• 공업화학
• /
• 제3권2호
• /
• pp.207-212
• /
• 1992

Main disposal technology for industrial wasites in Korea has been landfilling, however, this is encountering serious problems such as the lack of landfill sites and objections of residents. Incineration, therefore, has become a final solution for this dilema. Various kinds of air pollutants generation are possible because of the variety of types and compositions of wastes generated in industry. In this paper, air pollutants produced while incinerating hazardous industrial wastes are discussed and some control technologies are surveryed with the purpose of optimal design of incinerators and emission reduction. From this initial stage of incinerator utilization, low-emission type should be developed and applied and intensive research on pollutant generation due to waste incineration and advanced control technologies should be also performed.

• 대한환경공학회지
• /
• 제38권1호
• /
• pp.14-24
• /
• 2016

업종별 수질오염물질 배출 목록은 산업폐수 배출시설을 인허가할 때, 해당 시설 또는 업종에서 관리해야 하는 배출 가능한 수질오염물질을 정확히 검토하기 위함은 물론이고, 오염방지시설의 설계에도 필수적인 가장 기초적인 자료이다. 본 연구에서는 우리나라 폐수배출시설 3개 업종을 대상으로 수질오염물질 배출목록을 작성하기 위하여 해당 사업장의 일반현황 및 처리시설 운영 등에 대한 기초자료 수집과 해당 사업장에서 배출하고 있는 산업폐수중 특정수질유해물질을 비롯한 수질오염물질에 대한 수질 분석을 수행하였다. 본 연구의 조사대상 업종별 수질오염물질 배출목록을 확정하기 위해서 정상적인 시설운영 과정에서 해당물질이 폐수중으로 실제 배출될 수 있는 개연성을 확인하였다. 이를 위해, 먼저 원폐수 및 최종 배출수의 시료 분석에서 검출된 모든 수질오염물질을 평가대상으로 하고, 검출되지 않은 물질은 대상에서 제외한다. 다음으로 이들 평가대상 수질오염물질에 대하여 제조공정상에서 사용하는 각종 원료, 부원료, 불순물 등에서 포함될 가능성을 확인하고, 여기에서 확인될 경우 수질오염물질 배출목록으로 확정한다. 본 연구에서는 3개 업종을 대상으로 하였으며, 석유화학계 기초화합물 제조시설은 조사대상 물질 42종 중 특정수질유해물질 16종을 포함한 31종, 기타 기초유기화합물 제조시설은 특정수질유해물질 14종을 포함한 30종, 화력발전시설은 특정수질유해물질 8종을 포함한 20종의 수질오염물질이 배출목록으로 확정되었다. 본 연구에서는 수질분석과 개연성 평가를 통해 보다 객관적이고 타당성 있는 업종별 수질오염물질 배출목록을 작성하였다.

• 한국대기환경학회지
• /
• 제34권2호
• /
• pp.191-206
• /
• 2018

In this study, the HAPs(Harzard Air Pollutants) emission factor level of Starex and Grand Carnival was tested using PEMS (Portable Emissions Measurement System) on real road driving. As a result of RDE (Real Driving Emission test), the overall vehicle speed pattern showed similar characteristics. The real-road driving test at constant speed revealed emission factor is inversely proportional relationship to constant speed. Results of accelerating with speed limit on the real-road were shown as followings; Uran (less than 45 km/h)>Rural (<45 km/h, less than 80 km/h)>Motorway (>80 km/h). Moreover, the sudden acceleration and deceleration in driving at high speed was the increasing factor to the HAPs emission factor. This tendency is considered to be influenced by the operating environment on real roads.

• 대한환경공학회지
• /
• 제22권10호
• /
• pp.1921-1932
• /
• 2000

• 한국안전학회지
• /
• 제11권2호
• /
• pp.102-108
• /
• 1996

Urban air pollution has been gradually increasing by the increase of population and vehicles recently. There are shown larger effects of air pollution in Incheon city which has more than 2 million people and has heavy holding amounts ratio of transportation vehicles as compared with other cities. However, it is very difficult to predict the air quality condition of their moving pollutants. Therefore, in this study air pollution measuring model was designed to estimate the air pollution level by line sources(transprtation vehicles ) of air pollutants and to detect the $NO_x$ emission amounts in ordinary times, and it became clear that it is functionally operative.

