• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.618-618
• /
• 2003

The purpose of this study was to evaluate the etching effects and bond strength of total etching and self-etching adhesive system on unground enamel using scanning electron microscopy and microtensile bond strength test. The buccal coronal unground enamel from human extracted molars were prepared using low-speed deamond saw. Scotchbond Multi-Purpose(group CM), Clearfil SE Bond(group SE), or Adper Prompt L-pop(group LP) were applied to the prepared teeth, and resin compasite(Z-250) was built up incrementally. Resin tag formation were evaluated by scanning electron microscopy, after removal of enamel surface by acid dissolution and dehydration.(중략)

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.273-280
• /
• 2004

The purpose of this study was to evaluate the etching effects and bond strength of total etching and self-etching adhesive system on unground enamel using scanning electron microscopy and microtensile bond strength test. The buccal coronal unground enamel from human extracted molars were prepared using low-speed diamond saw. Scotchbond Multi-Purpose (group SM). Clearfil SE Bond (group SE), or Adper Prompt L-Pop (group LP) were applied to the prepared teeth. and the blocks of resin composite (Filtek Z250) were built up incrementally. Resin tag formation was evaluated by scanning electron microscopy. after removal of enamel surface by acid dissolution and dehydration. For microtensile bond strength test. resin-bonded teeth were sectioned to give a bonded surface area of $1\textrm{mm}^2$. Microtensile bond strength test was perfomed. The results of this study were as follows. 1. A definite etching pattern was observed in Scotchbond Multi-Purpose group. 2. Self-etching groups were characterized as shallow and irregular etching patterns. 3. The results (mean) of microtensile bond strength were SM: 26.55 MPa, SE: 18.15 MPa, LP: 15.57 MPa. SM had significantly higher microtensile bond strength than 8E and PL (p < 0.05). but there was no significant differance between SE and PL.

• 대한소아치과학회지
• /
• 제32권2호
• /
• pp.321-331
• /
• 2005

치면열구전색제의 접착력에 영향을 줄 수 있는 교합면 열구 법랑질의 미세구조 및 산부식 형태, 그리고 산부식 형태에 영향을 줄 수 있는 prismless enamel의 존재 여부 및 법랑질의 화학적 조성을 규명하고자 소구치를 대상으로 협설면과 근원심으로 각각 절단하여 열구내의 법랑질 표면과 산부식 형태를 주사전자현미경으로 관찰하고 EDX를 사용하여 법랑질의 화학적 조성을 분석한 결과 다음과 같은 결과를 얻었다. 1. 열구내 법랑질은 대부분이 prismless enamel이 존재하였다. 2. 미성숙 영구치와 성숙된 영구치간의 열구내 법랑질 표면 구조 및 산부식 형태는 차이가 없었다. 3. 열구 법랑질은 부위에 관계없이 60초 산부식이 15초, 30초, 45초에 비해 산부식 효과가 가장 컸으며 15초, 30초, 45초의 산부식 시간에서는 적절한 유지력을 얻을 수 있는 산부식 상이 관찰되지 않았다. 4. 열구 법랑질의 표면을 기계적으로 제거한 경우는 30초의 산부식 시간에서도 60초 산부식 시간에 못지않은 전형적인 산부식 상이 관찰되었다. 5. 산부식 형태는 주로 rod 주위가 소실된 제 2형의 산부식 상이 관찰되었다. 6. 열구 내 법랑질의 부위별 화학적 조성의 차이는 없었으나 미성숙 영구치와 성숙된 영구치 사이의 칼슘/인 비는 유의한 차이를 보였다. 이상의 연구결과를 종합하면 교합면 열구 내 법랑질은 대부분 산에 저항성이 큰 prismless enamel로 덮여 있어 기존에 제안된 15-30초의 산부식 시간으로는 적절한 유지력을 얻을 수 있는 산부식 상을 형성할 수 없다는 사실을 알 수 있다. 따라서 기존의 제안된 산부식 시간에 대한 재고가 필요하며 이와 함께 적절한 산부식 상을 얻기 위한 방안으로 산부식 전 bur를 사용하여 열구내 법랑질 표면을 제거해 주는 보조적인 술식에 대한 검토가 필요하리라 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.136-149
• /
• 1996

