• 자동차안전학회지
• /
• 제8권2호
• /
• pp.6-10
• /
• 2016

The objective of this paper is to understand value of active safety features on the customer perspective. In this study, 30 participants who don't have experience with active safety features were recruited and asked for preference, usefulness and consideration of each active safety feature after driving evaluation by them. Through this research, the preference of active safety features were analyzed and which of active safety features were the most useful and the most considered by customer when they purchase new vehicle. As a result, adaptive cruise control and side blind zone alert were the most strongly preferred and considered features by respondents and it means that respondents wanted comfort environment while driving and seemed to value features that compensated for limited visibility. On the other hand, active safety features that warned driver without control of the vehicle was deemed generally less desirable such as lane departure warning and forward collision alert. But autonomous emergency braking was higher than the other active safety features with only warning even if they did not have experience for it while this test. They thought it will be helpful in case of front-end collision situation even they just listened description before the test.

• 자동차안전학회지
• /
• 제15권3호
• /
• pp.59-65
• /
• 2023

As advanced driving assistance system (ADAS) and autonomous driving performance continue to improve, existing crash accidents and crash types are changing. Accordingly, the collision angle and the seating posture of the occupant are changed. It is necessary to study how the occupant injury mechanism changes according to these different crash types. In this regard, a representative crash test mode was derived when the automatic emergency braking system (AEB), one of the autonomous driving performance, was applied to the representative car-to-car crash scenario in Korea. The derived crash test mode was used to analyse the mechanisms of collision injuries according to both impact angle and the occupant seating posture (reclined seat-back angle). The results obtained through this study can be utilized as reference data for the development of new crash evaluation methods and improvements in crash restraint systems for enhancing crash safety.

• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.61-69
• /
• 2020

본 논문은 국내 고속형 화물열차에 적용되는 P4a 분배밸브를 갖는 화물열차의 장대 편성시 제동특성에 관한 것이다. 제동신호가 열차의 끝단까지 연결된 제동관을 통해 공기압력으로 전달되는 화차의 제동은 열차 길이와 사용된 밸브 등에 따라 영향을 받기 때문에 실험적 방법으로 확인한다. 장대화물 열차의 제동 특성은 평상시 운영의 약 2배인 50량으로 구성한 화물열차의 비상제동과 상용제동의 시험을 이용하였다. 1, 10, 20, 30, 50번째 차량에서 제동 실린더 압력이 측정되었다. 열차의 길이가 길어질수록 후방의 차량은 제동이 늦게 체결되는 제동지연 현상을 확인하였으며 특히 비상제동시 차량간 충격이 클 것을 예상할 수 있었다. 제한된 시험의 결과를 보완하고 향후 제동거리 계산을 위해 열차를 구성하는 모든 차량에서의 제동 압력을 예측할 필요가 있다. 제동시 각 차량에서의 압력은 계산시간의 단축과 신뢰성 있는 정보를 제공하는 것으로 알려진 선형보간, 단계형, 지수함수형의 경험적 모델들을 이용하여 예측하였다. 경험적 모델들의 예측결과는 실측한 결과들과 비교하였으며 지수함수형 모델이 비교적 정확하게 예측하고 있음을 확인하였다. 본 연구의 결과는 장대화물열차의 안전한 운용에 기여하고 화물열차의 제동거리 예측과 제동시 차량간 충격량 계산 등에 활용될 수 있을 것으로 예상된다.

• 한국정보통신학회논문지
• /
• 제9권8호
• /
• pp.1716-1721
• /
• 2005

본 논문에서는 ESP와 4WS 차량의 동적성능에 관한 연구와 차량이 불안정 영역으로의 주행 시 안정영역으로의 거동으로 할 수 있게 하는 차량의 주행안정성 향상에 관한 연구를 수행하였다. 고속으로 주행하는 차량이 조향과 동시에 가${\cdot}$감속을 하는 경우 관련된 변수로는 종방향 및 횡방향의 속도변화, 요우잉 등을 들 수 있으며, 이 변수들은 타이어 특성, 차량의 중량, 제동력, 조향각등에 따른 동역학적 관계식들로 표현 할 수 있다. 본 연구는 위와 같은 제동${\cdot}$조향장치들을 제어하여, 차량의 주행 중 위급상황 시 탁월한 성능을 발휘 할 수 있는 시스템에 관하여 고찰하고, 위급상황을 안전하게 회피하여 교통사고를 획기적으로 줄이기 위함이다.

