• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1478-1486
• /
• 2018

Liquid crystals offer plenty of useful activities as improving the stability of emulsion, increasing moisturizing power, drug release, improving skin feeling and visual effect for cosmetics fields. In order to prepare stable semi-transparent gel emulsion, liquid crystal emulsification method was used. The emulsion stabilities of systems containing glycerin, fatty alcohols, surfactants, water and oil were investigated at various temperatures as time passed. The stabilities of all emulsions were evaluated by means of a polarizing microscope, SEM, rheometer, colorimeter and DSC. Even though the samples stored at $50^{\circ}C$ thermostatic chamber were occurred the reduction of hardness, turbidity and ${\Delta}H$ and the peak shift, the semi-transparent gel emulsion was very stable without separation between water and oils phase in emulsion.

• 한국식품영양과학회지
• /
• 제43권10호
• /
• pp.1549-1554
• /
• 2014

메밀 성분 중 루틴의 추출 효율을 높이기 위해 메밀을 발아한 후 루틴 및 polyphenol 추출 효율이 높은 추출방법을 선택하였다. 메밀의 발아는 흙 재배가 효율적이었으며, 8일 후에는 polyphenol 함량이 10.66 mg/g으로 메밀 종자에 함유되어 있던 polyphenol 함량의 10배 이상 높은 양을 얻을 수 있었다. 발아 메밀에서 추출된 루틴을 포함한 polyphenol 성분은 에멀젼을 제조하여 열에 대한 안정성을 높이는 데 효율이 있는지를 확인하였다. 에멀젼은 homo mixer만을 통과시키는 것보다 유압식 균질기를 통과시켰을 때 포접 효율이 높을 뿐만 아니라 열처리 온도에 대하여 열 안정성이 우수한 것을 알 수 있었다.

• 한국식품조리과학회지
• /
• 제9권1호
• /
• pp.43-51
• /
• 1993

Buckwheat protein isolate was tested for the effects of pH, addition of sodium chloride and heat treatment on solubility, emulsion capacities, emulsion stability, surface hydrophobicity, foam capacities and foam stability. The solubility of buckwheat protein isolate was affected by pH and showed the lowest value at pH 4.5, the isoelectric point of buckwheat protein isolate. The solubility significantly as the pH value reached closer to either ends of the pH, i.e., pH 1.0 and 11.0. The effects of NaCl concentration on solubility were as follows; at pH 2.0, the solubility significantly decreased when NaCl was added; at pH 4.5, it increased above 0.6 M; at pH 7.0 it increased; and at pH 9.0 it decreased. The solubility increased above $80^{\circ}C$, at all pH ranges. The emulsion capacity was the lowest at pH 4.5. It significantly increased as the pH approached higher acidic or alkalic regions. At pH 2.0, when NaCl was added, the emulsion capacity decreased, but it increased at pH 4.5 and showed the maximum value at pH 7.0 and 9.0 with 0.6 M and 0.8 M NaCl concentrations. Upon heating, the emulsion capacity decreased at acidic pH's but was maximised at pH 7.0 and 9.0 on $60^{\circ}C$ heat treatment. The emulsion stability was the lowest at pH 4.5 but increased with heat treatment. At acidic pH, the emulsion stability increased with the increase in NaCl concentration but decreased at pH 7.0 and 9.0. Generally, at other pH ranges, the emulsion stability was decreased with increased heating temperature. The surface hydrophobicity showed the highest value at pH 2.0 and the lowest value at pH 11.0. As NaCl concentrationed, the surface hydrophobicity decreased at acidic pH. The NaCl concentration had no significant effects on surface hydrophobicity at pH 7.0, 9.0 except for the highest value observed at 0.8 M and 0.4 M. At all pH ranges, the surface hydrophobicity was increased, when the temperature increased. The foam capacity decreased, with increased in pH value. At acidic pH, the foam capacity was decreased with the increased in NaCl concentration. The highest value was observed upon adding 0.2 M or 0.4 M NaCl at pH 7.0 and 9.0. Heat treatments of $60^{\circ}C$ and $40^{\circ}C$ showed the highest foam capacity values at pH 2.0 and 4.5, respectively. At pH 7.0 and 9.0, the foam capacity decreased with the increased in temperature. The foam stability was not significantly related to different pH values. The addition of 0.4 M NaCl at pH 2.0, 7.0 and 9.0 showed the highest stability and the addition of 1.0 M at pH 4.5 showed the lowest. The higher the heating temperature, the lower the foam stability at pH 2.0 and 9.0. However, the foam stability increased at pH 4.5 and 7.0 before reaching $80^{\circ}C$.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.75-85
• /
• 2017

