• Journal of Information Display
• /
• 제11권3호
• /
• pp.123-127
• /
• 2010

Fluorescent white organic light-emitting diodes showing high color-rendering indices (CRIs) of up to 81 was demonstrated, with a silicon-cored anthracene derivative (PATSPA) doped with DPAVBi utilized as the deep-blue host and dye materials, and the commercial dyes rubrene and DCM2 utilized as the orange- and red-light-emitting dyes. The devices, consisting of three emissive layers, showed bright-white-light emission, but the ratio of the blue peak to the orange and red peaks changed with the current density and the thickness of the blue emissive layer. A high CRI was achieved with the use of a deep-blue emitter doped in a novel host and by optimizing the blue-layer thickness. The device with a blue-layer thickness of 10 nm showed the Commission Internationale de l'Eclairage (CIE) color coordinate of (0.33, 0.35), a high CRI of 81, and a moderate external quantum efficiency of 2% at a current density of $2.5\;mA/cm^2$.

• 천문학회보
• /
• 제41권1호
• /
• pp.66.2-66.2
• /
• 2016

Red quasars have been suspected to be an intermediate population between merger-driven star-forming galaxies and normal quasars. In this scenario, red quasars are expected to have dusty red color coming from the dust extinction by dust and gas in their host galaxy. However, several studies have proposed different explanation of the red color of red quasars, which are i) a moderate viewing angle between type 1 and 2 quasars, ii) an unusual covering factor of dust torus, and iii) an anomalous synchrotron emission with a peak at NIR wavelength. In this study, we investigate the factor leading to the red color of red quasars by using the line luminosity ratios of the hydrogen Balmer to Paschen series of 11 red quasars. We find the Pb/Hb luminosity ratios of the red quasars are significantly higher than those of normal quasars. Moreover, we compare the Pb/Hb luminosity ratios of the red quasars to the theoretically expected line luminosity ratios computed from the CLOUDY code. We find the line luminosity ratios of the red quasars cannot be explained by the theoretical line luminosity ratios with any physical conditions. We conclude that red color of red quasars comes from dust extinction by their host galaxy. This result is consistent with the picture that red quasars are an intermediate population between the merger-driven star-forming galaxies and normal quasars.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.11-15
• /
• 2017

Red phosphors, $Sr_2Si_5N_8:Eu^{2+}$, were synthesized as a single-phase crystal structure by optimizing carbon and $Eu^{2+}$ contents in a carbothermal reduction nitridation method. With increasing $Eu^{2+}$ contents, the photoluminescence spectra were red-shifted from 600 nm peak for 1 mol% for to 700 nm for 7 mol%. It was suggested that this red shift is attributed to the energy transfer from one low-energy sited $Eu^{2+}$ (1) to other high-energy sited $Eu^{2+}$ (2). Finally, the best red sample (620 nm emission peak and 80 nm half width for 3 mole% of $Eu^{2+}$) was packaged on a Blue LED together with two additional green and yellow phosphors, the fabricated White LED showed a high color-rendering index of 90 and white color coordinates of x= 0.321 and y = 0.305.

• 마이크로전자및패키징학회지
• /
• 제9권1호
• /
• pp.9-13
• /
• 2002

최근, 효율적인 다층박막 구조로된 풀칼라 유기 전계발광소자 (organic electroluminescient device, OELD)의 시제품이 개발된바 있다. 본 연구에서는 ITO (indium tin oxide)/glass 투명기판위에 다층구조의 OELD 소자를 진공 열증착법으로 제작하였다. 사용된 저분자 유기화합물은 전자수송 및 주입층으로 $Alq_3$(trim-(8-hydroxyquinoline)aluminum)와 CTM (carrier transfer material) 물질을 사용하였고, 정공수송 덴 주입층으로는 TPD (triphenyl-diamine)와 CuPc (copper phthalocyanine)를 각각 증착하였다. 발광휘도는 임계전압 10 V 이상에서 급격히 증가하였으며, $A1/CTM/Alq_3$/TPD/1TO 구조로된 OELDs 소자의 경우- l7 V전압에서 430 cd/$m^2$의 휘도특성과 파장 512 nm의 녹색 발광을 나타내었다. 한편 $Li-A1/Alq_3$/TPD/CuPC/1TO 다층구조로된 소자의 발광파장은 508 nm 이며, 발광휘도는 17 V에서 650 cd/$m^2$의 값을 얻을 수 있었다. Li-Al 전극을 갖는 다층구조에서 발광휘도의 증가는 정공주입층인 CuPc의 적층으로 발광층에서 재결합 효율이 개선되었기 때문이며, 또한 Li-Al 전극의 경우 Al전극에 비해 낮은 일함수(work function)를 갖기 때문으로 판단된다.

• Composites Research
• /
• 제31권4호
• /
• pp.145-150
• /
• 2018

항공우주산업에서 구조물의 수명연장과 경제적 측면에서의 효율적인 운용을 위해 다양한 구조건전성모니터링(Structural Health Monitoring, SHM) 기법들이 제시되어왔다. 금속재 구조물의 경우, 수분이나 염분 등에 의한 부식이나 쉽게 응력집중이 발생하는 타공, 노치, 볼트 등과 같은 위치에서의 균열이 주된 관심사였으나, 항공우주산업에서의 복합재 사용비율이 증가함에 따라 손상 메커니즘이 더욱 복잡한 복합재 구조물에 적용이 가능한 고도화된 SHM 시스템의 필요성이 강조되고 있다. 본 논문에서는 Q-switched 레이저와 다수의 압전센서를 이용한 복합재에서의 AE(Acoustic emission) 위치탐지 기법을 제시한다. 제시되는 기법은 10 mm 이내의 거리오차로 방출위치 탐지를 목표로 하며 복합재 구조에서 수행된 AE 모사실험 및 위치탐지 시도 결과를 제시하여 기법이 유효함을 증명한다.

