• Journal of Ocean Engineering and Technology
• /
• v.27 no.3
• /
• pp.53-60
• /
• 2013

A drillship is a representative floating offshore installation. The boom in oil and gas field development has dramatically increased the demands for drillships. Drillships have a moonpool in the center area of the ship for the purpose of drilling. This moonpool has an effect on the seakeeping performance of a drillship in the vicinity of the resonance frequency. Because of the moonpool, drillships act in different resonance modes, called the sloshing mode and piston mode. The objective of this study was to find the moonpool effect on the motion of a drillship through the motion analysis of a currently operating modern compact drillship. The predicted resonance frequencies based on Molin's theoretical formula, Fukuda's empirical formula, and BEM-based numerical analysis are compared. The accuracy of the predictions using the theoretical and empirical formulas is compared with the numerical analysis and evaluated. In the case of the piston mode, the difference between the resonance frequency from theoretical formula and the resonance frequency from the numerical analysis is analyzed. The resonance frequency formula for more a complex moonpool geometry such as a moonpool with a cofferdam is necessarily emphasized.

• Journal of Families and Better Life
• /
• v.20 no.1
• /
• pp.45-56
• /
• 2002

The main purposes of this article are to introduce the theoretical backgrounds and empirical application methods of two different Models for the function of expenditure, and to compare the goodness-o(-fit of the two models: a single-equation model and a complete-system-of-demand-equation model. For the empirical analysis of the single-equation model, a linear formula and a double-leg formula were employed. In order to test the complete-system-of-demand-equation model empirically, the \"Linear Approximation/Almost Ideal Demand System (LA/AIDS)" was used. The independent variables were the total living expense and expenditure categories Price index. The data used in this study were obtained from the quarterly statistics of "The Annual Report on the Urban Family Income and Expenditure Survey (Dosigagyeyonbo)" and "The Annual Report on the Consumer Price Index (Sobijamulgajaryo)," for the years 1994 to 1997. The goodness-of-fit (R-square) was higher with the complete-system-of-demand-equation model than with the single-equation model for the budget share on food (excluding eating-out expenses) and for the share on cultural and recreational activities. However, there was no difference between the two models in terms of the proportion of the expenditure on automobile fuel.fuel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.163-168
• /
• 2020

Since the industrialization in the 1960s, Korea has been expanding its transportation infrastructure, such as building bridges. Owing to bridge construction, studies on stability review have been carried out, and stability-securing technology has been developed. On the other hand, these were applied mainly to the upper part of the bridge, so applications to the lower part are limited. In particular, scour at the bridge pier causes erosion in the riverbed and bridge collapse. Hence, prevention studies and countermeasures are needed. In this study, an empirical formula was developed to evaluate the scour depth of a bridge, which was calculated through multiple linear regression analysis using the hydraulic model study data conducted in previous studies. The formula, which had a value of 0.91, was applied to the model test data that was not used for development to verify the developed formula. When the pier scour depths were compared in 23 cases, the error rate was less than 20% in 16 cases (70%). The empirical formula developed in this study is applicable to pier scour-depth calculations. Further research will be needed to develop a more accurate empirical formula for pier scour-depth calculations, and it is expected to reduce bridge damage caused by scour.

• Nuclear Engineering and Technology
• /
• v.14 no.3
• /
• pp.103-109
• /
• 1982

An empirical formula for determining water content as functions of uranium concentration and nitric acid normalities in uranyl nitrate solutions has been derived from a least-squares analysis of experimental data, i.e., uranium concentration, nitric acid normalities and solution densities for a large number of UO$_2$(NO$_3$)$_2$ solutions. The formula derived is Q=1-0.3628C-0.0327H$^{+}$ where Q, C, and H$^{+}$ stand for water content (g/cc), uranium concentration (g/cc), ana nitric acid normality, respectively. Atom number densities and nuclear criticality for hypothetical uranyl nitrate solutions have been calculated by using the empirical formula, ana compared with the results obtained on the basis of uranium concentration, nitric acid normality, and solution density. The empirical formula derived in this study seems to be useful in uranium concentrations ranging from 0.295g/cc down to 0.004g/cc and nitric acid normality from 5.06 to 1.00..00.