PURPOSES : The purpose of this study was to determine the optimum mix design of the content of 100 % reclaimed asphalt pavement (RAP) for spray injection application with different binder types. METHODS : Literature review revealed that spray injection method is the one of the efficient and economical methods for repairing a small defective area on an asphalt pavement. The Rapid-Setting Polymer modified asphalt mixtures using two types of rapid setting polymers-asphalt emulsion and a quick setting polymer asphalt emulsion-were subjected to the following tests to determine optimum mix designs and for performance comparison: 1) Marshall stability test, 2) Retained stability test, 3) Wet track abrasion test, and 4) Dynamic stability test. RESULTS and CONCLUSIONS : Type A, B, and C emulsions were tested with different mix designs using RAP aggregates, to compare the performances and determine the optimum mix design. Performance of mixtures with Type A emulsion exceeded that of mixtures with Type B and C emulsion in all aspects. In particular, Type A binder demonstrated the highest performance for WTAT at low temperature. It demonstrated the practicality of using Type A mixture during the cold season. Furthers studies are to be performed to verify the optimum mix design for machine application. Differences in optimum mix designs for machine application and lab application will be corrected through field tests.

• Korea-Australia Rheology Journal
• /
• 제15권3호
• /
• pp.125-130
• /
• 2003

The emulsion stability of cosmetic creams based on the water-in-oil (W/O) high internal phase emulsions (HIPEs) containing water, squalane oil and cetyl dimethicone copolyol was investigated with various compositional changes, such as electrolyte concentration, oil polarity and water phase volume fraction. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The slope change of complex modulus versus water phase volume fraction monitored in the linear viscoelastic region could be explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsions: the greater the increase of complex modulus was, the more the coalescence occurred and the less consistent the emulsions were. Emulsion stability was dependent on the addition of electrolyte to the water phase. Increasing the electrolyte concentration increased the refractive index of the water phase, and thus decreased the refractive index difference between oil and water phases. This decreased the attractive force between water droplets, which resulted in reducing the coalescence of droplets and increasing the stability of emulsions. Increasing the oil polarity tended to increase emulsion consistency, but did not show clear difference in cream hardness among the emulsions.

• 분석과학
• /
• 제7권2호
• /
• pp.233-236
• /
• 1994

유중수적형 유화계의 유화안정지수를 산출하는 방법을 확립하기 위하여 간편하면서도 예민한 "부피 직접 측정법"을 개발하였는 바, 먼저 강력한 혼합기인 일종의 Ultra-turrax T25를 이용하여 유지방, 유화제 및 물로 구성되면서 유지방이 물보다 많이 함유되는 유중수적형의 유화계를 형성시킨 후 상온에서 시간이 경과함에 따라 분리되어지는 수분층의 부피를 측정하였으며, 유화안정지수는 $(1-V_s/V_a){\times}100$(단, $V_a$는 유화계내에 함유되어 있는 총 수분의 부피이며, $V_s$는 시간이 경과함에 따라 유화계로부터 분리되어지는 수분층의 부피를 의미한다)의 계산식에 대입하여 산출하였다. 한편, sorbitan trioleate, span 60 및 tween 20을 첨가하여 유중수적형 유화계를 형성시킨 후 90분이 경과한 다음 "부피 직접 측정법"에 의하여 유화안정지수를 산출하였는바, 각각 $95.4{\pm}1.8$, $56.1{\pm}2.8$ 및 $41.6{\pm}2.2$였으며, 이러한 값은 유화안정지수의 산출방법으로서 일반적으로 사용하고 있는 "Titus의 방법"과 비교해 볼 때 5.0 이내의 차이-유화안정지수가 평형에 도달하였을 때의 차이 값-를 나타냄을 알 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.673-679
• /
• 2004

A microbial cryoprotectant formulation using a W/O/W multiple emulsion system was developed. The psychrotolerant microorganism, B4, isolated from soil in South Korea, was observed by the drop freezing method, in which the microorganism sample inhibited ice nucleation activity. The antifreeze activity was eliminated when the microorganism sample was treated with protease, indicating that the antifreeze activity was due to the presence of antifreeze protein. The result of the l6S rDNA sequencing indicated the B4 strain was most closely related to a species of the genus Bacillus. Culture broth of B4 strain (Bacillus sp.) and rapeseed oil containing 1 % polyglycerine polyricinolate (PGPR) were used as core and wall material, respectively. The most stable W/O emulsion was prepared at a core/oil ratio of 1:2. The highest W/O/W emulsion stability was achieved when the primary emulsion to external aqueous phase containing 0.5% caster oil polyoxyethylene ether $(COG25^{TM})$ ratio was 1:1. Microcrystalline cellulose showed better W/O/W emulsion stability than other polymer types. The viability of cells in a W/O/W emulsion was higher than free cells during storage at $37^\circ{C}$. An acidic pH and UV exposure decreased the viability of free cells, but cells in W/O/W emulsion were more stable under these conditions.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.111-115
• /
• 1998

