• 수산해양기술연구
• /
• 제56권4호
• /
• pp.374-383
• /
• 2020

At ship design stage, the maneuverability is generally estimated based on the empirical formula or the computational fluid dynamic (CFD), which is one of the numerical simulation methods. Using the hydrodynamic derivatives derived through these methods can quantitatively estimate the maneuverability of target vessels and evaluate indirect maneuverability. Nevertheless, research on estimating maneuverability is insufficient for ships not subject to IMO maneuverability standard, especially fishing vessels, and even at the design stage, the empirical formula developed for merchant ships is applied without modification. An estimation error may occur due to the empirical formula derived from the regression analysis results of a model test if the empirical formula developed for merchant ships with different hull shapes is applied to fishing vessels without any modification. In this study, the modified empirical formula that can more accurately estimate the fishing vessel's maneuverability was derived by including the hull shape parameter of target fishing trawlers in the regression analysis process that derives Kijima et al. (1990) formula. As a result, the modified empirical formula showed an average estimation error of 6%, and the result improved the average error of 49% of Kijima et al. (1990) formula developed for merchant ships.

• Steel and Composite Structures
• /
• 제33권2호
• /
• pp.181-194
• /
• 2019

This paper presents an efficient approach to generate a new empirical formula to predict the axial compression capacity (ACC) of circular concrete-filled tube (CCFT) columns using the artificial neural network (ANN). A total of 258 test results extracted from the literature were used to develop the ANN models. The ANN model having the highest correlation coefficient (R) and the lowest mean square error (MSE) was determined as the best model. Stability analysis, sensitivity analysis, and a parametric study were carried out to estimate the stability of the ANN model and to investigate the main contributing factors on the ACC of CCFT columns. Stability analysis revealed that the ANN model was more stable than several existing formulae. Whereas, the sensitivity analysis and parametric study showed that the outer diameter of the steel tube was the most sensitive parameter. Additionally, using the validated ANN model, a new empirical formula was derived for predicting the ACC of CCFT columns. Obviously, a higher accuracy of the proposed empirical formula was achieved compared to the existing formulae.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.439-445
• /
• 2017

Plunging breaker slamming pressures on vertical or sloping sea dikes are one of the most severe and dangerous loads that sea dike structures can suffer. Many studies have investigated the impact forces caused by breaking waves for maritime structures including sea dikes and most predictions of the breaker forces are based on empirical or semi-empirical formulae calibrated from laboratory experiments. However, the wave breaking mechanism is complex and more research efforts are still needed to improve the accuracy in predicting breaker forces. This study proposes a semi-empirical formula, which is based on impulse-momentum relation, to calculate the slamming pressure due to plunging wave breaking on a sloping sea dike. Compared with some measured slamming pressure data in two literature, the calculation results by the new formula show reasonable agreements. Also, by analysing probability distribution function of wave heights, the proposed formula can be converted into a probabilistic expression form for convenience only.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.126-135
• /
• 2021

Wave energy is one of the most available sources of renewable energy in the world. It has been previously proven that the flapping foil can generate thrust forces using energy from the surface waves and an empirical formula was proposed to predict the thrust forces generated by a flapping foil consist of NACA0015 section (Kumar and Shin, 2019a). However, the proposed empirical formula was restricted to the head waves i.e. 0° azimuth angle which was not useful for the flapping foils encountering with oblique and following waves. Therefore, in this study, the thrust empirical formula was modified to include the effects of azimuth angles based on the experimentally obtained data. And the modified empirical equations were validated by the combination of foils experimentally.

• 한국철도학회논문집
• /
• 제12권3호
• /
• pp.357-363
• /
• 2009

본 논문에서는 도시철도 운행으로 발생하는 지반진동의 예측을 위하여 서울지하철 현장 계측을 실시하였다. 현장 계측 결과와 뉴욕지하철의 예측식과 동경지하철의 예측식으로 산정된 값과 비교한 결과, 국내 지반의 지반진동레벨은 뉴욕지하철의 예측식보다 크게 산정되었으며, 동경지하철의 예측식보다는 다소 작게 산정되었다. 또한, 계측현장 지반의 전파경로에 따라 토사지반과 암반지반으로 구분하여 국내 지반특성에 적합한 지반진동 예측식을 제안하였다.