• Steel and Composite Structures
• /
• v.18 no.2
• /
• pp.497-517
• /
• 2015

This study evaluates behavior of the Y-type perfobond rib shear connector proposed by Kim et al. (2013). In addition, an empirical shear resistance formula is developed based on push-out tests. Various types of the proposed Y-type perfobond rib shear connectors are examined to evaluate the effects of design variables such as concrete strength, number of transverse rebars, and thickness of rib. It is verified that higher concrete strength increases shear resistance but decreases ductility. Placing transverse rebars significantly increases both the shear resistance and ductility. As the thickness of the ribs increases, the shear resistance increases but the ductility decreases. The experimental results indicate that a Y-type perfobond rib shear connector has higher shear resistance and ductility than the conventional stud shear connector. The effects of the end bearing resistance, resistance by transverse rebars, concrete dowel resistance by holes, and concrete dowel resistance by Y-shape ribs on the shear resistance are estimated empirically based on the push-out test results and the additional push-out test results by Kim et al. (2013). An empirical shear resistance formula is suggested to estimate the shear resistance of a Y-type perfobond shear connector for design purposes. The newly developed shear resistance formula is in reasonable agreement with the experimental results because the average ratio of measured shear resistance to estimated shear resistance is 1.024.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.2
• /
• pp.123-130
• /
• 2018

The present study investigated the validity of an equilibrium shoreline empirical formula for real phenomena. Among three types of equilibrium shoreline formulas, Hsu's parabolic type static formula was employed, which is well-known and the most practical for shoreline estimation after coastal or harbor structure construction. The wave data observed at Maengbang beach and the CERC formula on longshore sediment transport were used in the present investigation. A comparison study was only conducted for the case of a shoreline change after the construction of a groyne. Reasonable agreement was seen between the observed wave data and the data obtained under a wave angle spreading function S = 3.5. However, significant changes were observed when S increased. Thus, careful application is required when using Hsu's formula.

• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.89-103
• /
• 2014

According to experimental studies made so far, design formula of shear characteristics suggested by ISO 22762 and JEAG 4614, representative design code for Lead Rubber Bearing(LRB) shows dependence caused by changes in compressive stress. Especially, in the case of atypical special structure, such as a nuclear power structure, placement of seismic isolation bearing is more limited compared to that of existing structures and design compressive stress is various in sizes. As a result, there is a difference between design factor and real behavior with regards to shear characteristics of base isolation device, depending on compressive stress. In this study, a full-scale low hardness device of LRB, representative base isolation device was manufactured, analyzed, and then evaluated through an experiment on shear characteristics related to various compressive stresses. With design compressive stress of the full-scale LRB (13MPa) being a basis, changes in shear characteristics were analyzed for compressive stress of 5 MPa, 10 MPa, 13 MPa, 15 MPa, and 20 MPa based on characteristics test specified by ISO 22762:2010 and based on the test result, a regression analysis was made to offer an empirical formula. With application of proposed design formula which reflected the existing design formula and empirical formula, trend of horizontal characteristics was analyzed.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.40-49
• /
• 2000

In this paper, an empirical formula to estimate the steering gear torque of a Tanker with a horn type rudder was developed by using the statistical analysis. The hydrodynamic characteristics of the horn type rudder in the free-stream condition were calculated by using the modified lifting line theory by Molland, and the interaction effects by propeller and hull were analyzed by the regression analysis of the sea-trial data of 32 vessels. The comparison with the delivered vessels' data shows that the formula can be used for predicting the steering gear torque at the initial design stage.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.2
• /
• pp.144-152
• /
• 2018

This study aims to establish a mathematical formula to provide rapid and safety estimation of the damaged double hull tankers under ship-ship collision. Difference in heights between the striking and struck ships 'h' and penetration depth 'x' were considered as the main parameters. In ship-ship interaction, Large oil tankers are selected as target struck vessels, and they are struck by Very Large Crude-Oil Carrier (VLCC) class oil tanker. The residual strength of damaged ship at several locations and collision scenarios were carried out using Intelligent Supersize Finite Element Method (ISFEM) which considers the progressive collapse behavior of ship hulls strength. Based on these results, satisfactory was achieved and empirical formula was successfully established using the regression analysis method by deploying the height difference 'h' and penetration depth 'x' as the observed parameters.

• Water for future
• /
• v.14 no.4
• /
• pp.27-34
• /
• 1981

The design flow of the urban strom drainage systems has been assessed largely on a basis of empirical relations between rainfall and runoff, and the rational formula has been widely used for the cities in our country. In order to estimate it more accurately, the urban runoff simulation model based on the RRl method has been developed and applied to the sample basin in this study. The rainfall hyetograph of the design stromfor the design flow has been obtained by the determination of the total rainfall and the temporal distributions of that rainfall. The total rainfall has been assessed from the empirical formula of rainfall intensity and the temporal distribution of that rainfall determined on the basis of Huff's method from the historical rainfall data of the basin. The virtual inflow hydrograph to each inlet of the basin has been constructed by computing the series of discharges in each time increment, using design strom hyetograph and time-area diagram. The actual runoff hydrograph at the basin outlet has been computed from the virtual inflow hydrographs by developing a relations between discharge and storage for the watershed. The discharge data for verification of the simulated runoff hydrograph are not available in the sample basin and so the sensitivity analysis of the simulation model has not been possible. The peak discharge for the design of drainage systems has been estimated from the computed runoff hydrograph at the basin outlet and compared to thatl obtained form the rational formula.