• 천문학회보
• /
• 제37권1호
• /
• pp.92.1-92.1
• /
• 2012

In this work we have examined the performance of the WSA/ENLIL cone model provided by Community Coordinated Modeling Center (CCMC). The WSA/ENLIL model simulates the propagation of coronal mass ejections (CMEs) from the Sun into the heliosphere. We estimate the shock arrival times at the Earth using 29 halo CMEs from 2001 to 2002. These halo CMEs have cone model parameters from Michalek et al. (2007) as well as their associated interplanetary (IP) shocks. We make a comparison between CME arrival times by the WSA/ENLIL cone model and IP shock observations. For the WSA/ENLIL cone model, the root mean square(RMS) error is about 13 hours and the mean absolute error(MAE) is approximately 10.4 hours. We compared these estimates with those of the empirical model by Kim et al.(2007). For the empirical model, the RMS and MAE errors are about 10.2 hours and 8.7 hours, respectively. We are investigating several possibilities on relatively large errors of the WSA/ENLIL cone model, which may be caused by cone model velocities, CME density enhancement factor, or CME-CME interaction.

• 한국포장학회지
• /
• 제26권2호
• /
• pp.85-92
• /
• 2020

In this study, the relationship between packaging design and logistics efficiency raised in prior research was to be conducted through empirical analysis in terms of SCM efficiency. The main research contents were carried out in the pursuit of efficiency of the relevant store operation, relationship with SCM efficiency aspects, resolution of differences in recognition between manufacturers and distributors, establishment of automated systems for RRP production facilities and processes in the manufacturer's facilities, logistics costs, environment and quality safety, and promotion of RRP through the manufacturer's packaging system. As a result of the verification of SCM efficiency aspects through this study, logistics efficiency will be reduced in the case of the packaging system or delivery system, where only the operational efficiency of the store is the top priority(χ² = 178.500, p < 0.001). This is because of the strong interaction between packaging and supply chain activities, many packaging systems affect the performance criteria of the supply chain, and the content that packaging personnel should ensure that the packaging system meets other essential requirements while meeting the primary goal of protecting the product is also a result consistent with the preceding study. An analysis of whether the RRP promotion through the manufacturer's packaging system would result in improved loading efficiency showed that there was a statistically meaningful difference at a significant level of 0.000, as χ² = 140.133.

• 유통과학연구
• /
• 제11권1호
• /
• pp.15-23
• /
• 2013

Purpose - During a reform period lasting 30 years, the Blue Economic Zone (BEZ) in the Shandong Peninsula has made progress in attracting foreign investment, and has acquired the foreign direct investment (FDI) essential for economic growth. It is therefore important to conduct a proactive and systematic study of FDI in the BEZ. Research design, data, methodology - This dissertation discusses the contribution of FDI on economic growth, from both a theoretical and empirical perspective. Taking seven core cities for study, statistics and econometrics are used, and panel data are used to validate FDI contribution to import and export in the BEZ. Results- FDI was found to exert both positive and negative influences on the imports and exports of the BEZ. In other words, the research findings are consistent with Trade Generated and Inverse Trade Generated theories put forward by Kojima and Mundell, among other researchers mentioned earlier in this paper. Further, FDI has greatly increased imports and exports for the BEZ. Conclusions - According to the results of this empirical study on local investment environment optimization, FDI plays an important role in foreign trade. This dissertation puts forward recommendations on using FDI to better promote economic growth in the BEZ.

• 천문학회보
• /
• 제37권2호
• /
• pp.124.1-124.1
• /
• 2012

We have made a comparison of the WSA-ENLIL CME propagation model with three cone types and an empirical model using 29 halo CMEs from 2001 to 2002. These halo CMEs have cone model parameters from Michalek et al. (2007) as well as their associated interplanetary (IP) shocks. For this study we consider three different cone models (an asymmetric cone model, an ice-cream cone model and an elliptical cone model) to determine CME cone parameters (radial velocity, angular width and source location), which are used for input parameters of the WSA-ENLIL CME propagation model. The mean absolute error (MAE) of the arrival times at the Earth for the elliptical cone model is 10 hours, which is about 2 hours smaller than those of the other models. However, this value is still larger than that (8.7 hours) of an empirical model by Kim et al. (2007). We are investigating several possibilities on relatively large errors of the WSA-ENLIL cone model, which may be caused by CME-CME interaction, background solar wind speed, and/or CME density enhancement.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.259-264
• /
• 2006

본 연구는 정기선해운영업을 중심으로 해운산업에서의 전자상거래 활용 및 성과에 영향을 미치는 요인들을 도출한 후, 도출된 영향요인들과 전자상거래 활용수준 및 성과간에 어떠한 인과관계가 있는지를 검증하고자 하였다. 이를 위해 우리나라 해운기업들의 내부환경변수인 해운기업특성과 외부환경변수인 해운환경특성이 전자상거래 활용수준에 어떠한 영향을 미치는지와 우리나라 해운기업들의 전자상거래 활용수준이 전자상거래 활용성과에 어떠한 영향을 미치는지의 2단계 연구모형을 구조방정식모델을 통해 실증분석하였다.

