• 제목/요약/키워드: Empty Bed Contact Time

검색결과 44건 처리시간 0.027초

염색폐수 색도 제거를 위한 영가철 기술 최적화 (Optimization of Zero-valent Iron Technology for Color Removal from Real Dye Wastewater)

  • 이재우;오영기;차구현;이태원;고광백
    • 한국물환경학회지
    • /
    • 제25권5호
    • /
    • pp.758-763
    • /
    • 2009
  • This study presents the optimal conditions of zero-valent iron (ZVI) pretreatment for color removal from real dye wastewater. Removal of color by ZVI was strongly subject to the acidity of the wastewater buffering the pH increased after ZVI reduction. The real dye wastewater did not contain a sufficient amount of acidity and thus it was necessary to supplement acid to the dye wastewater before treatment. In continuous operation of iron column, the empty bed contact time (EBCT) and initial pH were varied to find the optimal conditions. A non-linear regression model fitted well the experimental result predicting that the optimal EBCT and pH for 80% removal efficiency was present in the range of 57~90 and 5~5.9, respectively. Color of column effluents could be further removed in the following biological oxidation step and the biodegradability of wastewater was also enhanced after iron pretreatment.

음용수로부터 동화성 유기물질의 제거를 위한 생물학적 공정개발 (Development of biological processes for the removal of assimilable organic carbon from potable water)

  • 이민규;감상규
    • 생명과학회지
    • /
    • 제10권1호
    • /
    • pp.14-21
    • /
    • 2000
  • 음요수 중의 유기탄소의 제거수단으로써 biofiltration법의 타당성을 검토하였다.NOM에서의 생분해 가능한 분율을 알아보기위하여 행하여 졌다. UV 조사량을 3가지로 달리하였을 경우에 회분식에서의 생분해능과 비교하였다. 생물여과 반응기 실험의 경우에 생분해 특성을 검토한 결과 EBCT, 순환비 및 유입농도등과 같은 운전피라미터들이 생물여과 반응기의 생분해능에 영향을 미침을 알 수있었다. 생물여과 반응기의 유출수에서의 UV/DOC의 비는 반응기에 공급되는 원료중의 UV/DOC비에 비해 증가하였으며, 이로부터 생분해에 의해 저거된 DOC는 UV에 의해 그다지 흡수되지 않는 물질임을 알 수있었다. 본 여눅를 통해 생분해 가능한 DOC의 부분을 제거하는데 있어서 생물여과공법이 효과적인 방법이라는 것을 알수있었으며 UV처리와 bilfiltration을 연계한 공정은 수처리 시설에서 유출수의 DOC농도는 낮추는데 효과적인 한가지 방안으로 사료되었다.

  • PDF

Application of Biological Activated Carbon Process for Water Quality Improvement of Stagnant Stream Channels

  • Lee, Jae-Ho;Park, Jeung-Jin;Park, Tae-Joo;Byun, Im-Gyu
    • Environmental Engineering Research
    • /
    • 제19권4호
    • /
    • pp.309-316
    • /
    • 2014
  • The water quality improvement of golf course ponds, as representative stagnant stream channels, was evaluated by applying a biological activated carbon (BAC) process composed of four consecutive activated carbon reactors. The study was performed from autumn to winter in order to evaluate the feasibility of the BAC process under low temperature conditions. In the study, water quality of pond A (target pond) and pond B (reference pond) were monitored. Pond water was pumped into the BAC process, and was then returned to the pond after treatment. The optimal conditions were determined to be 2 hr of empty bed contact time (EBCT) at a temperature above $4^{\circ}C$, in which improvements of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP) of pond A compared to pond B were 3.62%, 3.48% and 1.81%, respectively. On the other hand, as the temperature was below $4^{\circ}C$, some degree of water quality improvement was achieved even when EBCT were 1 or 0.5 hr, suggesting that the BAC process can be successfully applied for the improvement of pond water quality in winter months. The values of biomass concentration and microorganism activity in each condition were highest where 2 hr of EBCT was applied at a temperature above $4^{\circ}C$, but values were similar throughout all treatment conditions, and thus, adsorption is considered to be the dominant factor affecting process efficiency. From the denaturing gel gradient electrophoresis (DGGE) results, no significant differences were observed among the activated carbon reactors, suggesting that the number of reactors in the system could be decreased for a more compact application of the system.

