• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.320-325
• /
• 2009

The effects of adding additives such as vital gluten, gum, emulsifier, and enzyme to rice flour on baking quality were examined. The effects of different gums on the pasting and dough properties of rice flour containing vital gluten were studied using a Rapid Visco Analyzer (RVA) and a Brabender farinograph. The RVA peak, breakdown, and final viscosities decreased with the addition of gums, while setback viscosity increased. The farinogram showed that rice flour supplemented with gums such as tara gum, guar gum, and locust bean gum (LBG) increased water absorption and dough stability, yielding strengthened dough similar to wheat flour dough. The addition of guar or tara gum/sodium stearoyl lactylate (SSL)/fungal $\alpha$-amylase (AMYL) or glucose oxidase (GO) blend improved the volume and reduced the crumb firmness of rice bread prepared from rice flour containing 14% vital gluten. Therefore, the combined addition of gum, emulsifier and enzyme into rice flour significantly improved the rice bread quality, allowing the decrease of the vital gluten level in rice bread formula.

• Korean Journal of Agricultural Science
• /
• v.49 no.1
• /
• pp.45-50
• /
• 2022

The aim of this study is to evaluate the effects of supplementation of low-energy diets with PROSOL^® (sodium stearoyl-2-lactylate) as an emulsifier on the growth performance and nutrient digestibility of growing pigs. A total of 120 crossbred ([Landrace × Yorkshire] × Duroc) growing pigs with an average initial body weight of 23.80 ± 4.87 kg were used in a 56-day feeding trial and were sorted into three dietary treatments. Each treatment utilized eight replications with five pigs per pen. The dietary treatments were as follows: PC (high, net energy diet [NE] = 2,488 kcal·kg^-1 [weeks 1 to 4] and NE = 2,477 kcal·kg^-1 [weeks 5 to 8]); NC (low, NE = 2,472 kcal·kg^-1 [weeks 1 to 4] and NE = 2,468 kcal·kg^-1 [weeks 5 to 8]); NC1 (NC + 0.05% PROSOL^® emulsifier). Growth performance outcomes were measured at the initial point and at weeks 4 and 8 while nutrient digestibility parameters were measured at weeks 4 and 8. From weeks 1 - 8, body weight and the average daily gain of the NC1 group pigs showed significant increases (p < 0.05) compared to those of the PC and NC treatment groups. At the end of the trail, pigs fed a diet containing low net energy with 0.05% of the emulsifier showed reduced feed conversion ratio (FCR) levels. However, the average daily feed intake and nutrient digestibility of dry matter and nitrogen remained unaffected throughout the experiment. In summary, the addition of a low-net-energy diet with 0.05% sodium stearoyl-2-lactylate as an emulsifier enhanced the body weight and daily gain with no adverse effects on nutrient digestibility in growing pigs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.1
• /
• pp.50-60
• /
• 1998

As a method to develop an enhanced heat transfer fluid, the fine particles of a phase-change material were mixed with a conventional heat transfer fluid. Paraffin, which can be obtained easily in domestic market, was used for the phase-change material and water was used as a carrier fluid. Fine liquid particles of paraffin were formed in water as an emulsion by using an emulsifier, and they were cooled rapidly to become solid particle, resulting in paraffin slurry. The average diameter of produced solid particles was inversely proportional to the amount of the added emulsifier, which was theoretically proved. The produced paraffin slurry was tested thermally in heat transfer test section having a constant-heat-flux boundary condition. The test section was made of a circular stainless-steel pipe, which was directly heated by the power supply having a maximum of 50 Volts-500 Amperes. DSC(Differential scanning calorimeter) tests showed that two kinds of phase change were involved in the melting of paraffin, and it was explained in two different ways. A five- region-melting model was developed by extending the conventional three-region-melting model, and was used to obtain the local bulk mean temperatures of paraffin slurry in the heating test section. The local heat transfer coefficient showed a maximum where the bulk mean temperature of the paraffin slurry reached at the melting temperature of paraffin.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.3 s.39
• /
• pp.271-280
• /
• 1991

