• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.90-101
• /
• 2009

An objective of this study is to suggest a procedure to evaluate vehicle emissions regardless of the driving pattern. Field experiments using portable emission measurement system were conducted under the real world driving cycle. Standardized average for NOx, $CO_2$ emission and fuel consumption rates were calculated while the vehicle specific power distribution within each vehicle speed bin was taken into consideration. Composite emission factor and fuel economy, which were obtained based on the standardized average results and traffic statistics, showed good similarity to those acquired through the conventional chassis dynamometer tests qualitatively as well as quantitatively. Considering that a conventional method obviously has a limitation to reflect various characteristics of the real world, the new approach suggested in this study can be used as an alternative procedure to collect more specific data to establish the mobile emission factors.

• 드라이브 ㆍ 컨트롤
• /
• 제20권3호
• /
• pp.15-24
• /
• 2023

The aim of this study was to measure and evaluate the exhaust emission factors of agricultural tractors. Engine characteristics and three exhaust emissions (CO, NO_x, PM) were collected under actual agricultural operating conditions. Experiments were performed on idling, driving, plow tillage, and rotary tillage. The load factor (LF) was calculated using the collected engine data, and the emission factor was analyzed using the LF and exhaust emissions. The engine characteristics and exhaust emissions were significantly different for each working condition, and in particular, the LF was significantly different from the currently applied 0.48 LF. The data distribution of exhaust emissions was different depending on the engine speed. In some conditions, the emission factor was higher than the exhaust emission standards. However, since most emission limit standards are values calculated using an engine dynamometer, even if the emission factor measured under actual working conditions is higher, it cannot be regarded as wrong. It is expected that the results of this study can be used for the inventory construction of a calculation for domestic agricultural machinery emissions in the future.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.209-209
• /
• 2022

Reservoirs play a key role in the carbon cycle between terrestrial and marine systems and are pathways that release greenhouse gases(GHGs), CO₂, CH₄, and N₂O, into the atmosphere by decomposing organic matters. Developed countries have been actively conducting research on carbon emission assessment of dam reservoirs for over 10 years under the leadership of UNESCO/IHA, but associated research is very rare in Korea. In particular, the GHGs footprint evaluation, which calculates the change in net carbon emission considering the watershed environment between pre- and post- impoundment, is very important in evaluating the carbon emission of hydroelectric dams. The objective of this study was to estimate the GHG emissions and footprints in Daecheong Reservoir using the G-res Tool, an online platform developed by UNESCO/IHA. The G-res Tool estimates CO₂ and CH₄ emissions in consideration of diverse pathway fluxes of GHGs from the reservoir and characterizes changes in GHG fluxes over 100 years based on the expected lifetime of the dam. The input required to use the G-res Tool include data related to watersheds, reservoirs, and dams, and most were collected through the government's public portal. As a result of the study, the GHG footprint of Daecheong Reservoir was estimated to be 93 gCO₂eq/m²/yr, which is similar to that of other reservoirs around the world in the same climate zone. After impoundment, the CH₄ diffusion emission from the reservoir was 73 gCO₂eq/m²/yr, also similar to those of the overseas reservoirs, but the CH₄ bubbling emission, degassing emission, and CO₂ diffusion emissions were 44, 34, 252 gCO₂eq/m²/yr, respectively, showing a rather high tendency. Since the dam reservoir carbon footprint evaluation is essential for the Clean Development Mechanism evaluation of hydroelectric power generation, continuous research is needed in the future. In particular, experimental studies that can replace the emission factors obtained from the overseas dam reservoirs currently used in the G-res Tool should be promoted.

• 환경영향평가
• /
• 제24권5호
• /
• pp.456-471
• /
• 2015

배출량 자료는 대기질 수치모의에 있어서 큰 영향을 주는 요소로서 정확한 대기질 수치모의를 위해서 배출량 자료의 정확성과 신뢰도 향상은 대기질 모델 연구에 있어 필수적이다. 본 연구에서는 울산지역을 대상으로 2003년과 2010년 CAPSS 배출량 자료인 CAPSS-2003과 CAPSS-2010를 입력자료로 하여 WRF-CMAQ 모델을 수행하여 울산지역 배출량 지료의 타당성을 검토하였다. 우선 오염물질의 장거리 수송 영향을 배제하기 위하여 울산지역 자체 내의 배출량 영향이 우세한 종관 기상조건을 가진 사례일을 선정하고 선정된 사례일에 대해서 WRF-CMAQ모델을 수행한 후 그 결과인 CO, $NO_2$, $SO_2$, $PM_{10}$ 농도와 관측 값을 비교하여, 과소 혹은 과대 모의되는 정도를 분석하여 모의결과를 보정 할 수 있는 'scaling factor'를 제시하였다. 그 결과 CAPSS-2003을 이용한 모의결과는 CO와 $NO_2$에 대해서는 관측과 유사한 수준으로 모의하였으나 $SO_2$는 약 12배 과대모의, $PM_{10}$은 약 27배나 과소모의하는 결과를 얻었다. 반면 CAPSS-2010을 이용한 모의결과에서는 CO와 $NO_2$의 모의결과는 유사하였으며, $SO_2$는 약 2배 과대모의, $PM_{10}$은 약 5배 과소모의 하여 $SO_2$와 $PM_{10}$ 배출량이 상당히 개선됨을 확인하였다. $SO_2$와 $PM_{10}$ 역시 이전 보다는 관측에 가깝게 모의되었으나 현실적 모델링 결과를 도출하기 위해서 배출량은 향후 개선되어야 할 부분으로 판단되었다. 따라서 보다 현실적인 모델링 결과를 도출하기 위해서는 본 연구에서 제시한 울산지역 배출량의 'scaling factor'를 이용하면 보다 안정된 모델링 결과가 도출 될 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.863-868
• /
• 2004