인 제거 입상소재를 적용한 여과수로 설계인자의 실험적 결정 (Experimental determination of design parameters for filtration trench using phosphorus removal granular materials)

  • 장여주;임현만;정진홍;안광호;장향연;박나리;김원재
    • 상하수도학회지
    • /
    • 제33권1호
    • /
    • pp.9-16
    • /
    • 2019
  • The algal blooms in stagnant streams and lakes have caused many problems. Excessive algae leads to disturbance of ecosystem and overload of water treatment processes. Therefore, phosphorus(P), source of algal blooms, should be controlled. In this study, a filtration trench has been developed to convert dissolved phosphorus into hydroxyapatite(HAP) so that it could be crystallized on the surface of 'phosphorus removal granular material'; and residual particulate phosphorus could be removed by additional precipitation and filtration. The front and rear parts of filtration trench consisted of 'phosphorus removal granular material contact bed' and 'limestone filtration bed', respectively. As a result of the column test using phosphorus removal granular material and limestone serially, $PO_4-P$ was removed more than 90% when EBCT(empty bed contact time) of the contact bed was over 20 minutes; and T-P represented 60% of removal efficiency when total EBCT was over 1.5 hours. The results of column tests to figure out the sedimentation characteristics showed that more than 90% of particulate phosphorus could be removed within 24 hours. It was necessary to optimize the filtration part in order to increase removal efficiency of T-P additionally. Also, it was confirmed through the simulation of Visual MINTEQ that most of particulate phosphorus in the column tests is the form of HAP. Based on the results of the study, it could be suggested that the design parameters are over 0.5 hour of EBCT for phosphorus removal granular material contact bed and over 1.5 hours of EBCT for limestone filtration bed.

활성탄 공정과 생물여과 공정에서의 자연유기물질 제거특성 (Removal Characteristics of Natural Organic Matters in Activated Carbon and Biofiltration Process)

  • 손희종;최근주;김상구
    • 대한환경공학회지
    • /
    • 제29권2호
    • /
    • pp.205-213
    • /
    • 2007
  • 입상활성탄 및 생물여과 공정에서 활성탄 종류별 DOC(dissolved organic carbon) 흡착능은 석탄계가 가장 우수한 것으로 나타났고, 다음으로 야자계, 목탄계 순으로 조사되었으며, 활성탄 종류별 부착 미생물의 생체량과 활성도는 석탄계에서 가장 높게 나타났으며, 다음으로 목탄계, 야자계, 안트라사이트 순으로 나타났다. 안트라사이트를 이용한 생물여과 공정에서 OM(natural organic matters)의 생분해율은 15분 이상의 EBCT(empty bed contact time)가 주어져야 bed volume에 따라 평균 $10\sim17%$, 최대 $18\sim24%$ 정도의 생분해율을 얻을 수 있었다. NOM의 활성탄 흡착은 주로 친수성 보다 소수성 유기물질과 10,000 Da 이하의 유기물질의 제거가 용이하였으며 HAA5FP(haloacetic acid 5 formation potential) 보다 THMFP(trihalomethane formation potential), BDOC(biodegradable dissolved organic carbon)$_{rapid}$ 보다는 $BDOC_{slow}$의 제거가 용이한 것으로 조사되었다. 생물여과 공정에 의한 유기물질 제거 특성은 주로 친수성과 1,000 Da 이하의 유기물질 제거가 용이하였으며, THMFP 보다는 HAASFP, $BDOC_{slow}$ 보다는 $BDOC_{rapid}$의 제거가 용이한 것으로 조사되었다.

Tobermolite를 이용한 폐수내 인산염제거 (Phosphate Removal in Wastewater by Tobermolite)

  • 임봉수;김대현;이태우
    • 상하수도학회지
    • /
    • 제27권6호
    • /
    • pp.751-759
    • /
    • 2013
  • This study is carried out to get the basic design parameters for phospate removal facilites from wastewater by Tobermolite. The phosphate removal by the apatite formation on the surface was affected by several important factors, temperature, ions present in wastewater stream, contact time, recirculation rate, and etc. In case of the temperature, with the increase of temperature, the apatite formation was accelerated. When temperature increased from $15^{\circ}C$ to $35^{\circ}C$, removal efficiency of phosphate increased from 83 % to 93 %. An increase of calcium and fluoride ion content increase the apatite formation, however, bicarbonate and magnesium ion inhibited the crystallization of apatite. As expected, when the recirculation rate was increased from 1 Q to 3 Q, at EBCT (Empty Bed Contact Time) 60min enhanced removal efficiency was observed. The more the recirculation rate increased, the more the removal efficiency increased. According to the results of column experiment using an actual wastewater with low and high phosphate concentration (5 mg/L and 50 mg/L-P), the removal efficiency was 77 % at EBCT of 45 min, and 80 % at 60 min. It was suggested that optimum EBCT was 45 min.

BAF를 이용한 하수의 3차 처리 및 by-pass된 우수의 처리 (Tertiary Treatment of Municipal Wastewater and Bypassed Rainfall Treatment using by BAF)

  • 이광제;박재홍
    • 한국물환경학회지
    • /
    • 제21권4호
    • /
    • pp.327-331
    • /
    • 2005
  • The study was conducted with two laboratory biological aerated filter (BAF) reactors: denitrification filter (DF) and nitrification BAF. The influent flow (Q) was fixed to 48 L/d and total empty bed contact time (EBCT) was 1 hr. The flow direction was upflow with NRCY of 1 to 2Q. The secondary effluent was fed to the reactors and the influent concentrations were adjusted with some stock solutions to simulate by-pass concentration during rainfall. The study results indicate that COD and SS removal efficiencies were excellent and not influenced by temperature. Nitrification efficiency was over 90% at the influent loading less than $1.12kg/media\;m^3/d$, but the efficiencies were decreased in low temperature. TN removal efficiencies were 10% to 60%.

