• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.447-458
• /
• 1998

The spinel Ihelzolite of ultramafic xenoliths are found in the alkali basalt from eastern part of the Cheju island, Korea. The xenolith is are mainly composed of olivine, orthopyroxene, clinopyroxene and spinel. Based on the chemical compositions of the constituent minerals, the ultramafic xenolith belong to upper mantle peridotite. Each minerals have a protogranular texture. Olivine with kink band texture partly shows undulatory extinction. Some clinopyroxenes have spongy textured rims. Brown spinels occur in the interstices between olivine and pyroxene grains. Olivine is mostly forsterite $(Fo_{89-90})$. Orthopyroxene is enstatite $(Wo_{1.3}En_{88.4}Fs_{10.3})$ with 3.87~5.25 wt% $Al_{2}O_{3}$. Clinopyroxene is diopside $(Wo_{48.0}En_{46.2}Fs_{5.8})$ with 6.75~5.03 wt% $Al_{2}O_{3}$. Spinel has the Mg value of 75.9 and its Cr-number is 10.2. According to the PoT estimations for the mantle xenoliths, equilibrium temperatures of the xenoliths range from 1023 to $1038^{\circ}C$ and pressure is 18 kbar. Spinellhelzolite from this area, which is characterized by lower Cr-number (10.2) and homogeneous chemical compositions, supports that these ultramafic xenoliths are derived from the upper mantle.

• Korea-Australia Rheology Journal
• /
• v.12 no.1
• /
• pp.55-67
• /
• 2000

In this paper, an experimental study of the rheological behavior of granular flow in a new type of storage silo is presented. The main characteristic of the new design is a hexagonal shape chosen with the objective of minimizing the stresses applied to the stored grains, and to reduce grain damage during the filling and emptying processes. Measurements of stress distribution and flow patterns are shown for a variety of granular materials. Because of the design of the silo, the granular material adopts its natural rest angle at all times eliminating collisional stresses and impacts between grains. A homogeneous, low friction flow is naturally achieved which provides a controlled stress distribution throughout the silo during filling and emptying. Secondary dynamic stresses, which are responsible for wall failure in conventional silos of the vertical type, are completely eliminated. A comparison between the two geometries is presented with data obtained for these silos and a number of granular materials. The discharge pattern inhibits powder formation in the silo and the filling system virtually eliminates unwanted material packing. Finally, notwithstanding the rheological advantages of this new design, the hexagonal cells that constitute the silo have many other advantages, such as the possible use of solar energy to control the humidity inside them. The cell type design allows for versatile storage capabilities and the elevation above the ground provides unlimited transportation facilities during emptying.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.7
• /
• pp.930-938
• /
• 2019

Objective: Estimate genetic parameters, the rate of inbreeding, and the effect of inbreeding on growth and egg production traits of a Thai native chicken breed Lueng Hang Kao Kabinburi housed under intensive management under a tropical climate. Methods: Genetic parameters were estimated for weight measured at four weekly intervals from body weight at day 1 (BW1D) to body weight at 24 weeks (BW24) of age, as well as weight at first egg, age at first egg (AFE), egg weight at first egg, and total number of eggs (EN) produced during the first 17 weeks of lay using restricted maximum likelihood. Inbreeding depression was estimated using a linear regression of individual phenotype on inbreeding coefficient. Results: Direct additive genetic effect was significant for all traits. Maternal genetic effect and permanent environmental hen effects were significant for all early growth traits, expect for BW24. For BW24, maternal genetic effect was also significant. Permanent environmental hen effect was significant for AFE. Direct heritabilities ranged from 0.10 to 0.47 for growth traits and ranged from 0.15 to 0.16 for egg production traits. Early growth traits had high genetic correlations between them. The EN was lowly negatively correlated with other traits. The average rate of inbreeding for the population was 0.09% per year. Overall, the inbreeding had no effect on body weight traits, except for BW1D. An increase in inbreeding coefficient by 1% reduced BWID by 0.09 g (0.29% of the mean). Conclusion: Improvement in body weight gain can be achieved by selecting for early growth traits. Selection for higher body weight traits is expected to increase the weight of first egg. Due to low but unfavorable correlations with body weight traits, selection on EN needs to be combined with other traits via multi-trait index selection to improve body weight and EN simultaneously.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.10-11
• /
• 2018