Reheating furnace is an essential facility of a rod mill plant where a billet is heated to the required rolling temperature so that it can be milled to produce wire. Sometimes, it is also necessary to control a transient billet temperature pattern according to the material characteristics to prevent a wire from breaking. Though it is very important objective to obtain a correct information of a billet temperature during furnace operation. Consequently, a billet temperature profile must be estimated. In this paper, a billet heat transfer model based on FEM (Finite Element Method) with spatially distributed emission factors is proposed and a measurement is also carried out for two different furnace operation conditions. Finally, the difference between the model outputs and the measurements is minimized by using the new optimization algorithm named uDEAS(Univariate Dynamic Encoding Algorithm for Searches) with multi-step tuning strategy. Hence, the information of billet temperatures can be obtained by using proposed model on various furnace operation conditions.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.830-838
• /
• 2000

The paper addresses an application of molecular dynamics technique for fracture mechanics. Molecular dynamics simulation is an atomistic approach, while typical numerical methods such as finite element methods are macroscopic. Using the potential functions, which express the energy of a molecular system, a virtual specimen with molecules is set up and the trajectory of every molecule can be calculated by Newton's equation of motion. Several three-dimensional models with various types of cracks are considered. The stress intensity factors, the sizes of plastic zone as well as the dislocation emission are sought to be compared with the analytical solutions, which result in good agreement.

• Transactions on Electrical and Electronic Materials
• /
• 제15권6호
• /
• pp.324-327
• /
• 2014

Germanium (Ge) is a promising material for next generation nanoelectronics and multiple junction solar cells. This work investigated the electrical properties in Cu/p-type Ge Schottky diodes, using current-voltage (I-V) measurements. The Schottky barrier heights were 0.66, 0.59, and 0.70 eV from the forward ln(I)-V, Cheung, and Norde methods, respectively. The ideality factors were 1.92 and 1.78 from the forward ln(I)-V method and Cheung method, respectively. Such high ideality factor could be associated with the presence of an interfacial layer and interface states at the Cu/p-Ge interface. The reverse-biased current transport was dominated by the Poole-Frenkel emission rather than the Schottky emission.

• 한국분무공학회지
• /
• 제6권3호
• /
• pp.32-37
• /
• 2001

The characteristics of engine performance with fuel injection system in D.I. diesel engine were studied in this paper. A fuel injection system has an important role in the performance and emission gas in a diesel engine. In this paper, an experimental study has been performed to verify the effect of the performance and the emission gas with the factors such as diameters of an injection nozzle hole, diameters of an injection pipe and injection timing in the fuel injection system. The authors have obtained the results that optimizing the factors of fuel injection system is significant to enhance the performance of the engine system and consumption ratio of fuel, smoke, and NOx.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.726-731
• /
• 2000

This study was experimentally analyzed to improve the performance and to reduce exhaust emissions in a turbochaged D.I. diesel engine of the displacement 9.4L. In generally, the system of intake port, fuel injection and turbocharger are very important factors which have influence on the engine performance and exhaust emission because the properties in the injected fuel depend on the combustion characteristics. The optimum results which is tested as available factors fur better performance and emission are as follows; the swirl ratio is 2.43, compression ratio is 16, combustion bowl is $5^{\circ}$ re-entrant type, nozzle hole diameter is ${\phi}0.28*6$, injection timing is BTDC $13^{\circ}CA$ and turbocharger is GT40 model which are selected compressor A/R 0.58 and turbine A/R 1.19.

• 오토저널
• /
• 제4권2호
• /
• pp.47-57
• /
• 1982

Smoke, Hydrocarbon and Garbon Monoxide emissions of concern in environmental pollution on AVDS-170-2D diesel engine were studied experimentally and past studies on emissions of diesel engine were investigate. Engine speed and load were considered as variable factors influencing the emissions. The test results of a multicylinder, direct injection and turblcharged 4 cycle diesel engine were compared with past studies. Both emission levels of experimental study and past studies were markedly influenced by engine operation factors. The results obtained in this study can be summarized as follows; 1) Smoke intensity is proportional to engine load and varies with engine speed. 2) Hydrocarbon and nitric oxides emissions vary with engine speed and load. 3) Garbon monoxide emission is insensitive to engine speed and varies with engine load.