• 한국환경과학회지
• /
• 제18권5호
• /
• pp.509-515
• /
• 2009

The aim of this study is investigated greenhouse gas emissions of glass industry, and when calculates greenhouse gas emission, using formula(Tier 3) advising in IPCC(Intergovernmental Panel on Climate Change) and using self designed formula(Tier 3+) authors of this study. Studied to propose calculation formula that can compare these two calculation results and apply to domestic. Formula of Tier 3 calculated to theoretical composition of carbonate material, And Formula of Tier 3+ calculated on the basis of chemical substance formation table that get from glass manufacture company(The S company). As a result, Dolomite, Soda ash, Limestone, Industrial Barium carbonate is calculated value of Tier 3+ lower than value of Tier 3, And Industrial Potassium carbonate, Industrial Strontium carbonate was calculated value of Tier 3 lower than value of Tier 3. This study finding, formula of Tier 3+ has higher confidence than formula of Tier 3 when consider revision about purity of injection raw material. And hereafter, When calculate greenhouse gas emissions about nonmetallic mineral industry, use of Tier 3+ is considered that should be encouraged.

• 인간식물환경학회지
• /
• 제24권2호
• /
• pp.195-207
• /
• 2021

Background and objective: While response measures to particulate matters in rural areas are limited due to poor inventory record keeping in the agricultural sector, it is necessary to control agricultural waste vinyl and the emission of precursors released from open burning and the secondary generation of particulate matters. Currently, the open burning emission calculation method uses the definition prescribed in CAPSS by the National Institute of Environmental Research. Methods: This study presented an open burning emission calculation formula for agricultural waste vinyl, which is included as agricultural waste. As for activity data, the open burning ratio of agricultural waste vinyl, and the annual incineration volume provided in the Status Survey by the Ministry of Agriculture, Food, and Rural Affairs were applied. The emission factor was generated through incineration tests on three agricultural plastic film samples collected by the Korea Environment Corporation. Results: Among precursors, SOx and NOx were selected and their emission features were monitored with incineration experiment infrastructure based on the EPA 5G method. The highest emission concentration by agricultural waste type was concentrated in the first and second quarters. As for emission factor of SO₂, it was calculated at 98.25 g/kg for mulching-use LDPE, 52.31 g/kg for greenhouse-use LDPE, and 14.40 g/kg for HDPE. As for NOx, it was calculated at 18.21 g/kg for mulching-use LDPE, 16.49 g/kg for greenhouse-use LDPE, and 10.67 g/kg for HDPE. Conclusion: This test confirmed the incineration features of PE-based plastics, ascertained the SOx emission factor that had not been included in open burning in the past, and established that low NOx emission concentration is interfered by soil mixed with livestock excretions. The findings from this study are expected to contribute to improving the system for controlling air pollutants in rural environments.

• 천문학회지
• /
• 제41권4호
• /
• pp.99-107
• /
• 2008

When a new counting experiment is proposed, it is crucial to predict whether the desired source signal will be detected, or how much observation time is required in order to detect the signal at a certain significance level. The concept of the a priori prediction of the detection limit in a newly proposed experiment should be distinguished from the a posteriori claim or decision whether a source signal was detected in an experiment already performed, and the calculation of statistical significance of a measured source signal. We formulate precise definitions of these concepts based on the statistical theory of hypothesis testing, and derive an approximate formula to estimate quickly the a priori detection limit of expected Poissonian source signals. A more accurate algorithm for calculating the detection limits in a counting experiment is also proposed. The formula and the proposed algorithm may be used for the estimation of required integration or observation time in proposals of new experiments. Applications include the calculation of integration time required for the detection of faint emission lines in a newly proposed spectroscopic observation, and the detection of faint sources in a new imaging observation. We apply the results to the calculation of observation time required to claim the detection of the surface thermal emission from neutron stars with two virtual instruments.

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1147-1154
• /
• 2004

This paper is the third of several companion papers which compare the method of Air-Fuel ratio determination. In the previous works, Eltinge chart was expanded to arbitrary fuel composition as a reference exhaust composition. The compensation of unburned hydrocarbon in Eltinge chart and comparison of Spindt and Eltinge method were also discussed. In addition to Eltinge and Spindt's one, however, there are many methods which calculate Air-Fuel ratio from exhaust emission. Among these methods, carbon balance and oxygen balance are widely used in practice. In some applications, linear formula from statistical method is being used in the field due to its simplicity and convenience. In this paper, these various methods are evaluated and compared with Eltinge results and new linear formula is proposed for the gasoline fuel. The results show that the corrected carbon balance equation has excellent agreement with Eltinge and Spindt's one. On the other hands, the oxygen-balanced formula has a limitation according to the mixture state and AFR. For gasoline fuel, newly proposed linear equation has good compatibility with Eltinge and Spindt up to AFR 17.

• 농촌계획
• /
• 제19권4호
• /
• pp.125-135
• /
• 2013

Analysis and evaluation of uncertainty is adopting the advanced methodology among the methods for greenhouse gas emission assessment that was defined in GPS2000 (Good practice guideline 2000) and GPG-LULUCF (GPG Land Use, Land-Use Change and Forestry). In 2006 IPCC guideline, two approaches are suggested to explain the uncertainty for each section with a national net emission and a prediction value on uncertainty as follows; 1) Spread sheet calculation based on the error propagation algorithm that was simplified with some assumptions, and 2) Monte carlo simulation that can be utilized in general purposes. There are few researches on the agricultural field including greenhouse gas emission that is generated from livestock and cultivation lands due to lack of information for statistic data, emission coefficient, and complicated emission formula. The main objective of this study is to suggest an evaluation method for the uncertainty of greenhouse gas emission in agricultural field by means of intercomparison of the prediction value on uncertainties which were estimated by spread sheet calculation and monte carlo simulation. A statistic analysis for probability density function for uncertainty of emission rate was carried out by targeting livestock intestinal fermentation, excrements treatment, and direct/indirect emission from agricultural lands and rice cultivation. It was suggested to minimize uncertainty by means of extraction of emission coefficient according to each targeting section.