• 한국대기환경학회지
• /
• 제28권5호
• /
• pp.527-537
• /
• 2012

The increasing consumption of pseudo-petroleum products (PPP) has been disturbing the national petroleum market. The use of PPP lead to tax evasion, disturbance of sound trading principles, component corrosion of cars, and explosion accident. Also, PPP have emitted hazardous air pollutants (HAP) including the carcinogenic aromatic hydrocarbons, PAHs and aldehydes more than regular-petroleum products. It thus has potentials to cause many environmental and health care problems. In this study, benzene, toluene and xylene emissions from road transport vehicles due to the use of pseudo-gasoline are estimated for the year 2008. The results of our study provide emission estimates of benzene, toluene and xylene for the year as 405, 1,711, 717 tonne/yr, respectively for regular-gasoline. BTX emissions are calculated as 452~515, 1,882~2,264 and 732~752 tonne/yr when the amount of pseudo-gasoline is estimated to account for 6~13% for regular-gasoline consumption. BTX emissions increased as much as 12~27, 10~32, 2~5% by using pseudo-gasoline. It is found that the pseudo-gasoline should be the key component to produce HAP in urban area.

• 한국멀티미디어학회논문지
• /
• 제16권12호
• /
• pp.1465-1474
• /
• 2013

In this paper, air pollutant tracing models using perceptron neural network(PNN) and non-negative least square(NNLS) are proposed. When the measured values of the air pollution and the contribution concentration of each source by chemical transport modeling are given, they estimate and trace the amount of the air pollutants emission from each source. Two kinds of emissions data are used in the experiments : CH4 and N2O of Geumgo-dong landfill greenhouse gas, and PM10 of 17 areas in Northeast Asia and eight regions of the Korean Peninsula. Emission values were calculated using pseudo inverse method, PNN and NNLS. Pseudo inverse method could be used for the model, but it may have negative emission values. In order to deal with the problem, we used the PNN and NNLS methods. As a result, the estimation using the NNLS is closer to the measured values than that using PNN. The proposed tracing models have better utilization and generalization than those of conventional pseudo inverse model. It could be used more efficiently for air quality management and air pollution reduction.

• 환경위생공학
• /
• 제24권3호
• /
• pp.28-36
• /
• 2009

We have closely examined the concentration change characteristics, emission amounts, and the material balance of hazardous air pollutants at both early and later stages of the prevention facilities. These results will be uses as the basic data when preparing for the regulatory and management plans for hazardous air pollutants. The results of the study on heavy metals illustrated that the content of heavy metals in sludge across five facilities were as follows: copper> zinc> chrome> nickel> cadmium> mercury. In terms of heavy metal content in swage sludge, the sludge in incinerating facilities other than the sludge in the D incinerating facility containing industrial water waste, was examined in order to satisfy the ocean contamination standard and fertilizer specifications. Most of the items were shown to have satisfied the emission tolerance standards in the latter part of the prevention facilities(The average elimination rate was over 90%). Therefore, it is concluded that swage sludge containing high-concentrate heavy metals needs to be incinerated rather than recycled as fertilizer.

• 한국환경과학회지
• /
• 제5권6호
• /
• pp.699-712
• /
• 1996

For the efficient control of atmospheric quality, it is so important to predict the influence accurately of which the air pollutant emitted into the atmosphere. Atmospheric dispersion model enables to simulate and grasp the atmospheric condition occurred due to the emission of pollutants. The result of model is largely affected by the amount of emission, the characteristics of physical and chemical process, meteorological input data, and the receptor which the concentration is calculated. The aim of this research, therefore, is to suggest more suitable model in Pusan area than other areas by performing TCM2, CDM2.0 and ISCLT2 models. As the basic work for executing the model, we computed the amount of emission of air pollutants in Pusan at 1992 and analyzed the occurrence frequency of atmospheric stability for recent decade(1985~19941, CDM2.0 showed the similar result relatively with observed value in the case of full year(1992), fall and winter, and ISCLT2 brought more suitable result in spring for Pusan area. As the result of this research, in future, it is necessary for us to develop the numerical model considering the topographical characteristics, to select the proper observation site and to increase the observation site for Pusan.

• 한국대기환경학회지
• /
• 제1권1호
• /
• pp.83-92
• /
• 1985

In odrder to survey the emission level of air pollutants from diesel vehicles, was measured CO, HC, NOx and smoke of 4 types of domestic-use diesel engines under various conditions. The emission of CO, HC and NOx tested by 6-Mode test method and smoke emission by full load test met the permissible vehicle emission standard. Pollutant emission rates of diesel engines were different according to engine operating conditions, that is, engine load and engine speed. Generally, CO and HC was emitted more at low load and NOx at high load but the trend was quite different by the type of engines. In exhaust gas, $NO_2$ portion of NOx emission was high, specially at low speed and low load. The correlation equation between CLD(NOx) and NDIR(NO) method of nitrogen of nitrogen oxides analysis was y = 1.10x - 3.48 (y: CLD method) as a result of 6-mode test.