We investigated the stability of all-trans-retinol on the liquid crystalline O/W emulsion composed of mainly alkyl polyglycerine, alkyl polyglucose and glycerine, and compared the activity of all-trans-retinol in the various forms of liquid crystal. Under certain conditions, novel liquid crystalline gel was formed around oil droplets, and layers of this liquid crystalline gel were very wide and rigid. (SWLC; Super Wide Liquid Crystal) SWLC was very helpful to stabilize retinol in O/W emulsion. After storage at 45 C for 4 weeks, all-trans-retinol in O/W emulsion composed of SWLC retained above 85% of the activity upon HPLC analysis, whereas those within no liquid crystalline emulsion gave 47% and normal liquid crystalline emulsion composed of fatty alcohols gave 40 60%. Retinol in oil phase is nealy insoluble in pure water, but in cosmetic emulsion systems can be slightly solubilized into water because emulsifiers and polyols in emulsion systems function as solubilizers. In this case, water in outer phase acts as a media for oxygen transporation$.$and thus destabilizes retinol. As a result, retinol in O/W emulsion has a tendency to become unstable. SWLC surrounding oil droplet which contains retinol is wide and rigid, therefore reduces contact between inner phase and outer phase To make SWLC, properties of emulsifiers are very important phase transition temperature should be high, and the structure of surfactants should be bulky, and their ratio should be suitable to make rigid and wide liquid crystalline gel layer in order to reduce contact between retinol in inner phase and water in outer phase.

• 한국식품영양과학회지
• /
• 제42권6호
• /
• pp.933-940
• /
• 2013

본 연구는 urea fractionation을 통하여 포화도 함량이 5.8%, 28.4%, 39.2%, 50.7%, 72.3%인 우지 alcoholysis 반응물을 제조하고, 이를 유상(oil phase)으로 ultrasonic processor 및 고압균질기를 이용하여 emulsion을 제조한 후 이에 대한 유화 안정성과 산화 안정성을 실험하였다. 유화 안정성(ES)을 관찰한 결과 ES값은 46.0(${\Sigma}$SFA5), 39.5(${\Sigma}$SFA28), 32.7(${\Sigma}$SFA39), 32.6(${\Sigma}$SFA50) 및 27.3(${\Sigma}$SFA72)로써 포화도가 낮은 emulsion일수록 높은 안정성을 보였으며, Turbiscan을 이용하여 시료 emulsion의 creaming 및 clarification 특성을 조사한 결과도 ES 결과와 유사하게 나타났다. 고압균질기로 제조한 emulsion 시료에 대하여 30일간 산화특성 및 안정성 연구를 진행한 결과, 제조한 emulsion의 hydroperoxides 함량이 1.880(${\Sigma}$SFA5), 1.267(${\Sigma}$SFA28), 1.062(${\Sigma}$SFA39), 0.342(${\Sigma}$SFA50) 및 0.153(${\Sigma}$SFA72)mg $H_2O_2/mL$로 서로 유의적 차이(p<0.05)를 나타내면서 불포화도가 높은 emulsion 시료일수록 hydroperoxide의 함량이 높았고, TBARS 값은 저장 30일에 6.229(${\Sigma}$SFA5), 6.801(${\Sigma}$SFA28), 6.246(${\Sigma}$SFA39), 4.419(${\Sigma}$SFA50) 및 4.226(${\Sigma}$SFA72) mg TBA/mL로 ${\Sigma}$SFA50과 ${\Sigma}$SFA72가 다른 emulsion 시료보다 유의적으로(p<0.05) 낮은 값을 보이며 산화 안정성이 우수하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2002년도 추계학술발표논문집
• /
• pp.209-217
• /
• 2002

Stability deterioration of AKD emulsion was studied with respect of the physical change of emulsion particles and the chemical change of AKD itself. Four kinds of commercial emulsions were kept at RT, 40, 50, and $60^{\circ}C$ water bath, respectively. Viscosity, particle size distribution, and solid contents of the emulsions were measured with storage time. At the same time, by performing NMR and IR spectroscopy analysis of the solvent-extracted AKD from the emulsions, the qualitative and quantitative information about the deformation of the AKD itself were obtained. AKD was gradually hydrolyzed to become dialkylketone and higher storage temperature accelerated destabilization of the AKD emulsions.