• 한국농림기상학회지
• /
• 제9권3호
• /
• pp.170-178
• /
• 2007

지난 수 세기 동안 온실기체와 기타 화학적으로 중요한 미량기체들이 급격하게 증가하였다. 이러한 주요기체가 기후 변화에 미치는 영향을 이해하기 위해서는 각 기체들의 흡원과 발원을 규명하고, 생물권과 대기권 사이에서 발생하는 생물 기원 기체 플럭스들을 특성화하며, 주요 기체를 조절하는 프로세스들을 이해해야 한다. 본 논문에서는 야외 실험을 위한 실용적 방법인 enclosure 기반의 관측법을 소개한다. 특히, 토양표면에서 방출되는 일산화질소 플럭스에 대한 enclosure내에서의 질량수지 방정식과 flow-through dynamic 플럭스 챔버 기법의 민감도를 제시하고 flow-through dynamic 플럭스 챔버 방법의 물리적인 시스템과 이론을 소개한다. 또한 챔버 벽에서 발생하는 일산화질소의 손실을 고려하므로써 새로운 플럭스 계산식을 소개하였고 그 계산식의 불확실성을 논의하였다.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3169-3175
• /
• 2014

본 연구에서는 상용 BIM툴에서 기본적으로 제공하는 물량산출 기능을 활용해 탄소배출량을 산정하는 BIM 라이브러리 구축과정을 정립하고 이를 철골조 건물에 적용함으로써 그 타당성을 검증하였다. BIM 라이브러리는 요구되는 부재별 탄소배출계수를 설정한 후 매개변수를 추출하고 Revit Architecture 2013을 활용해 프로젝트 단위 설정, 매개변수 설정, 탄소 배출량 산정식 설정의 절차를 거쳐 구축하였다. 이를 통해 철골부재의 단면종류별 탄소배출계수와 단면크기별 단위무게를 입력해주는 것만으로 별도의 수작업 없이 투입자재량에 따른 탄소배출량을 산정해 낼 수 있음을 확인하였다. 본 연구에서 제시한 BIM 라이브러리 구축과정을 통해 부재별 탄소배출량 산정 라이브러리를 구축함으로써 시공단계의 투입자재량에 따른 탄소배출량을 손쉽게 산정할 수 있으며, 프로젝트 초기 설계단계에서 탄소배출량을 최소화 할 수 있는 설계대안의 선택에 일조함으로써 친환경적 건설사업 수행 및 BIM의 실무적 활용성 향상에 도움을 줄 수 있을 것으로 기대된다.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.316-323
• /
• 2013

본 논문에서는 안테나의 원거리장 특성 및 Electromagnetic Compatibility(EMC) testing을 위한 근거리 원거리장 변환에 대한 연구이다. EMC testing은 광대역 신호 및 거대 구조에 대한 원거리장 측정과 같은 복잡한 과정이 필요하다. EMC 측정 문제를 해결하기 위해, Stratton-Chu 공식을 이용하여 간단하고 직접적인 방법으로 원거리장을 예측하였다. 특히 Stratton-Chu 공식을 이용한 예측은 자유 공간상의 평면파를 통해 해석값을 비교하여 유효성을 검증했다. 패치 안테나의 근거리장 추출과 원거리장 확인을 위해, full-wave 시뮬레이션을 이용하여 Stratton-Chu 계산 결과를 비교 및 검증하였으며, 6 % 이내의 오차로 원거리장의 크기를 예측했다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권4호
• /
• pp.323-329
• /
• 2017

최근 전 세계 기온상승, 해양에서 오염물질 배출 규제 강화 등을 고려할 때 운항선도 연료 절감을 의무적으로 이행해야 한다. 항내에서 오염물질 배출에 대한 IMO 국제기준 및 EU 각국의 제한기준이 강화되고 있다. 따라서 선사와 조선업계에서는 $CO_2$, SOx, 및 NOx 배출을 저감하는 방안에 대하여 모색하고 있다. 지속적인 무역 증가와는 반비례하여 해상운송에 사용되는 연료량은 줄어드는 경향이 있다. 하지만 국제해운 회의소는 2050년까지 해운으로부터 배출되는 이산화탄소를 50% 감축한다는 목표를 설정하였다. 또한 2015년 신기후변화협약이라 불리는 파리 기후협약과 관련하여 IMO는 운항 선박으로부터 온실가스 배출 감축 목표를 설정하기로 제안하였다. 국제 해운수송에서 배출되는 온실가스 배출 감축 목표를 설정하기 위해 연료 데이터수집시스템이 도입될 예정이다. 운항선 연료절감 강제화 추세에 따라 선박으로부터 효과적인 연료 사용 감축을 유도하기 위해, 이 논문에서는 연간 운항 결과를 EEOI로 검증한 후 탄소배출권 거래제 및 탄소세에 기반 한 격려금과 벌과금 부여 제도의 운영과 이에 적용할 기초 식을 제안하였다.