한국분말재료학회지 (Journal of Powder Materials)

  • 제15권5호
  • /
  • Pages.399-404
  • /
  • 2008
  • /
  • 2799-8525(pISSN)
  • /
  • 2799-8681(eISSN)
한국분말재료학회 (*구 분말야금학회) (The Korean Powder Metallurgy & Materials Institute)
권호 표지
DOI QR코드

DOI QR Code

분무열분해법을 이용하여 M3MgSi2O8:Eu2+ (M=Ca, Sr, Ba) 형광체 분말의 VUV 특성 최적화

Optimization of VUV Characteristics of M3MgSi2O8:Eu2+ (M=Ca, Sr, Ba) Phosphor by Spray Pyrolysis

  • 정유리 (공주대학교 화학공학부) ;
  • 정경열 (공주대학교 화학공학부)
  • Jung, You-Ri (Department of Chemical Engineering, Kongju National University) ;
  • Jung, Kyeong-Youl (Department of Chemical Engineering, Kongju National University)
  • 발행 : 2008.10.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Spray pyrolysis was applied to prepare $M_{3}MgSi_{2}O_{8}:Eu^{2+}$ (M=Ca, Sr, Ba) blue phosphor powder. The library of a Ca-Sr-Ba ternary system was obtained by a combinatorial method combined with the spray pyrolysis in order to optimize the luminescent property under vacuum ultraviolet (VUV) excitation. 10 potential compositions were chosen from the first screening. The emission shifted to longer wavelength as Ca became a dominant element and the emission intensity was greatly reduced in the composition region at which Ba is dominant element. On the base of the first screening result, the second fine tuning was carried out in order to optimize the luminescence intensity under VUV excitation. The optimal composition for the highest luminescence intensity was $(Ca_{1.7},\;Sr_{0.3},\;Ba_{1.0})Si_{2}O_{8}:Eu^{2+}$ which had the color coordinate of (0.152, 0.072) and about 64% emission intensity of $BaMgAl_{10}O_{17}$ (BAM) phosphor.

키워드

참고문헌

  1. C. R. Ronda, H. Justel and H. Nikol: J. Alloys Compd., 275-277 (1998) 669 https://doi.org/10.1016/S0925-8388(98)00416-2
  2. J. Zhang, Z. Zhang, Z. Tang, Y. Tao and X. Long: Chem. Mater., 14 (2002) 3005 https://doi.org/10.1021/cm011744u
  3. K. Y. Jung, D. Y. Lee, Y. C. Kang and H. D. Park: J. Lumin., 105 (2003) 127 https://doi.org/10.1016/S0022-2313(03)00118-2
  4. Y. R. Do, D.-H. Park and Y.-S. Kim: J. Electrochem. Soc., 151 (2004) H210 https://doi.org/10.1149/1.1787632
  5. C. Deng, W. Zhuang, D. He, Y. Wang, K. Kang and X. Huang: Physica B, 344 (2004) 470 https://doi.org/10.1016/j.physb.2003.11.004
  6. Y. C. Kang, H. S. Roh, H. D. Park and S. B. Park: Ceram. Int., 29 (2003) 41 https://doi.org/10.1016/S0272-8842(02)00087-1
  7. K. Y. Jung, E. J. Kim and Y. C. Kang: J. Electrochem. Soc., 151 (2004) H69 https://doi.org/10.1149/1.1646155
  8. Y. Shimomura and N. Kijima: J. Electrochem. Soc., 151 (2004) H192 https://doi.org/10.1149/1.1767160
  9. B. W. Jeoung, G. Y. Hong, W. T. Yoo and J. S. Yoo: J. Electrochem. Soc., 151 (2004) H213 https://doi.org/10.1149/1.1790513
  10. K. Y. Jung, Y. C. Kang and Y.-K. Park: J. Ind. Eng. Chem., 14 (2008) 224 https://doi.org/10.1016/j.jiec.2007.09.011
  11. K. Y. Jung and J. H. Seo: Electrochem. Solid-state Lett., 11 (2008) J64 https://doi.org/10.1149/1.2917584
  12. K.-S. Sohn, D. H. Park, S. H. Cho, B. I. Kim and S. I. Woo: J. Comb. Chem., 8 (2006) 44 https://doi.org/10.1021/cc050101z
  13. D. H. Park, S. H. Cho, J. S. Kim and K.-S. Sohn: J. Alloys Comp., 449 (2008) 196 https://doi.org/10.1016/j.jallcom.2006.01.140
  14. J. S. Kim, A. K. Kwon, Y. H. Park, J. C. Choi, H. L. Park and G. C. Kim: J. Lumin., 122-123 (2007) 583 https://doi.org/10.1016/j.jlumin.2006.01.231
  15. Y. Lin, Z. Tang, Z. Zhang and C. W. Nan: J. Alloys Comp., 348 (2003) 76 https://doi.org/10.1016/S0925-8388(02)00796-X
  16. K. Y. Jung, K. H. Han, Y. C. Kang and H.-K. Jung: Mater. Chem. Phys., 98 (2006) 330 https://doi.org/10.1016/j.matchemphys.2005.09.032