In the building, the opening penetrates the wall and serves as a spreading channel for smoke and flame in case of fire. In Korea, more than 1,500 fire plume are generated annually, and the number has increased by about 30% over the past five years. Therefore, in the case of windows protecting the opening, fire protection performance is important to prevent the spread of fire. However, in Korea, the standard for window is not clear. In this study, fire tests (EN 13823) for windows were conducted in Korea, and then fire protection performance of windows was compared. As a result of the experiment, PVC windows showed a phenomenon that they could not withstand the temperature during the fire experiment, and AL windows showed a difference in the degree of cracking of the glass.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.8
• /
• pp.1181-1194
• /
• 2015

Tuberculosis (TB) is an infectious disease transmitted by aerosol droplets and characterized by forming granulomatous lesions. Although the number of people infected in the population is high, the vast majority does not exhibit symptoms of active disease and only 5-10% develop the disease after a latent period that can vary from weeks to years. The bases of the immune response for this resistance are unknown, but it depends on a complex interaction between the environment, the agent, and the host. The analysis of cellular components of M. tuberculosis shows important host-pathogen interactions, metabolic pathways, virulence mechanisms, and mechanisms of adaptation to the environment. However, the M. tuberculosis proteome still remains largely uncharacterized in terms of virulence and pathogenesis. Here, we summarize some of the major proteomic studies performed to scrutinize all the mycobacterial components.

• The Korean Journal of Mycology
• /
• v.25 no.1 s.80
• /
• pp.10-19
• /
• 1997

Fusarium wilt of radish (Raphanus sativus L.) is caused by the Fusarium oxysporum f. sp. raphani (FOR) which mainly attacks Raphanus spp. The pathogen is a soil-borne and forms chlamydospores in infected plant residues in soil. Infected pathogen colonizes the vascular tissue, leading to necrosis of the vascular tissue. Growth promoting beneficial organisms such as Pseudomonas fluorescens WCS374 (strain WCS374), P. putida RE10 (strain RE10) and Pseudomonas sp. EN415 (strain EN415) were used for microorganisms-mediated induction of systemic resistance in radish against Fusarium wilt. In this bioassy, the pathogens and bacteria were treated into soil separately or concurrently, and mixed the bacteria with the different level of combination. Significant suppression of the disease by bacterial treatments was generally observed in pot bioassy. The disease incidence of the control recorded 46.5% in the internal observation and 21.1% in the external observation, respectively. The disease incidence of P. putida RE10 recorded 12.2% in the internal observation and 7.8% in the external observation, respectively. However, the disease incidence of P. fluorescens WCS374 which was proved to be highly suppressive to Fusarium wilt indicated 45.6% in the internal observation and 27.8% in the external observation, respectively. The disease incidence of P. putida RE10 mixed with P. fluorescens WCS374 or Pseudomonas sp. EN415 was in the range of 10.0-22.1%. On the other hand, the disease incidence of P. putida RE10 mixed with Pseudomonas sp. EN415 was in the range of 7.8-20.2%. The colonization by FOR was observed in the range of $2.4-5.1{\times}10^3/g$ on the root surface and $0.7-1.3{\times}10^3/g$ in the soil, but the numbers were not statistically different. As compared with $3.8{\times}10^3/g$ root of the control, the colonization of infested ROR indicated $2.9{\times}10^3/g$ root in separate treatments of P. putida RE10, and less than $3.8{\times}10^3/g$ root of the control. Also, the colonization of FOR recorded $5.1{\times}10^3/g$ root in mixed treatments of 3 bacterial strains such as P. putida RE10, P. fluorescens WCS374 and Pseudomonas sp. EN415. The colonization of FOR in soil was less than that of FOR in root part. Based on soil or root part, the colonization of ROR didn't indicate a significant difference. The colonization of introduced 3 fluorescent pseudomonads was observed in the range of $2.3-4.0{\times}10^7/g$ in the root surface and $0.9-1.8{\times}10^7/g$ in soil, but the bacterial densities were significantly different. When growth promoting organisms were introduced into the soil, the population of Pseudomonas sp. in the root part treated with P. putida RE10 was similar in number to the control and recorded the low numerical value as compared with any other treatments. The population density of Pseudomonas sp. in the treatment of P. putida RE10 indicated significant differences in the root part, but didn't show significant differences in soil. The population densities of infested FOR and introduced bacteria on the root were high in contrast to those of soil. P. putida RE10 and Pseudomonas sp. EN415 used in this experiment appeared to induce the resistance of the host against Fusarium wilt.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.1
• /
• pp.75-84
• /
• 2016