Emulsion graft copolymerization of MMA onto cotton fiber using Ce(IV) salt as an initiator was carried out. Graft yield and graft efficiency were observed according to the kinds and concentrations of emulsifier and polymerization conditions. The physical properties of MMA grafted cotton fabric were investigated. The results of this study were as follows: 1. The heighest graft yield of emulsion graft polymerization occurred at the concentration below cmc of emulsifier, which was different from emulsion polymerization. Nonionic sur- factant as an emulsifier was more effective than anionic one. 2. The highest graft yield was obtained at the initiator concentration $1{\times}10^{-2}mol/l$. The viscometric molecular weight of PMMA was in the order of 106. 3. As reaction time increased, the graft yield increased but the graft efficiency decreased. 4. Elevation of reaction temperature resulted in increase of graft yield. The apparent activation energy of MMA graft polymerization was 4.72 Kcal/mol. 5. Physical properties of MMA grafted cotton fabric varied with increase of grafting. Thickness and stiffness showed a noticeable increase, whereas tensile strength and elongation was slightly increased. Crease recovery increased as the graft yield increase up to $50\%$ and decreased thereafter.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.4
• /
• pp.284-288
• /
• 2001

Lipid emulsions with saturated triacylglycerols (TAGs) with 4 to 10 carbons in each acyl chain were prepared to study how the oil component alters the stability of the lipid emul-sions when phosphatidylcholines were used as emulsifiers. The average droplet size of the emul-sions became smaller as the chain length of the TAG increased. For a given oil emulsion with smaller droplets was formed with an emulsifier having higher HLB value. The influence of HLB values on the droplet size was biggest for the tributyrin (C4) emulsion. For the tricaprylin(C8) emulsions, droplet size was identical at given emulsifier concentrations regardless of HLB values. The HLB value and the concentration of the emulsifiers also affect the droplet size of the emul-sions. The emulsions with smaller average droplet size were more stable than with bigger size for 20 days. The oil and water (o/w) interfacial tension in inversely proportional to the initial droplet size of the emulsion.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.69-74
• /
• 2001

Diaper rash is found on the skin inside of babys diaper area. Most diaper rashes are caused by prolonged contact with the moisture, germs, and ammonia of the stool and urine. Some diaper rashes are caused by fungi infection such as candida albicans and Preteus vulgaris. In this study, Candida albicans was used as a test microorganism and experiment was carried out to inhibit diaper rash. Handsheets were treated with chitosan oligosaccharide, bamboo extractives, as well as mixture of monolaurin as an emulsifier and bamboo extractives. Both shake flask method and halo test were applied in order to examine the antimicrobial activity of each sample. It was found from both results of the halo test and shake flask method that handsheets treated with chitisan oligosaccharide or bamboo extractives showed antimicrobial property. In the treatment of bamboo extractives without emulsifier, no distinct difference in antimicrobial effect was found between bamboo branch and bamboo leaves extractives. In case of mixture of bamboo extractives and emulsifier, the result also suggested that bamboo branch showed better syngergistic effect than bamboo leaves. Both chitosan oligosaccharide and bamboo extractive can be used as antifungal agents against Candida albicans for making diaper.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1077-1083
• /
• 1999

This study was aimed to evaluate the effectiveness of hydrophilic, lipophilic antioxidants and emulsifiers by HLB (hydrophilic lipophilic balance) in different oil systems. Lipophilic antioxidant (${\delta}-tocopherol$), hydrophilic antioxidant (gallic acid) and emulsifier(lecithin, tween 20, span 60) were evaluated in relation to oil stability in bulk oil system (soybean oil) and emulsified with Tween 80 at $60^{\circ}C$. In the storage test ($60^{\circ}C$), gallic acid was more effective on the stability of oil oxidation than ${\delta}-tocopherol$ in bulk and emulsion system. Lecithin as a hydrophilic emulsifier was more effective than tween 20 on the stability of oil oxidation in bulk and emulsion system. Also span 60, a lipophilic emulsifier, was more effective than tween 20, a hydrophilic emulsifier, in bulk and emulsion systems.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.682-689
• /
• 2018

