• 제목/요약/키워드: Encapsulation efficiency

검색결과 174건 처리시간 0.029초

Improved Antitumor Efficacy of Hyaluronic Acid-Complexed Paclitaxel Nanoemulsions in Treating Non-Small Cell Lung Cancer

  • Kim, Joo-Eun;Park, Young-Joon
    • Biomolecules & Therapeutics
    • /
    • 제25권4호
    • /
    • pp.411-416
    • /
    • 2017
  • Paclitaxel (PTX) is a effectively chemotherapeutic agent which is extensively able to treat the non-small cell lung, pancreatic, breast and other cancers. But it is a practically insoluble drug with water solubility less than $1{\mu}g/mL$, which restricts its therapeutic application. To overcome the problem, hyaluronic acid-complexed paclitaxel nanoemulsions (HPNs) were prepared by ionic complexation of paclitaxel (PTX) nanoemulsions and hyaluronic acid (HA) to specifically target non-small cell lung cancer. HPNs were composed of ${\small{DL}}-{\alpha}$-tocopheryl acetate, soybean oil, polysorbate 80, ferric chloride, and HA and fabricated by high-pressure homogenization. The HPNs were $85.2{\pm}7.55nm$ in diameter and had a zeta potential of $-35.7{\pm}0.25mV$. The encapsulation efficiency was almost 100%, and the PTX content was 3.0 mg/mL. We assessed the in vivo antitumor efficacy of the HPNs by measuring changes in tumor volume and body weight in nude mice transplanted with CD44-overexpressing NCI-H460 xenografts and treated with a bolus dose of saline, $Taxol^{(R)}$, PTX nanoemulsions (PNs), or HPNs at a dose of 25 mg/kg. Suppression of cancer cell growth was higher in the PN- and HPN-treated groups than in the $Taxol^{(R)}$ group. In particular, HPN treatment dramatically inhibited tumor growth, likely because of the specific tumor-targeting affinity of HA for CD44-overexpressed cancer cells. The loss of body weight and organ weight did not vary significantly between the groups. It is suggest that HPNs should be used to effective nanocarrier system for targeting delivery of non-small cell lung cancer overexpressing CD44 and high solubilization of poorly soluble drug.

OLED소자의 수명에 미치는 다층 보호막의 영향 (The Effect of Multilayer Passivation Film on Life Time Characteristics of OLED Device)

  • 주성후;양재웅
    • 한국표면공학회지
    • /
    • 제45권1호
    • /
    • pp.20-24
    • /
    • 2012
  • Multilayer passivation film on OLED with organic/inorganic hybrid structure as to diminish the thermal stress and expansion was researched to protect device from the direct damage of $O_2$ and $H_2O$ and improve life time characteristics. Red OLED doped with 1 vol.% Rubrene in $Alq_3$ was used as a basic device. The films consist of ITO(150 nm)/ELM200_HIL(50 nm)/ELM002_HTL(30 nm)/$Alq_3$: 1 vol.% Rubrene(30 nm)/$Alq_3$(30 nm) and LiF(0.7 nm)/Al(100 nm) which were formed in that order. Using LiF/$SiN_x$ as a buffer layer was determined because it significantly improved life time characteristics without suffering damage in the process of forming passivation film. Multilayer passivation film on buffer layer didn't produce much change in current efficiency, while the half life time at 1,000 $cd/m^2$ of OLED/LiF/$SiN_x$/E1/$SiN_x$ was 710 hours which showed about 1.5 times longer than OLED/LiF/$SiN_x$/E1 with 498 hours. futhermore, OLED/LiF/$SiN_x$/E1/$SiN_x$/E1/$SiN_x$ with 1301 hours showed about twice than OLED/LiF/$SiN_x$/E1/$SiN_x$ which demonstrated that superior characteristics of life time was obtained in multilayer passivation film. Through the above result, it was suggested using LiF/$SiN_x$ as a buffer layer could reduce the damage from the difference of thermal expansion coefficient in OLED with protective films, and epoxy layer in multilayer passivation film could function like a buffer between $SiN_x$ inorganic layers with relatively large thermal stress.