This study is to analyze the efficiency of oriental hospitals using DEA. The input variables are the numbers of doctors, nurses, medical technicians, and beds. The output variables are the numbers of annual inpatients and outpatients. The statistical analysis tools used are EnPas and IBM SPSS Statistics 19. The result in efficiency analysis by establishment type showed that the national and public hospitals had the most efficiency. In the case of location, the efficiency of the oriental hospitals in Seoul was the highest but those in the Metropolitan areas had a relatively low efficiency. If the number of the beds was generally less than 50 beds, the hospitals were highly efficient, but the hospitals in the medium category of 51-100 beds were low in efficiency. The Logistic regression analysis conducted to analyze the variables that have affected the efficiency of oriental hospitals resulted that the efficiency increased by 1.045 everytime the number of nurses increased by 1.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.371-381
• /
• 2014

The bioaccumulation of 16 United States Environmental Protection Agency (USEPA) priority polycyclic aromatic hydrocarbons (PAHs) and alkylated PAHs in the Manila clam, Ruditapes philippinarum exposed to sediments artificially contaminated by Iranian Heavy Crude Oil was measured and the biota-sediment accumulation factor (BSAF) was estimated through laboratory experiments. The proportion of 16 PAHs accumulated in the tissue of R. philippinarum was only from 3 to 7% of total PAHs. Among 16 PAHs, the concentration of naphthalene was highest in the tissue. Alkylated PAHs were highly accumulated more than 93% of total PAHs. The C3 dibenzothiophene was most highly accumulated. The relative composition of alkylated naphthalenes in the tissue of R. philippinarum was lower than in the sediments. In contrast, those of alkylated compounds of fluorenes, phenanthrenes, dibenzothiophenes were higher in the tissue than the sediments. The BSAF for sum of 16 PAHs was 0.11 to 0.13 g carbon/g lipid and that for alkylated PAHs was 0.05 to 0.06 g carbon/g lipid. Naphthalene showed the highest BSAF value. Alkylated PAHs with the same parent compound, BSAF tended to increase with the number of alkylated branch increased, except for alkylated chrysenes. BSAF of total PAHs lies between that of field-based values, and are also similar to those of other persistent organic pollutants (PCBs, DDTs, HCHs). This study provides the BSAF values of individual alkylated PAHs accumulated in R. philippinarum for the first time and will be used as a basis for further understanding the bioaccumulation of organic contaminants in the marine benthic organisms.

• Journal of the Korean Mathematical Society
• /
• v.37 no.3
• /
• pp.437-454
• /
• 2000

Let C be a smooth k-gonal curve of genus g. We study the number of pencils of degree k on C. In case $g\geqk(k-a)/2$ we state a conjecture based on a discussion on plane models for C. From previous work it is known that if C possesses a large number of pencils then C has a special plane model. From this observation the conjectures are split up in two cases : the existence of some types of plane curves should imply the existence of curves C with a given number of pencils; the non-existence of plane curves should imply the non-existence of curves C with some given large number of pencils. The non-existence part only occurs in the range $k(k-1)/2\leqg\leqk(k-1)/2] if k\geq7$. In this range we prove the existence part of the conjecture and we also prove some non-existence statements. Those result imply the conjecture in that range for $k\leq10$. The cases $k\leq6$ are handled separately.

• Journal of Biomedical Engineering Research
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2003

The job of long distance driving is likely to be fatiguing and requires long period alertness and attention, which make considerable demands of the driver. Driving fatigue contributes to driver related with accidents and fatalities. In this study, we investigated the relationship between the number of hours of driving and driving fatigue using heart rate variability(HRV) signal. With a more traditional measure of overall variability (standard deviation, mean, spectral values of heart rate). Nonlinear characteristics of HRV signal were analyzed using Approximate Entropy (ApEn) and Poincare plot. Five subjects drive the four passenger vehicle twice. All experiment number was 40. The test route was about 300Km continuous long highway circuit and driving time was about 3 hours. During the driving, measures of electrocardiogram(ECG) were performed at intervals of 30min. HRV signal, derived from the ECG, was analyzed using time, frequency domain parameters and nonlinear characteristic. The significance of differences on the response to driving fatigue was determined by Student's t-test. Differences were considered significant when a p value < 0.05 was observed. In the results, mean heart rate(HRmean) decreased consistently with driving time, standard deviation of RR intervals(SDRR), standard deviation of the successive difference of the RR intervals(SDSD) increased until 90min. Hereafter, they were almost unchanging until the end of the test. Normalized low frequency component $(LF_{norm})$, ratio of low to high frequency component (LF/HF) increased. We used the Approximate Entropy(ApEn), Poincare plot method to describe the nonlinear characteristics of HRV signal. Nonlinear characteristics of HRV signals decreased with driving time. Statistical significant is appeared after 60 min in all parameters.