• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.132-139
• /
• 1989

We have designed a real-time Cardiac digital substraction angiography system (C-DSA) and tested the system for the diagnosis of Cardiac patients. The system was developed by interfacing a radiographic angiography system to a computerized motional image analysis system. This new cardiac DSA can perform the real time processing of averaging and subtraction of the 32 image frames to measure the volume changes of the left ventricle after elimination of motional artrifacts, caused by the heart contraction of beats per minute in average. Each frame has a resolution of 512 x 512 pixels and 256 gray levels. Two image data with maximal and minimal volume were moved to the interfaced IBM PC computer system by high speed computer link line for computation of the heart's contraction parameters. First, the boundary of the left ventricule was detected using a dynamic programming of the gray levels, and its volume was computered to determine the parameters, such as the maximal volume of end-diastolic volume (EDV), the minimal volume of end systolic volume (ESV), and ejection fraction (EF).

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.335-348
• /
• 2014

For high-strength steel, it is difficult to be applied to flexible structural member because it have high yield ratio and low basic material's toughness. One of the great problems when using high-strength steel connections is the brittle fracture at the end of the beam member in common with general mild steel connections. In the cases of mild steel connections, it has be developed that special moment frame connection details by reinforcing structural member or improvement of welding access hole. But, it is incomplete at yet about applicability estimation of high-strength steel connections. This study is the initial step research for the applicability estimation of beam-to-column connections being applied to developed high-strength steel, HSA800. And, it studied about structural performance of the high-strength steel connections according to the details of welding access hole through full-scale test and analytical method.

• Molecules and Cells
• /
• v.23 no.2
• /
• pp.228-238
• /
• 2007

Since molecular structure of hnRNP is not available in foreseeable future, it is best to construct a working model for hnRNP structure. A geometric problem, assembly of $700{\pm}20$ nucleotides with 48 proteins, is visualized by a frame work in which all the proteins participate in primary binding, followed by secondary, tertiary and quaternary binding with neighboring proteins without additional import. Thus, 40S hnRNP contains crown-like secondary structure (48 stemloops) and appearance of 6 petal (octamers) rose-like architectures. The proteins are wrapped by RNA. Co-transcriptional folding for RNP fibril of FMR1 gene can produce 2,571 stem-loops with frequency of 1 stem-loop/15.3 nucleotides and 53 40S hnRNP beaded structure. By spliceosome driven reactions, there occurs removal of 16 separate lariated RNPs, joining 17 separate beaded exonic structures and anchoring EJC on each exon junction. Skipping exon 12 has 5'GU, 3'AG and very compact folding pattern with frequency of 1 stem-loop per 12 nucleotides in short exon length (63 nucleotides). 5' end of exon 12 contains SS (Splicing Silencer) element of UAGGU. In exons 10, 15 and 17 where both regular and alternative splice sites exist, SS (hnRNP A1 binding site) is observed at the regular splicing site. End products are mature FMR-1 mRNP, 4 species of Pri-microRNAs derived from introns 7,9,15 and 3'UTR of exon17, respectively. There may also be some other regulatory RNAs containing ALU/Line elements as well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.260-270
• /
• 2014

In this paper, we first analyze the delay performance of Dynamic Space-time Subframe (DSTS)-based frame structure which has been proposed to support the real-time service as well as non real-time service, using Ad hoc Self-Organizing Time Division Multiple Access (ASO-TDMA) MAC protocol, especially when transmitting a MAC SDU with two or more MAC PDUs, in a multi-hop ad-hoc maritime communication network. We propose two key transmission schemes: contiguous DSTS reservation which guarantees the end-to-end delay for the multiple PDUs, and adaptive transmission probability control schemes to maximize the system throughput. Our simulation results show that the proposed schemes outperform the system throughput of the existing transmission schemes, while supporting the real-time requirement.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.139-140
• /
• 2017

This technology employs a method of forming a single-ply PLUS waterproofing sheet layer comprised of applying a single-ply synthetic polymer layer on a vibrating structure (steel frame, RC) or an inclined surface by using a T joint lap-filling coil and an embedded metal coated sheet. The T - joint reinforcing lap-filling coil was used to block the ingress channel of the rainwater by applying the material in the vulnerable area where the three sides of the waterproof sheet overlapped. Conventional waterproofing techniques have a problem in that the waterproof sheet is pierced because the end portion of the waterproof sheet applied to the vertical portion is fixed by a nail, and the sealant applied to the end portion of the sheet cannot easily secure long-term waterproof durability due to the influence of the external environment. Therefore, the developed technology secured the waterproof durability against the vertical part by using the embedded metal sheet. In addition, automatic hot-air fusing is used to improve the quality of waterproof construction and point fixation method using fixed hardware. This is a technology that is not significantly restricted in the high degradation level regions of domestic waterproof construction environments in Korea such as low-temperature environment, wet floor.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.1
• /
• pp.35-43
• /
• 2019