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.399-404
• /
• 2008

Spray pyrolysis was applied to prepare $M_{3}MgSi_{2}O_{8}:Eu^{2+}$ (M=Ca, Sr, Ba) blue phosphor powder. The library of a Ca-Sr-Ba ternary system was obtained by a combinatorial method combined with the spray pyrolysis in order to optimize the luminescent property under vacuum ultraviolet (VUV) excitation. 10 potential compositions were chosen from the first screening. The emission shifted to longer wavelength as Ca became a dominant element and the emission intensity was greatly reduced in the composition region at which Ba is dominant element. On the base of the first screening result, the second fine tuning was carried out in order to optimize the luminescence intensity under VUV excitation. The optimal composition for the highest luminescence intensity was $(Ca_{1.7},\;Sr_{0.3},\;Ba_{1.0})Si_{2}O_{8}:Eu^{2+}$ which had the color coordinate of (0.152, 0.072) and about 64% emission intensity of $BaMgAl_{10}O_{17}$ (BAM) phosphor.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.243.1-243.1
• /
• 2016

Recently, many groups have attempted to fabricate 3-dimensional (3D) structures of GaN such as pyramids, rods, stripes and annulars. Since quantum structures on non-polar and semi-polar planes of 3D structures have less influence of internal electric filed, multi quantum wells (MQWs) formed on those planes have high quantum efficiency. Especially, pyramidal and annular structures consist of various crystal planes with different emission wavelength, providing a possibillity of phosphor-free white light emtting diodes (WLEDs).[1] However, it still has problem to obtain high color rendering index (CRI) number because of narrow-band emission and poor indium composition caused by the formation of few number of facets during metal-organic chemical vapor deposition growth.[2] If we can fabricate 3D structure having more various facets, we can make broad-band emittied WLEDs and improve CRI number. In this study, we suggest a simple method to fabricate 3D structures having various facet and containing high indium composition by means of a combination of metal-organic chemical vapor deposition and wet chemical etching techniques.

• 한국결정성장학회지
• /
• 제10권4호
• /
• pp.302-308
• /
• 2000

탄산칼슘을 모재로 한 형광체 제조를 위하여 비정질 탄산칼슘 전구체를 합성할 때 용액의 농도, 반응온도, 유지시간 및 모액의 pH의 영향을 조사함으로써 안정한 비정질 탄산칼슘을 합성할 수 있었으며, 물 속에 침적하여 결정화 조건을 달리하여 줌으로써 calcite, aragonite, vaterite의 결정 상을 얻을 수 있었다. 또한 활성원소로서 Sn을 첨가하여 비정질 탄산칼슘을 합성하고, 이를 결정화시켜 각 결정형에 따른 형광특성을 조사하였다. 결정형에 따른 발광강도는 calcite가 가장 우수하였으며, 발광중 심파장은 순수한 청색을 나타내는 464 nm였다. calcite의 발광강도는 여기파장 255 nm에서 최대가 되었으며, 형광램프용의 형광체로 사용하기 적합한 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.163-168
• /
• 2009

Hyperbranched conjugated polymers (p-HPPV and m-HPPV) with para and meta linkages were synthesized from $A_2$ and $B_4$ type monomers through Wittig polycondensation. The synthesized p-HPPV and m-HPPV were completely soluble in common organic solvents such as chloroform, tetrahydrofuran, 1,2-dichloroethane, etc. and thermal gravimetric analyses showed that p-HPPV and m-HPPV are stable up to $350^{\circ}C$. The molecular weights (from GPC), UV-visible, and photoluminescence maximum peaks of p-HPPV and m-HPPV are characterized in detail. The fabricated EL devices using the synthesized hyperbranched polymers, (ITO/(p-HPPV or m-HPPV)/Al), showed EL emission at about 507 nm and 481 nm (681 nm), respectively. Especially, EL device from m-HPPV were found to exhibit nearly white emission with approximate CIE coordinates of (0.31, 0.34) compared with (0.310, 0.316) of NTSC white color at $100\;cd/m^2$. The good photophysical properties combine with good film-form ability could make these hyperbranched polymers to be a potential candidate for the EL materials.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.564-568
• /
• 1999

The 8-hydroxyquinoline Zinc(Znq2) were prepared successfully from zinc chloride and zinc acetate as two kinds of starting material. The organic electroluminescent devices(ELDs) were fabricated by the structure of ITO/TPD/Znq2/Al with N-N'-diphenyl-N-N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) which acts hole trasporting layer and bis(8-oxyquinolino) zinc(II)(Znq2) which acts as emission and electron transporting layer. EL efficiency of Znq2 prepared by heating was investigated. The 570nm of main emission peak which is yellowich green was investigated by photo luminesence(PL) and this results shows that electro luminescence(EL) is from Znq2. The V-J curve shows that carrier injection were investigated from 4V. Maximum luminance and luminance efficiency were 1600cd/$\m^2$, 0.9lm/W. From this results, the Znq2 can be one of the useful organic EL material.