In this paper, the stability criteria of cosmeceuticals emulsion containing Broussonetia kazinoki extracts was established using the central composite design model. As optimization conditions of the emulsification using the central composite design model, concentrations of the emulsifier and emulsion stabilizer were used as a quantitative factor while emulsion stability index (ESI) and polydispersity index (PDI) were used as a reaction value. The targeted values of ESI and PDI were estimated as over 60% and the minimum number, respectively. Optimized concentrations of the emulsifier and emulsion stabilizer were 3.73 and 3.07 wt%, respectively, from the emulsification optimization based on ESI and PDI values. The estimated reaction values of ESI and PDI were 60% and 0.585, respectively. As concentrations of the emulsifier and emulsion stabilizer increased, the stability of the emulsion prepared tended to increase. The emulsifier was one of the most influential factors for ESI than the emulsion stabilizer. On the other hand, the PDI value was similarly affected by both the emulsion and emulsion stabilizer. The ESI of the cosmeceuticals emulsion prepared under experimental conditions deduced from the central synthesis planning model showed at least about 45% of the stability. However, all of the emulsions were separated after 4 weeks from the initial preparation. When the concentration of the emulsifier was more than 3.72 wt%, the ESI value was over 60%. Also the layer separation rate decreased with increasing the emulsion stabilizer concentration.

• Korean Journal of Food Science and Technology
• /
• v.52 no.6
• /
• pp.670-677
• /
• 2020

To prevent contamination by Campylobacter jejuni during chicken carcass processing, the effect of emulsifiers on C. jejuni inoculated on chicken skin was investigated using confocal laser scanning microscopy. Among the 8 emulsifiers (SWA-10D, L-7D, M-7D, S-1670, L-1695, P-1670, polysorbate 20, polysorbate 80) tested for antimicrobial activity by the paper disk method, 4 emulsifiers (L-7D, L-1695, polysorbate 20, polysorbate 80) were screened further. Emulsifier L-1695 showed the largest clear zone at a concentration of 200 mg/mL. The 4 emulsifiers subjected to primary screening were screened for heat and pH stability. In the contact surface test, emulsifier L-1695 showed the lowest log CFU/㎠ value on both stainless steel and ceramic surfaces. When emulsifier L-1695 was applied via general and electrostatic spray methods, the number of C. jejuni entrapped inside chicken skin follicles was significantly reduced in both methods. In conclusion, the emulsifier L-1695 could be employed as a microbial detachment agent in the chicken carcass processing industry.

• Korean Journal of Poultry Science
• /
• v.49 no.2
• /
• pp.61-67
• /
• 2022

The effects of dietary exogenous hydrophilic emulsifiers on the growth, nutrient digestibility, and carcass characteristics of broilers were evaluated. A total of 200 one-day-old broilers (Ross 308) were allotted to one of four treatment groups in a randomized complete block design in five replicates with 10 birds per pen during a 5-week growth experimental period. Birds were fed a corn-soybean meal-based diet with or without the addition of 0.025, 0.050, or 0.075% exogenous hydrophilic emulsifiers. The diets contained 3,025 and 3,075 metabolizable energy/kg for Phases 1 and 2, respectively. For each phase and the overall experimental period, body weight gain (linear, P<0.05) and feed conversion ratio (linear, P<0.05) improved in proportion to the dietary exogenous hydrophilic emulsifier level, while the average daily feed intake was not affected by dietary treatment. Improvement in growth performance by dietary treatments was observed during the last two weeks rather than the first three weeks of the growth phase. In carcass traits, abdominal fat content increased as dietary exogenous hydrophilic emulsifier level increased (linear, P<0.05), whereas dietary emulsifier level did not affect the relative weight of the liver, breast, and leg muscles. In conclusion, addition of dietary exogenous hydrophilic emulsifiers from 0 to 0.075% in broiler diets improved the growth rate and feed efficiency of broilers without any deleterious effects on nutrient digestibility, although a corn-soybean meal-based diet had less energy content (3,025 and 3,075 metabolizable energy/kg) for 0-3 weeks and 3-5 weeks, respectively.