정수용 입상활성탄상의 세균 (Bacteria on Granular Activated Carbon for Tap Water Purifier)

  • 이동근;하종명;이재화
    • 생명과학회지
    • /
    • 제14권1호
    • /
    • pp.163-166
    • /
    • 2004
  • 정수용 입상활성탄(Granular Activated Carbon, GAC)에서 발생하는 세균 생장 현상을 파악하기 위해 활성탄 칼럼을 제작하고, 수돗물을 고정식 상향류 방식으로 (EBCT = 0.92~1분) 통수시켰다. 봄에는 14일 동안 세균수의 파과(breakthrough) 현상이 없었다. 여름에는 야자계와 석탄계 활성탄 칼럼의 유출 세균수는 비슷하여 파과전에 $10^2$ CFU/ ml수준으로 유입수보다 낮았지만, 10일 이후 유출수가 $10^3$ CFU/ml 로 유입수의 $10^2$ CFU/ml보다 높은 값을 보였다. 칼럼 내부 4지점의 활성탄을 깊이에 따라 분석했을 때 유입수 유입부에 가까울수록 많은 세균수가 관찰되었고 세균군집의 활성은 유사하였다 성장하는 세균은 야자계와 석탄계 활성탄이 서로 달랐지만 Acinetobacter 속이 우점을 이루고 있는 것으로 나타났다.

인제거용 흡착제로서 밀스케일로부터 선별된 마그네타이트 적용 연구 (A study on the application of mill scale-derived magnetite particles for adsorptive removal of phosphate from wastewater)

  • 김윤중;엘라;최영균
    • 상하수도학회지
    • /
    • 제31권4호
    • /
    • pp.281-287
    • /
    • 2017
  • Mill scale, an iron waste, was used to separate magnetite particles for the adsorption of phosphate from aqueous solution. Mill scale has a layered structure composed of wustite (FeO), magnetite ($Fe_3O_4$), and hematite ($Fe_2O_3$). Because magnetite shows the highest magnetic property among these iron oxides, it can be easily separated from the crushed mill scale particles. Several techniques were employed to characterize the separated particles. Mill scale-derived magnetite particles exhibited a strong uptake affinity to phosphate in a wide pH range of 3-7, with the maximum adsorptive removal of 100%, at the dosage of 1 g/L, pH 3-5. Langmuir isotherm model well described the equilibrium data, exhibiting maximum adsorption capacities for phosphate up to 4.95 and 8.79 mg/g at 298 and 308 K, respectively. From continuous operation of the packed-bed column reactor operated with different EBCT (empty bed contact time) and adsorbent particle size, the breakthrough of phosphate started after 8-22 days of operation. After regeneration of the column reactor with 0.1N NaOH solution, 95-98% of adsorbed phosphate could be detached from the column reactor.

BAC 공정에서의 고지혈증 치료제 생물분해 특성 (Biodegradation of Blood Lipid Lower Agents (BLLAs) in Biological Activated Carbon (BAC) Process)

  • 염훈식;손희종;류동춘;유평종
    • 대한환경공학회지
    • /
    • 제39권3호
    • /
    • pp.124-131
    • /
    • 2017
  • 생물활성탄 공정과 안트라사이트를 여재로 사용한 biofilter에서 공탑 체류시간(EBCT)과 수온의 변화에 따른 8종의 고지혈증 치료제류(blood lipid regulator agents, BLLAs)의 생물분해 특성을 평가하였다. 수온 $8^{\circ}C$, $16^{\circ}C$$24^{\circ}C$에서 공탑 체류시간을 5분~15분까지 변화시켰다. 생물활성탄 공정에서 고지혈증 치료제류 8종의 생물분해 제거율은 공탑 체류시간과 수온의 변화에 많은 영향을 받았으며, 공탑 체류시간과 수온이 증가할수록 생분해 제거율이 증가하였다. 고지혈증 치료제류의 종류에 따른 생물활성탄 공정에서 생분해 제거율은 statin계의 경우 simvastatin이 가장 높았으며 다음으로 mevastatin, fluvastatin 및 atorvastatin 순이었다. 또한, Fibrate계 고지혈증 치료제들의 생물분해능은 fenofibrate가 가장 높았으며 다음으로 gemfibrozil, bezafibrate, clofibric acid순이었다. BAC 공정에서 생물분해 제거능이 가장 낮은 clofibric acid와 atorvastatin의 생물분해 속도상수($k_{bio}$)는 수온이 $8^{\circ}C$에서 $24^{\circ}C$로 상승하였을 경우, 각각 $0.0075min^{-1}$$0.0122min^{-1}$에서 $0.0540min^{-1}$$0.0866min^{-1}$으로 증가하여 각각 7.2배 및 7.1배 정도 증가하였다.