The effects of various All-Etching Agents (10% phosphoric acid, 10% maleic acid and 10 % citric acid) and 32 % phosphoric acid and varied etching time were evaluated by observing the morphology of the etched enamel surfaces using Scanning electron microscopy and by measuring the shear bond strength of a composite resin to human enamel. A total of 156 extracted premolar and molar teeth free of irregularities were employed in this study. Specimens for the observation of enamel morphology were divided into 12 groups of 3 teeth each, based on the type of etchant used and application time. After exposure to the etching agent specimens were washed air-dried and then glued to aluminum stubs and coated with a layer of gold for examination in the scanning electron microscope. Specimens for the evaluation of bond strength were divided into 12 groups of 10 teeth each also based on the type of etchant used and application time. After exposure to the etching agent the specimens were washed, air-dried and a thin layer of bonding agent was applied using a brush. Z 100 composite resin was light cured to the surface and stored at $37^{\circ}C$, 100% humidity for 7 days. An Instron Universal Testing Machine was used to apply a shearing force at $90^{\circ}$ angle from the enamel surface. It is concluded from this study that commercial All-etching agents can be used with a 15-second etching without adversely affecting retention of dental resin materials. At the same time, the acid concentration is probably a suitable compromise regarding the acid's function as a dentin demineralizing all-etch conditioning agent. The following results were obtained. 1. Specimens etched with 10 % citric acid showed a random superficial etching pattern which could not be related to prism morphology. 2. Specimens etched with 10 % and 32 % phosphoric acid and 10 % maleic acid showed a type I pattern in which core material was preferentially removed leaving the prism peripheries relatively intact or a type II pattern in which prism peripheries were preferentially removed. This delineation became more distinguished as etching time was increased. 3. All-Etching Agents and 32 % phosphoric acid showed a statistically significant higher shear bond strength at 15 seconds etching time.(p<0.05) 4. 10 % maleic acid and 32 % phosphoric acid exhibited a statistically significant higher shear bond strength than 10 % phosphoric and citric acid at 15 seconds etching time.(p<0.05).

• Restorative Dentistry and Endodontics
• /
• 제28권5호
• /
• pp.363-368
• /
• 2003

The purpose of this study is to evaluate the effect of additional enamel etching with phosphoric acid on the microleakage of the adhesion of self-etching primer system. Class V cavity($4mm{\times}3mm{\times}1.5mm$) preparations with all margins in enamel were prepared on buccal surface of 42 extracted human upper central incisor teeth. Prepared teeth were randomly divided into 3 groups. Group 1：no additional pretreatment with 37% phosphoric acid (NE). Group 2：additional pretreatment with 37% phosphoric acid for 10 seconds (E10s). Group 3：additional pretreatment with 37% phosphoric acid for 20 seconds (E20s). The adhesives(Clearfil SE $Bond^{\circledR}$, Kuraray, Osaka, Japan) and composite resins(Clearfil $AP-X^{\circledR}$, Osaka, Kuraray, Japan) were applied following the manufacturer's instructions. All the specimens were finished with the polishing disc(3M dental product, St Paul, MN, USA), thermocycled for 500 cycles between $5^{\circ}C$ and $55^{\circ}C$ and resected apical 3-mm root. 0.028 stainless steel wire was inserted apically into the pulp chamber of each tooth and sealed into position with sticky wax. Surrounding tooth surface was covered with a nail varnish 2 times except areas 1mm far from all the margins. After drying for one day, soaked the samples in the distilled water. Microleakage was assessed by electrochemical method(System 6514, $Electrometer^{\circledR}$), Keithley, USA) in the distilled water. In this study, the microleakage was the lowest in group 1 (NE) and the highest in group 3(E20s)(NE

• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.240-250
• /
• 1999

The purpose of this study was to evaluate the effect of different etching time on the shear bond strength and adaptibility of composite to enamel and dentin when used one-bottle adhesive Prime & Bond$^{TM}$ 2.0. The proximal and occlusal surfaces of 88 extracted human molars were ground to expose enamel(n=44) and dentin (=44) using diamond wheel saw. Teeth were randomly assigned to four test groups(n=11) and received the following treatments : Control group were conditioned with 36% phosphoric acid for 20 sec. according to the manufacturer's directions. Experimental 10 sec. group, 30 sec. group and 60 sec. group were conditioned with 36% phosphoric acid for 10 sec., 30 sec. and 60 sec., respectively. Teeth were rinsed and dried for 2 sec. Prime & Bond$^{TM}$ 2.0 were applied according to the manufacturer's directions and Spectrum$^{TM}$ TPH composite resins were bonded to enamel and dentin surfaces. All specimens were stored in distilled water for 24 hours. Eighty specimens were sheared in a Universal Testing Machine with a crosshead speed of 5mm/minute. One way ANOVA and LSD test were used for statistical analysis of the data. Failure modes of all specimens after shear bond strength test were examined and listed. Also, representive postfracture modes and eight specimens were examined under scanning electron microscope. The results of this study were as follows: 1. The shear bond strength to enamel was the highest value in 30 sec. group (20.68${\pm}$8.54MPa) and the lowest value in 10 sec. group (14.92${\pm}$6.07MPa), so there was significant difference of shear bond strength between two groups (p<0.05). But there was no significant difference among other groups (p>0.05). With longer etching time to enamel from 10 sec. to 30 sec., higher the shear bond strength was obtained, but the shear bond strength was decreased at 60 sec. etching time. 2. The shear bond strength to dentin was the highest value in control group (13.08${\pm}$6.25MPa) and the lowest value in 60 sec. group (9.47${\pm}$3.35MPa), but there was no significant difference among the all groups (p>0.05). The eching time over 20 sec. decreased the shear bond strength to dentin. 3. In SEM observation, the enamel and resin interfaces were showed close adaptation with no relation to etching time of enamel. And the dentin and resin interfaces were showed close adaptation at 20 sec. and 30 sec. etching time, but showed some gaps at 10 sec. and 60 sec. etching time. Accordingly, these results indicated that a appropriate etching time in Prime & Bond$^{TM}$ 2.0 was required to be 30 sec. in enamel and 20 sec. in dentin for the high shear bond strength and good adaptation between the composite resin and tooth substance.

• 대한소아치과학회지
• /
• 제36권4호
• /
• pp.514-521
• /
• 2009

이 연구의 목적은 유치와 영구치의 법랑질에 자가 산부식 접착제 적용 전 부가적인 산부식 시간을 달리 하였을 때, 전단결합강도에 미치는 영향을 알아보기 위함이다. 각각 65개의 발거된 건전한 유치와 영구치 협, 설면 법랑질 시편을 제작하고 두 종류의 자가 산부식 접착제를 적용하였다. 실험군은 $Clearfil^{TM}$ SE bond, $Adper^{TM}$ $Prompt^{TM}$ $L-pop^{TM}$으로 처리한 두 개 군으로 나누고, 이를 다시 산부식 시간에 따라 여섯 군(0, 5, 10, 15, 20, 30초)으로 분류하였다. 대조군으로는 total-etching system인 $Adper^{TM}$ $Scotchbond^{TM}$ Multi-purpose plus를 사용하였다. 접착제 처리면을 복합레진으로 충전하고 24시간 경과 후 전단결합강도를 측정하고 Mann-Whitney test와 Kruskal-Wallis test를 사용하여 통계분석 하였다. 결과는 자가 산부식 접착제를 적용한 군은 유치, 영구치 모두에서 total etching system에 비해 낮은 전단 결합강도를 보였다. 자가 산부식 접착제 사용 군내에서 산부식을 추가로 시행하였을 때 유치와 영구치 모두에서 결합강도가 증가하였으며, 10초 이상 산부식을 시행한 경우 결합력의 차이는 없는 것으로 나타났다. 유치와 영구치간 결합력의 차이는 인정되지 않았다. 결론적으로, 자가 산부식 접착제의 법랑질에 대한 전단결합강도는 유치, 영구치 모두에서 10초 이상의 부가적 산부식이 결합력의 증가에 유리하게 작용하는 것으로 나타났다.