캡슐화-탈수화-유리화에 의한 국화 품종 '화이트 엔디' 신초의 초저온 동결보존 (Cryopreservation of Chrysanthemum morifolium cv. 'White ND' Shoot Tips using Encapsulation-Dehydration-Vitrification Method)

  • 전수민;김창길
    • Current Research on Agriculture and Life Sciences
    • /
    • 제32권2호
    • /
    • pp.99-103
    • /
    • 2014
  • 본 실험은 국화의 바이로이드 제거에 이용되는 초저온처리 시 국화 품종 'White ND'을 적합한 처리조건을 확립하기 위해 초저온처리의 단계별 요인을 실험하였다. 그 결과 생장점의 크기는 1 mm(엽원기 2~3매 포함)에서 높은 생존율과 신초 재생율을 나타내었고, vitirification 처리시 PVS3가 효과적이었으며, 처리 시간은 60분 처리 하였을 때 높은 생존율 및 정 상 신초 재생율을 보였다. 또한 vitrification을 위한 전처리 조건은 sucrose 농도를 88 mM 24시간, sucrose 0.3 M 16시간, sucrose 0.5 M 6시간, sucrose 0.7 M 3시간으로 처리하는 것이 초저온 처리 후 생존율 및 신초 재생율을 높이는데 효과적이었으며, 재생된 정상 식물체는 모본과 비교하여 ploidy level이 동일한 것으로 보아 식물체의 유전적 변이가 일어나지 않았다.

Phase Behavior and Spontaneous Vesicle Formation in Aqueous Solutions of Anionic Ammonium Dodecyl Sulfate and Cationic Octadecyl Trimethyl Ammonium Chloride Surfactants

  • Kang, Kye-Hong;Kim, Hong-Un;Lim, Kyung-Hee
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권4호
    • /
    • pp.667-674
    • /
    • 2007
  • Phase behavior for the mixed aqueous surfactant systems of cationic octadecyl trimethyl ammonium chloride (OTAC)/anionic ammonium dodecyl sulfate (ADS)/water was examined. Below the total surfactant concentrations of 1.5 m molal, mixed micelles were formed. At the total surfactant concentrations higher than 1.5 m molal, there appeared a region where mixed micelles and vesicles coexist. As the surfactant concentration increased, the systems looked very turbid and much more vesicles were observed. The vesicles were spontaneously formed in this system and their existence was observed by negative-staining transmission electron microscopy (TEM), small-angle neutron scattering (SANS) and encapsulation efficiency of dye. The vesicle region was where the molar fraction α of ADS to the total mixed surfactant was from 0.1 to 0.7 and the total surfactant concentration was above 5 × 10-4 molality. The size and structure of the vesicles were determined from the TEM microphotographs and the SANS data. Their diameter ranged from 450 nm to 120μm and decreased with increasing total surfactant concentration. The lamellar thickness also decreased from 15 nm to 5 nm with increasing surfactant concentration and this may be responsible for the decrease in vesicle size with the surfactant concentration. The stability of vesicles was examined by UV spectroscopy and zeta potentiometry. The vesicles displayed long-term stability, as UV absorbance spectra remained unchanged over two months. The zeta potentials of the vesicles were large in magnitude (40-70 mV) and the observed longterm stability of the vesicles may be attributed to such high ζ potentials.

생활폐기물 적환장의 운영에 따른 수거효율성 분석 (Effect of Waste Transfer Stations on Collection Efficiency in Seoul)

  • 유기영
    • 유기물자원화
    • /
    • 제26권1호
    • /
    • pp.13-19
    • /
    • 2018
  • 서울시 25개 자치구는 수거거점 확보, 수거시스템과 처리시스템의 연결, 간이 선별 등을 목적으로 생활폐기물 적환장을 운영하고 있다. 그러나 적환장시스템이 효율적으로 운영 가능한 총운반거리 등 구체적인 적환장 운영조건에 대해 분석한 국내사례는 없다. 본 연구는 적환장 운영 여부, 발생원으로부터 적환장까지의 운반거리, 적환장의 건물형태 등을 변화시키면서 수거비용의 변화를 관찰하였다. 그 결과 적환장이 쓰레기 배출원에 근접할수록, 적환장의 건설비가 저렴할수록 수거비용은 감소하였고, 건물 없는 적환장의 확보가 가능한 지역은 총운반거리가 15 km이상만 되어도 적환장을 운영하는 것이 운영하지 않는 경우보다 유리한 것으로 나타났다. 그러나 지하시설물로 적환장을 확보해야하는 지역에서는 유효한 총운반거리가 35 km이상으로 늘어났다.

