• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.3
• /
• pp.360-372
• /
• 1998

This study deals with the interaction between buoyancy-induced convection and externally imposed excitation in the form of harmonic rocking and the effect of the interaction upon heat transfer in low-Pr liquids. A wide array of system responses are discussed using the spectral collocation numerical technique. The superposition of buoyancy and Coriolis forces leads to complex fluid flow and heat transfer. The transition to chaotic convection is accelerated, and heat transfer rates are reduced as the enclosure is excited at the fundamental frequency of oscillation associated with the pure buoyancy-driven case. Average heat transfer rates are correlated for Pr=0.02 and 0.03. The heat transfer is affected more in the Pr=0.03 liquid than the case of Pr=0.02.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.6
• /
• pp.653-663
• /
• 2000

A lot of hazardous wastes are discharged as by-products of working process by industrial development. Hazardous wastes is physical characteristics of difficult destruction at hight temperature. Numerical simulation and combustion experiment performed of dump incinerator for hazardous waste incineration. For the numerical simulation, the SIMPLEST algorithm was used to ensure rapid converge A K-$\varepsilon$ model was incorporate for the enclosure of turbulence flow. Combustion model was used by ESCRS (extended simple chemically reacting system) model available of CHEMKIN thermodynamic data for the source term of species conservation equation or energy equation. Radiation model is used by six flux model. A parametric screening studies was carried out through numerical simulation and experiment. Residence time and concentration in the incinerator was strongly dependent on the parameters of mixture velocity, mixture equilibrium ratio, surrogate velocity and surrogate equilibrium ratio.

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1850-1852
• /
• 1997

In this paper, the behavior and effect of conducting particles in a $SF_6$ insulated electrode system, are presented. It is shown that the bouncing voltage of the particle is independent of particle length, and that the breakdown voltages are affected by the particle length. The longer the particle, the lower the breakdown voltages. The bouncing-off, the lift off and breakdown voltages increase as the particle diameter increase. The breakdown voltage of free particle is lower than fixed particle on the enclosure.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.189-192
• /
• 2004

Utilizing pump selection softwares is becoming a new general trend in pump industries, substituting the old fashioned pump catalogs. One of the most powerful pump selection softwares is developed, which features pump performance viscosity correction function as well as pump selection based on the exact pump performance curves, NPSH warning, automatic determination of impeller diameter cutting to meet the customer's performance specification, performance simulation for the rpm and diameter variation, standard motor recommendation according to the motor standards and enclosure types and automatic pump datasheet generation for sales submission, automatic pump drawings and dimension generation for installation check and part preparation. This software provides pump distributors and customers with a quick, easy and exact pump selection, various performance curves review (system curves, performance curve of series or parallel operation) of the selected pumps.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.407-410
• /
• 2002

본 논문은 스피커의 후면 방사음을 이용하여 저주파수의 음을 재생하기 위한 인클로져(enclosure) 방식 중 통기구(Vent)를 이용한 위상반전(Bass Reflex) 방식의 스피커 시스템에 관한 것이다. 일반적으로 위상반전형 스피커 시스템의 임피던스 곡선의 특성은 저주파수 대역에서 통기구의 공명에 대한 것과 구동스피커의 공명에 대한 임피던스 봉(mound)이 나타난다. 기존의 연구 결과들은 통기구와 인플로져의 용적에 관련된 최저 주파수에서의 공명에 대한 것만을 대상으로 하였다. 즉, 최저 주파수에서의 공명특성이 상대적으로 높은 주파수에서 나타나는 스피커의 공명특성에 미치는 영향과 이로 인한 스피커의 음파발생 특성에 관하여 구체적인 논의가 되지 않았다. 본 논문에서는 위상반전형 스피커 시스템에서의 두 임피던스 봉오리 사이의 관계를 정리하고, 상대적으로 높은 주파수에서 발생되는 임피던스의 공명 특성에 따른 스피커의 음파발생 특성에 관해 연구하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2766-2768
• /
• 2003

In this paper, positions of microphones and speakers in adaptive noise control systems are selected using optimization techniques. To get the optimal control characteristics of adaptive noise control system, It is necessary to optimize positions of microphones and speakers. Assume that control speakers are placed in a experimental enclosure several place indoors. Acoustic transfer functions from control speaker positions to microphone positions are measured for simulation program by experiments, and simulated annealing methods are used to select optimal positions of speakers and microphones.

• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.1
• /
• pp.30-38
• /
• 2002

In multi-dimensional systems, various solution schemes for radiative transfer are suggested but the applicabilities and accuracies of these schemes have not yet fully tested due to the lack of reference solutions especially for nongray gases. In this paper we present some precise radiative transfer solutions for a black walled 3-dimensional cylindrical system filled with nongray gases having uniform temperature and concentration. The ray-tracing method with the $T_N$ quadrature set and the SNB model are used to obtain the radiative transfer solutions by the nongray gases. The solutions presented in this paper are proved to be quite accurate and can be regarded as the reference solutions for the radiative transfer by nongray gases.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1735-1742
• /
• 2018

The number of electric railway failures will increase due to the external and internal effects of electric railroads. The grounding test with 25,000V is to artificially test the transmission voltage to ground, and it is possible to cause risks of electric shock and other equipment insulation damage in neighboring enclosure. In 2016, method of fault localization changed to low - voltage at 380V from artificially high- voltage in the grounding tests since opening of Seoul Metropolitan Express Railway; The method is more accurate and safer rather than the previous one because it gets more data from unlimited grounding tests. However, an electric current falls on the track section where the track branches and vehicle bases with many lines. To precisely detect a transitive phenomenon, it is necessary to continuously study and additionally install.

• Journal of information and communication convergence engineering
• /
• v.21 no.3
• /
• pp.233-238
• /
• 2023

This study presents a method for identifying partial discharge defects in an eco-friendly gas insulated system using a backpropagation algorithm. Four partial discharge (PD) electrode systems, namely, a free-moving particle, protrusion on the conductor, protrusion on the enclosure, and voids, were designed to simulate PD defects that can occur during the operation of eco-friendly gas-insulated switchgear. The PD signals were measured using an ultrahigh-frequency sensor as a nonconventional method based on IEC 62478. To identify the types of PD defects, the PD parameters of single PD pulses in the time and frequency domains and the phase-resolved partial discharge patterns were extracted, and a back-propagation algorithm in the artificial neural network was designed using a virtual instrument based on LabVIEW. The backpropagation algorithm proposed in this paper has an accuracy rate of over 90% for identifying the types of PD defects, and the result is expected to be used as a reference database for asset management and maintenance work for eco-friendly gas-insulated power equipment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.433-439
• /
• 2015

Enclosures for CCTV internal short circuit are prevented due to wetting to maintain a constant humidity and temperature, to avoid condensation due to temperature difference, a constant temperature and humidity requirements of the equipment, such as high-temperature resistant and a constant temperature of the structure, degree of energy utilization is optimized for developing this corresponding housing automatic control system and humidity is required. Device being an expensive imaging equipment in side of the enclosure according to the temperature conversion from a hazard protection, there is a need for a constant temperature and humidity control apparatus that can prevent a short-circuit failure. This is a system in which the accessory device is absolutely required for the storage and transmission of an image in recording reliability and field conditions.