• 대한소아치과학회지
• /
• 제10권1호
• /
• pp.85-93
• /
• 1983

In one group that tested for the effects of grinding and etching on the deciduous teeth, S.E.M. examination on the ground or unground labial surface of deciduous maxillary central incisors were made after etching procedure with 40% phosphoric acid for 60 secs., 120 secs., 180 sees. each. In another group that tested for the degree of resin penetration to the ground and etched deciduous teeth, composite resin application was done to the ground deciduous maxillary central incisors that had been acid-etched for 30 secs., 60 secs., 90 sees., 120 sees., 180 secs. each. The tooth-resin specimens were cut at the middle 1/3 of the crown by 2mm thickness, and the adjacent tooth materials were demineralized by 10% hydrochloric acid, the author observed the tags of the resin replica with S.E.M.. Following results were obtained. 1. After 40% phosphoric acid etching, the unground deciduous enamel surface showed various types of etching pattern. 2. For the formation of regular micropores on deciduous enamel surface by acid etching with 40% phosphoric acid, the time over 120 secs. should be requested. 3. After 40% phosphoric acid etching, the ground deciduous enamel surface showed the same etching pattern that has been a preferential removal of prism peripheries despite different etching time. 4. On the ground group that etched over 60 secs. to 180 secs., the length of tags was $5{\mu}m$ to $8{\mu}m$, with a mean of $7{\mu}m$.

• Restorative Dentistry and Endodontics
• /
• 제5권1호
• /
• pp.7-12
• /
• 1979

After applying three types of composite resins - Hi-Pol composite with Enamel bond, Hi-Pol composite without Enamel bond, Restodent - to the intact and the ground surface of tooth that had been acid etched for one or two minutes, the author observed the penetration of these resins into the acid etched enamel surface with scanning electron microscope. The results were as follows. 1. All the experimented materials showed the penetration into the acid etched enamel surface, and the average depth of penetration was 7 microns. 2. There was no significant difference in the penetration of these three resins despite different etching, time. 3. The grinding of the Enamel surface before acid - etching was not effective in altering the depth of penetration of these materials.

• 대한소아치과학회지
• /
• 제30권1호
• /
• pp.143-152
• /
• 2003

본 연구는 자가부식 접착제의 치질로의 침투와 레진 tag 형성을 알아보고 부가적인 산부식이 레진 tag 형성에 미치는 효과를 관찰하기 위하여 계획되었다. 3종의 자가부식 접착제(SE bond, AQ bond and L Pop)와 one bottle adhesive(Single bond)를 사용하였고 발거한 구치로 교합면 법랑질과 상아질 시편을 제작하였으며 각 군당 5개씩 네 개의 군으로 나눈 총 20개의 시편을 양분하여 각각 접착제를 적용하기 전 35% 인산으로 산부식하거나 산부식처리하지 않았으며 이후 레진을 적용시키고 중합하였다. 시편은 Silverstone microtome으로 절단한 후 HCl 용액과 NaOCl 용액으로 처리하고 건조시킨 후 이온으로 피복하였으며 주사전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. 부가적 산부식 처리한 상아질은 모든 자가부식 접착제군에서 산부식하지 않은 상아질보다 resin tag의 길이와 두께가 증가하는 것이 관찰되었다. 2. 법랑질에서는 L Pop을 제외하고 부가적 산부식한 군에서 레진 tag의 두께가 산부식하지 않은 군보다 컸고 보다 명확한 부식양상을 관찰할 수 있었다. L Pop에서는 부식법랑질과 비부식법랑질간의 차이가 없었다. 본 연구의 결과는 자가부식형 접착제가 법랑질을 부식시키지 않고 상아세관으로 침투하는 정도가 산부식군에 미치지 못하다는 것을 의미한다. 이와 관련하여 접착강도와 미세누출 및 레진 tag 형태에 대한 부가적 연구가 필요할 것이다.