 생각된다. 1 1983년 미국제지기술연합회(T APpI)의 제지용 첨가제 분과위원회(Papermaking A Additive Committee)에서는 습부공정의 적절한 조절을 위해 어떤 항목들이 필요하며 그 중요도는 어떠한가를 조사하였으며, 그 결과로 전하밀도, 제타전위, 보류도 및 여수 도, 무기 미세분 함량 등이 중요하다고 보고하였다. 그러나 지료의 전기적 특성을 실시 간으로 측정하는 기자재류가 최근에 이르러서야 도입되고 있는 실정이기 때문에 충분 한 현장적용 사례가 보고되지 못하고 있으며, 결과적으로 얻어진 정보와 최종 지제품의 물성 및 초지기 운전조건과의 상관관계를 확립하는 작업결과는 더욱 찾아보기 어렵다. 따라서, 본 연구에서는, 라이너지 제조공장의 습부공정에 투입되는 약품이 지료 의 전기적 성질, 즉 전하밀도와 제타전위에 미치는 영향을 모니터링함으로서 지료의 전기적 성질들과 습부 공정상태와의 상관관계를 살펴보고자 하였다. 본 연구는 다음과 같은 순서로 진행하였다.

• 생물환경조절학회지
• /
• 제12권4호
• /
• pp.173-179
• /
• 2003

본 연구는 오이와 토마토의 플러그 묘 공정육묘시 발생하는 도장 억제를 위한 적생광 처리시기와 광도의 영향을 알아보기 위해 실험을 수행하였다. 일몰 휴, 야간 및 일출 전 적색광 처리시기에 의한 묘의 도장억제는 일몰 후 처리가 오이와 토마토의 초장을 각각 21.3%와 14.2%로 가장 크게 억제하였고, 경경의 굵기도 가장 두꺼웠다. 엽록소함량은 토마토에서만 일몰 후 처리된 플러스묘의 함량이 대조구에 비해 유의적으로 높게 나타났다. 적색광 초리시기에 의한 두 작물의 건물중을 보면, 대조구에 비해 지상부 건물중은 일몰 후와 일출 전 적색광 처리에 의해 유의적인 감소를 보였다. 오이와 토마토 플러그묘의 T/R율은 일몰 후 처리에서 타 처리에 비해 가장 작았으며 조ㅈ직의 충실도는 밀몰 후 처리에서 가장 크게 나타났다. 광도별 처리에 의한 초장은 오이와 토마토 플러그묘 모두에서 광도가 증가함에 따라 초장은 감소하였다. 하배출, 절간장 및 엽면적도 초장과 유사한 경향을 나타내었다. 두 작물 모두 경경과 엽록소함량 및 조직의 충실도는 광도가 증가함에 따라 증가하는 경향을 보였다. 하지만 지상부와 지하부의 건물율은 광도의 증가에 따라 감소하는 경향이 나타났으며, 오이는 2 및 8 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$의 적색광 처리구에서 토마토는 8 ${\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$처리구에서 가장 낮은 T/R율을 나타내었다.

• 생물환경조절학회지
• /
• 제15권1호
• /
• pp.69-77
• /
• 2006

The experiment was conducted to investigate the nutrition absorption pattern in the growth stage and develope the optimal nutrient solution hydroponically grown the cherry tomato 'Koko' in closed substrate culture system with the nutrient solution of National Horticultural Research Station in Japan into 1/2S, 1S, and 2S. When plant was grown in 1/2S, the growth and yield were high and the pH and EC in the root zone were stable. Suitable composition of nutrient solution for cherry tomato was $NO_3-N\;6.8,\;PO_4-P\;2.7,\;K 3.2,\;Ca\;3.6\;and\;Mg\;1.1\;me\;L^{-1}$ in the early growth stage, $NO_3-N\;7.3,\;PO_4-P\;2.2,\;K\;3.7,\;Ca\;3.6;and\;Mg\;1.1\;me\;L^{-1}$ in the late growth stage by calculating a rate of nutrient and water uptake. To estimate the suitability for the nutrient solution in a development of cherry tomato developed by Wongkwang university in Korea (WU), plant was grown in perlite substrate supplied with different solution and strengths(S) by research station for greenhouse vegetable and floriculture in the Netherlands (Proefstation voor tuinbouw onder glas th Mssldwijk; PTG) of 1/2S, 1S, and 2S, respectively. The growth was good at the PTG and WU 2S in the early stage and the PTG of 1S and WU of 1S and 2S in the late stage. The highest yield of cherry tomato obtained in the WU of 2S. pH and EC in root zone of WU of 2S were stable during the early and late growth stage. Therefore when cherry tomato plant was grown in WU of 2S of EC $1.6{\sim}2.0\;dS\;m^{-1}$in the nutrient solution, not only stable growth and yield but also fertilizer reduction can be obtained than that of PTG.