Development of Drug-Loaded PLGA Microparticles with Different Release Patterns for Prolonged Drug Delivery

  • Choi, Yeon-Soon;Joo, Jae-Ryang;Hong, Areum;Park, Jong-Sang
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권3호
    • /
    • pp.867-872
    • /
    • 2011
  • For the prolonged delivery and sustained release rates of low molecular weight drugs, poly(lactic-co-glycolic acid) (PLGA) microparticles containing the drug SKL-2020 have been investigated. On increasing polyvinyl alcohol (PVA) concentration (from 0.2% to 5%), the size of microparticles decreased (from $48.02{\mu}m$ to $10.63{\mu}m$) and more uniform size distribution was noticeable due to the powerful emulsifying ability of PVA. A higher drug loading (from 5% to 20%) caused a larger concentration gradient between 2 phases at the polymer precipitation step; this resulted in decreased encapsulation efficiency (from 34.19% to 25.67%) and a greater initial burst (from 61.71% to 70.05%). SKL-2020-loaded PLGA microparticles prepared with different fabrication conditions exhibited unique release patterns of SKL-2020. High PVA concentration and high drug loading led to an initial burst effect by rapid drug diffusion through the polymer matrix. Since PLGA microparticles enabled the slow release of SKL-2020 over 1 week in vitro and in vivo, more convenient and comfortable treatment could be facilitated with less frequent administration. It is feasible to design a release profile by mixing microparticles that were prepared with different fabrication conditions. By this method, the initial burst could be repressed properly and drug release rate could decrease.

N-스테아릴락토비온아미드의 합성과 이를 이용한 리포좀의 제조 (Synthesis of N-Stearyl lactobionamide(N-SLBA) and Preparation of Neo-galactosylated Liposome)

  • 김종국;민미홍;민경희;나운용;이봉진;김양배
    • 약학회지
    • /
    • 제36권2호
    • /
    • pp.159-166
    • /
    • 1992
  • A neoglycolipid, N-stearyl lactobionamide(N-SLBA) was synthesized and the incorporation of the neoglycolipid into liposomes was achieved in order to prepare neo-galactosylated liposome as potential drug carrier for active targeting to galactose receptor existing cell and tissue. N-SLBA was synthesized by the covalent linkage between carboxyl group of lactobionic acid and amino group of stearylamine(SA). The yield of N-SLBA was about 52.3%. It was identified with $1650\;cm^{-1}$ in IR chart, 7.5 ppm in NMR spectra, $61^{\circ}C$ endothermic peak in DSC heating curve. Surface-modified large unilamellar vesicle with galactose(N-SLBA-LUV) could be prepared with N-SLBA by reverse evaporation method. N-SLBA-LUV was identified by TEM and measuring of membrane function. The maximum amount of N-SLBA incorporated into liposome is up to about 15 mol%. Compared with control liposome (SA-LUV), N-SLBA-LUV showed lower encapsulation efficiency of MTX. It might due to the loss of positive surface charge of stearylamine. N-SLBA-LUV was similar to SA-LUV in aspect of osmotic behavior. N-SLBA-LUV prepared with N-SLBA would be expected to be a good carrier for active targeting to galactose receptor existing cell and tissue.

  • PDF

Preparation and In Vitro Release of Ramose Chitosan-Based-5-Fluorouracil Microspheres