• 수산해양기술연구
• /
• 제57권3호
• /
• pp.246-255
• /
• 2021

Most fishing vessels are less than 100 m in length (LBP), which is not mandatory for the IMO standards for ship maneuverability. Therefore, research on estimating the maneuverability of fishing vessel hull shapes are somewhat lacking compared to that of merchant ship hull shapes, and at the design stage, the numerical simulation method developed for merchant ships are applied without modification to estimate the maneuverability. Since this can cause estimation errors, the authors have derived a modified empirical formula that can improve the accuracy of estimating the maneuverability of fishing vessels in a previous study. In this study, using the modified empirical formula, the IMO maneuverability evaluation items, the turning motion test and Z-test simulations were performed on the fisheries training vessel BAEK-KYUNG and compared with the sea trial test result to verify the validity of the modified empirical formula. In conclusion, the modified empirical formula was able to estimate quantitatively and qualitatively similar to the result of the sea trial test. Such a study on estimating the maneuverability of fishing vessels will be a good indicator for fishing vessel operators and will help them analyze marine accidents.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1475-1484
• /
• 1997

A new empirical formula for instantaneous heat transfer coefficients was determined. The determination of this formula is in need for prediction of instantaneous value of heat transfer coefficients to analyze in more detail the time variation of heat transfer rate from gas to wall in combustion chamber of a spark ignition engine. As the result, following formula was determined. h=687 $p^{0.75}$ $U^{0.75}$ $D^{0.25}$ - $T^{-0.465}$ U(.theta.)=O.494 $V_{p}$ +0.73*10$^{6}$ (1.35 p dV/d.theta.+V dp/d.theta.) Using this empirical formula, the instantaneous heat transfer coefficients of gas in the combustion chamber of spark ignition engine was predicted and compared with experimental values.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.477-480
• /
• 2008

Hydraulic experiment was executed to identify the souring range of bride pier. The experiment categorized three kind of bridge pier shape, that is composed of circle shape, square shape and the special shape. Measured scouring data was compared with the results by empirical CSU formula which was generally used in practice. As empirical formula could not consider backfill, measured scouring range is by far smaller than results of CSU formula. Therefore in case of design anti-scouring structure, there is the possibility of overestimation in case of using empirical formula.

• 문화기술의 융합
• /
• 제8권4호
• /
• pp.407-413
• /
• 2022

본 연구에서는 약 3년간의 장기계측을 바탕으로 공용중인 복층 교량인 상부 도로교의 신축이음 신축량과 하부 철도교의 케이블 장력 간의 상관관계를 입증함으로서 온도변화에 따른 케이블 장력 평가 경험식을 제안하였다. 본 연구에서 제안한 케이블별 장력 평가 경험식을 이용한 장력 예측결과는 진동법을 이용한 장력과 3% 이내로 잘 일치하는 것으로 나타나 공용중인 케이블의 장력 예측 및 평가에 실험적인 기법인 진동법과 함께 적용이 가능할 것으로 판단되었다. 본 연구에서 제안한 신축량 경험식으로 산출한 추정온도를 케이블 경험식에 적용한 결과, 현장시험 진동법 측정결과와 비교시 높은 신뢰수준을 확보할 수 있을 것으로 분석되었다. 따라서 본 연구에서 제안한 추정온도를 반영한 장력 평가 경험식은 향후 기후변화에 따른 케이블의 장력 예측 및 유지관리방안 수립에 활용될 수 있을 것으로 판단된다.

• 한국물환경학회지
• /
• 제30권1호
• /
• pp.87-94
• /
• 2014

According to the technical guideline of water pollutant load management, the rainfall captured ratio which can be estimated by the empirical formula is an important element to estimate reduction loads of non-point pollutants water quality control basin. In this study, the rainfall captured ratio is altered to stormwater captured ratio considering its meaning in the technical guideline of water pollutant load management, and the new empircal formula of stormwater captured ratio is suggested. In order to do this, we calculate stormwater captured ratio by using the hourly rainfall data of seven urban weather stations (Busan, Daegu, Daejeon, Gangreung, Seoul, Gwangju, and Jeju) for 43 years. The regression coefficients of the existed empirical formula cannot reflect the catchment properties at all, because they are fixed values regardless of regions. However the empirical formula of stormwater captured ratio has flexible regression coefficients by runoff coefficient(C), so it is allowed to consider the characteristics of runoff in catchment. It is expected that reduction loads of storage based water quality control basin can be more reasonably estimated than before.