The Optical Wide-field patroL-Network (OWL-Net) is a global optical network for Space Situational Awareness in Korea. The primary operational goal of the OWL-Net is to track Low Earth Orbit (LEO) satellites operated by Korea and to monitor the Geostationary Earth Orbit (GEO) region near the Korean peninsula. To obtain dense measurements on LEO tracking, the chopper system was adopted in the OWL-Net's back-end system. Dozens of angle-only measurements can be obtained for a single shot with the observation mode for LEO tracking. In previous work, the reduction process of the LEO tracking data was presented, along with the mechanical specification of the back-end system of the OWL-Net. In this research, we describe an integrity assessment method of time-position matching and verification of results from real observations of LEO satellites. The change rate of the angle of each streak in the shot was checked to assess the results of the matching process. The time error due to the chopper rotation motion was corrected after re-matching of time and position. The corrected measurements were compared with the simulated observation data, which were taken from the Consolidated Prediction File from the International Laser Ranging Service. The comparison results are presented in the In-track and Cross-track frame.

• Journal of the Korea Computer Graphics Society
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2021

This paper proposes a simple deformation method for editing the trajectory of a walking motion with preserving its style. To this end, our method analyzes the trajectory of the root joint into the graph and deforms it by applying the graph Laplace operator. The trajectory of the root joint is presented as a graph with a vertex defined the position and direction at each time frame on the motion dataThe graph transforms the trajectory into the differential coordinate, and if the constraints are set on the trajectory vertex, the solver iterative approaches to the solution. By modifying the root trajectory, we can continuously vary the walking motion, which reduces the cost of capturing a whole motion that is required. After computes the root trajectory, other joints are copied on the root and post-processed as a final motion. At the end of our paper, we show the application that the character continuously walks in a complex environment while satisfying user constraints.

• Journal of Korea Game Society
• /
• v.12 no.5
• /
• pp.79-88
• /
• 2012

In this paper, we present a real-time hand pose recognition method to provide an intuitive user interface through hand poses or movements without a keyboard and a mouse. For this, the areas of right and left hands are segmented from the depth camera image, and noise removal is performed. Then, the rotation angle and the centroid point of each hand area are calculated. Subsequently, a circle is expanded at regular intervals from a centroid point of the hand to detect joint points and end points of the finger by obtaining the midway points of the hand boundary crossing. Lastly, the matching between the hand information calculated previously and the hand model of previous frame is performed, and the hand model is recognized to update the hand model for the next frame. This method enables users to predict the hidden fingers through the hand model information of the previous frame using temporal coherence in consecutive frames. As a result of the experiment on various hand poses with the hidden fingers using both hands, the accuracy showed over 95% and the performance indicated over 32 fps. The proposed method can be used as a contactless input interface in presentation, advertisement, education, and game applications.

• Journal of Digital Contents Society
• /
• v.10 no.4
• /
• pp.509-520
• /
• 2009

The advancement of network & application technology causes a major change for the use of IT(Information Technology) equipment, including computer and mobile system. In the process from beginning with main frame in the 1960s and 70's, through the server-client paradigm in the 1980s and toward the development of network computer since 90's, computer systems are now evolutioning from isolated physical system to complementary network based virtual system[1][2]. In network based computer system, application and data required for operation are stored at not client as local system, but at server[1]. User can use application & data on a server as if those are on a local client, and a client is now toward a developing thin and network friendly system. In this paper, we discuss possible ways for the efficient implementation of thin-client. For the use of remote application & data as if in local environment, we make use of X protocol. Unlike formal simple Client - Server paradigm, we design a Proxy for middle-tier server for the improvement of QoS and session persistence. X server, Xvfb(X virtual frame buffer) are implemented on thin client and Server, respectively and we applied XSMP(X Session Management Protocol) to our framework for session management. In the end, beyond simple transfer of server display, we suggest thin client framework for the transfter of remote server application over internet.

• Journal of KIISE:Software and Applications
• /
• v.35 no.1
• /
• pp.1-11
• /
• 2008

This paper detected the characteristics of motion vector to support efficient content -based video search of video. Traditionally, the present frame of a video was divided into blocks of equal size and BMA (block matching algorithm) was used, which predicts the motion of each block in the reference frame on the time axis. However, BMA has several restrictions and vectors obtained by BMA are sometimes different from actual motions. To solve this problem, the foil search method was applied but this method is disadvantageous in that it has to make a large volume of calculation. Thus, as an alternative, the present study extracted the Spatio-Temporal characteristics of Motion Vector Spatio-Temporal Correlations (MVSTC). As a result, we could predict motion vectors more accurately using the motion vectors of neighboring blocks. However, because there are multiple reference block vectors, such additional information should be sent to the receiving end. Thus, we need to consider how to predict the motion characteristics of each block and how to define the appropriate scope of search. Based on the proposed algorithm, we examined motion prediction techniques for motion compensation and presented results of applying the techniques.