  • Li, He-Ping;Li, Hui;Wang, Zhou-Dong;Zhang, Juan-Juan;Deng, Man-Feng;Chen, San-Long
    • 대한화학회지
    • /
    • 제57권1호
    • /
    • pp.88-93
    • /
    • 2013
  • In order to construct a controlled release system of drugs and to reduce toxic side effects of 5-fluorouracil, the novel ramose chitosan-based-5-fluorouracil microspheres (CS-FU-MS) were prepared. Firstly, using chitosan (CS) as carriers and 5-fluorouracil (5-FU) as a model drug, ramose chitosan-based-5-fluorouracil (CS-FU) was efciently synthesized by chemical crosslinking method through microwave irradiation, drug loading was 10.6%; Secondly, CS-FU-MS were prepared by CS-FU self-assembled under the dialysis conditions and the free 5-FU was encapsulated further at the same time. The size dispersivity of particles is uniform, and the average diameter of the CS-FU-MS was $4{\mu}m$. The drug encapsulation efficiency was 76.1%, and the drug loading was increased to 26.22%. CS-FU-MS maintain the zero-order release time in PBS (pH = 7.4) and HCl/KCl (pH = 1.2) dialysis medium was 40h and 34h respectively, and the cumulative release were 58.89% and 79.33% in 182 h. The results showed that CS-FU-MS have excellent sustained release properties.

친수성 고분자가 BCNU 함유 PLGA 웨이퍼로부터 BCNU의 방출에 미치는 효과 (Effect of Hydrophilic Polymers on the Release of BCNU from BCNU-loaded PLGA Wafer)

  • 안태군;강희정;문대식;이진수;성하수
    • 폴리머
    • /
    • 제26권5호
    • /
    • pp.670-679
    • /
    • 2002
  • 1, 3-bis[2-chloroethyl]-1-nitrosourea (BCNU, carmustine)는 악성 뇌종양 치료를 위하여 화학요법적 임상에서 널리 사용되는 약물이다. 또한, poly(D,L-lactide-co-glycolide) (PLGA, 분자량: 20000 g/mole, 락타이드와 글리콜라이드 몰비 75 : 25)는 약물전달시스템을 위한 약물 전달체로써 사용되어지는 잘 알려진 생분해성 초분자이다. 본 연구에서 폴리비닐피롤리돈 (PVP) 또는 폴리에틸렌옥사이드 (PEO)를 함유하고 있는 BCNU 함유 PLGA 웨이퍼들의 BCNU 방출거동과 웨이퍼에 포접된 친수성 고분자의 효과를 조사하였다. 친수성 고분자의 첨가 또는 첨가 없이 BCNU 함유 PLGA 미분말은 분사건조법에 의해 제조하였으며, 제조된 BCNU 함유 PLGA 미분말은 압축성 형법에 의해 웨이퍼형태고 제조하였다. 친수성 고분자가 첨가된 BCNU 함유 PLGA 미분말의 포접율은 85∼97%였고, PLGA에 포접된 BCNU의 결정성은 현저히 감소하였다. 약물 방출 경향과 분해 거동에서 친수성 고분자의 함량이 증가할수록 BCNU의 초기방출량과 방출속도는 증가됨을 확인하였다. 방출시험 기간동안 웨이퍼의 형태변화와 무게변화를 측정함으로써 친수성 고분자의 함량이 증가할수록 PLGA의 수차와 분해가 촉진됨을 관찰하였다.

Design of 8K Broadcasting System based on MMT over Heterogeneous Networks

  • Sohn, Yejin;Cho, Minju;Paik, Jongho
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제11권8호
    • /
    • pp.4077-4091
    • /
    • 2017
  • This paper presents the design of a broadcasting scenario and system for an 8K-resolution content. Due to an 8K content is four times larger than the 4K content in terms of size, many technologies such as content acquisition, video coding, and transmission are required to deal with it. Therefore, high-quality video and audio for 8K (ultra-high definition television) service is not possible to be transmitted only using the current terrestrial broadcasting system. The proposed broadcasting system divides the 8K content into four 4K contents by area, and each area is hierarchically encoded by Scalable High-efficiency Video Coding (SHVC) into three layers: L0, L1, and L2. Every part of the 8K video content divided into areas and hierarchy is independently treated. These parts are transmitted over heterogeneous networks such as digital broadcasting and broadband networks after going through several processes of generating signal messages, encapsulation, and packetization based on MPEG media transport. We propose three methods of generating streams at the sending entity to merge the divided streams into the original content at the receiving entity. First, we design the composition information, which defines the presentation structure for displays. Second, a descriptor for content synchronization is included in the signal message. Finally, we define the rules for generating "packet_id" among the packet header fields and design the transmission scheduler to acquire the divided streams quickly. We implement the 8K broadcasting system by adapting the proposed methods and show that the 8K-resolution contents are stably received and serviced with a low delay.