• 한국추진공학회지
• /
• 제23권1호
• /
• pp.93-100
• /
• 2019

터보펌프 인듀서에서 발생하는 캐비테이션은 시작점부터 점차 발달하여 임계점, 그리고 급격한 양정 하락으로 이어지는 붕괴점의 과정으로 진행된다. 본 연구에서는 터보펌프 인듀서에서 발생하는 캐비테이션 시작점에 대한 특성과 경험식을 사용한 예측을 평가해 보았다. 타원 평판의 캐비테이션 시작점 경험식은 터보펌프 인듀서의 시작점도 비교적 잘 예측하는 것으로 나타났다. 하지만, 선박용 프로펠러에서 이용되는 경험식의 경우 터보펌프 인듀서의 결과와 큰 차이를 보였다. 터보펌프 인듀서의 캐비테이션 시작점은 날개 수가 증가할수록 빨라졌지만, 현절비와는 무관한 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제30권4호
• /
• pp.393-399
• /
• 2022

The Segregation Potential (SP) is one of the most widely used predictors of frost heave in cold regions. Laboratory step-freezing tests determining a representative SP at the onset of the formation of the last ice lens (near the thermal steady state condition) can predict susceptibility to frost heave. Previous work has proposed empirical semi-log fitting for determination of the representative SP and applied it to several fine-grained soils, but considering only frost-susceptible soils. The presence of fines in coarse-grained soil affects frost susceptibility. Therefore, it is required to evaluate the applicability of the empirical semi-log fitting for both frost-susceptible and non-frost-susceptible soils with fines content. This paper reports laboratory frost heave tests for fines contents of 5%-70%. The frost susceptibility of soil mixtures composed of sand and silt was classified by the representative SP, and the suitability of the empirical semi-log fitting method was assessed. Combining semi-log fitting with simple laboratory frost heave testing using a temperature-controllable cell is shown to be suitable for both frost-susceptible and non-frost-susceptible soils. In addition, initially non-frost-susceptible soil became frost susceptible at a 10%-20% weight fraction of fines. This threshold fines content matched well with transitions in the engineering characteristics of both the unfrozen and frozen soil mixtures.

• 한국재료학회지
• /
• 제31권5호
• /
• pp.255-263
• /
• 2021

P91 steel has been a highly researched material because of its applicability for high-temperature applications. Considerable efforts have been made to produce experimental creep data and develop models for creep life prediction. As creep tests are expensive and difficult to conduct, it is vital to develop authenticated empirical methods from experimental results that can be utilized for better understanding of creep behavior and can be incorporated into computational models for reliable prediction of creep life. In this research, a series of creep rupture tests are performed on the P91 specimens within a stress range of 155 MPa to 200 MPa and temperature range of 640 ℃ (913 K) to 675 ℃ (948 K). The microstructure, hardness, and fracture surfaces of the specimens are investigated. To analyze the results of the creep rupture tests at a macro level, a parameter called creep work density is derived. Then, the relationships between various creep parameters such as strain, strain rate, time to rupture, creep damage tolerance factor, and creep work density are investigated, and various empirical equations are obtained.

• 아태비즈니스연구
• /
• 제12권4호
• /
• pp.313-329
• /
• 2021

Purpose - Digital trade, which started in the early 2000s, is showing a sharp increase due to the recent pandemic. However, despite this proliferation, users' acceptance of innovation is very slow. Cloud services are at the center of digital trade activation. This study aims to contribute to the spread of digital trade through empirical analysis of the resistance factors that hinder the use of cloud service-based digital trade using the innovation resistance theory and the status quo bias theory. Design/Methodology/Approach - In order to achieve the research purpose, this study was conducted with 171 entrepreneurs using cloud service-based digital trade. Structural equation model(SEM) was used through empirical analysis. Findings - As a result of the study, it was found that the complexity of technology, perceived risk, compatibility, and trust in service providers had a significant effect on innovation resistance, and policy trust did not affect innovation resistance. Also, security concerns and institutional trust were analyzed to have a significant effect on the trust of service providers. Research Implications - This study is meaningful to help the rapid diffusion of innovative technologies through empirical analysis of factors that lower the intention to accept cloud service-based digital trade.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.573-594
• /
• 2024

This article presents a research study, with both laboratory and field tests, of a deep foundation in a markedly anisotropic medium. Particularly it has focused on the evaluation of the behavior of a pile, one meter in diameter, embedded in a rocky environment with difficult conditions, in the Flysch of the Spanish city of San Sebastián. To carry out the research, the site of a bridge over the Urumea River was chosen, which was supported by pre-excavated reinforced concrete piles. 4 borings were carried out, by the rotation and washing method, with continuous sampling and combined with flexible dilatometer tests. In the field, an Osterberg load test (O-cell) was performed, while in the laboratory, determinations of natural moisture, natural unit weight, uniaxial compressive strength (UCS), point load strength (PLS), compressive wave propagation velocity (V_c) and also triaxial and direct shear tests were carried out. The research results indicate the following: a) the empirical functions that correlate the UCS with the PLS are not always linear; b) for the studied Flysch it is possible to obtain empirical functions that correlate the UCS with the PLS and with the V_c; c) the bearing capacity of the studied Flysch is much greater than if it is evaluated by different load capacity theories; d) it is possible to propose an empirical function that allows evaluating the mobilized shear strength (τ_m), as a function of the UCS and the displacement relative of the pile (δ_r).