• 자동차안전학회지
• /
• 제10권4호
• /
• pp.25-32
• /
• 2018

Due to the rapid increase in the number of vehicles, the physical and human losses caused by traffic accidents have become serious social problems. In the global trend, there have been active studies conducted on improving safety level of automobile in order to reduce the number of automobile accident. As a result of such research, traffic accidents continue to decline. In the case of South Korea, however, rate of death by automobile accident is 8.5 per 10,000 people and it is a seven rank among the countries in OECD (Organization for Economic Cooperation and Development). This average rate is almost double compared to average automobile accident rate per 10,000 vehicles, of other OECD countries in 2015. Consequently, many studies and policies currently have been conducted and made for increasing safety of pedestrians; however, they are only emphasizing characteristics of pedestrians and drivers. For this reason, this study suggests scenarios for establishment of test standard corresponding with domestic environment and international standard of AEB (Autonomous Emergency Braking) and conducts a real car test by scenarios by setting up a goal with a function for remaining distance after braking and then examine equation by comparing real car tests results and outcome after calculation. This is a theoretical method to predict a relative remaining distance after AEB prior to conducting a real car test for evaluation of safeness of automobile with AEB and it is expected that it solves problem of complication of real car test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.132-139
• /
• 2011

ATP(Automatic Train Protection) system in railroad signalling system is on-board signalling system which is controlled by train control information such as location and speed of trains. Safety is ensured by transmitting the train control information between on-board and wayside device in the ATP system. When an engineer disregards the speed limit on a tachometer, the train is automatically stopped by the on-board device. Recently, the studies of increasing speed of the train have been developed. Eurobalise in ERTMS/ETCS system is used in case that speed of trains is up to 500[km/h]. A study of safety braking distance is needed by increasing the speed of train in the ATP system. Train data and track data are required to calculate the safety braking distance. The train data includes formations of trains, length of trains, service brake and emergency brake etc. Also, the track data includes slope of track, curve of track, length of track, speed limit etc. In this paper, the speed profile is computed by analyzing the train and track data in the ATP system. It is demonstrated by applying to subway line 2 in Seoulmetro through the on-site test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.280-281
• /
• 2011

Special Protection Scheme(SPS) that operates scenarios about faults beyond the normally protective action is wide system protection technology for the purpose of wide areas protection. Therefore, the SPS focuses on the improvement of the power supply capability by protecting the system rather than protecting the system equipments. Since the SPS requires emergency operation, the operation schedule is set up in advance by analyzing various scenarios. Since the SPS's action scheme uses generator tripping and is a classical method it is presently the most powerful one. However, as the setting of SPS is set to the most severe disturbance, the scheme tends to trip more generators than required to prevent fault propagation. It is highly likely that tripping generator units to prevent fault propagation would result in difficulty of system management and possibility of load shedding. Accordingly, it is desirable that generators are connected to the system within the range that ensures system stability and intelligent SPS is currently under development to solve the problem being stated. In this paper, as a part of developing the intelligent SPS, application of the fast-valving and braking resistor scheme to the generators is being proposed and analysed to reduce the number of tripped generators.

• 대한안전경영과학회지
• /
• 제20권2호
• /
• pp.1-8
• /
• 2018

This study aims to provide a real-time information to the driver by effectively operating the advanced safety device attached to the freight vehicle, thereby minimizing insecure behavior of the driver such as speeding, rapid acceleration, sudden braking, And improve driving habits to prevent accidents and save energy. Advanced safety equipment is a device that warns the driver that the vehicle leaves the driving lane regardless of the intention of the driver and reduces the risk of traffic accidents by mitigating or avoiding collision by detecting a frontal collision during driving.The main contents of this report are as follows: In case of installing a warning device on a lane departing vehicle (excluding a light vehicle) and a lorry or special vehicle with a total weight exceeding 3.5 tonnes, the driver must continue to operate unless the driver releases the function.In addition, when the automatic emergency braking system is installed, the structure should be such that the braking device is operated automatically after warning the driver when the risk of collision with the running or stopped vehicle in the same direction is detected in front of the driving lane.

• 제어로봇시스템학회논문지
• /
• 제8권10호
• /
• pp.898-906
• /
• 2002

Antilock Brake System (ABS) is designed to prevent wheels from being locked-up under emergency braking of a vehicle. Therefore it improves directional stability of the vehicle, shortens stopping distance, and enhances maneuvering during braking, regardless of road conditions. Hardware In-the-Loop Simulation (HILS) is an effective tool for design Performance evaluation and test of vehicle subsystems such as ABS, active suspension, and steering systems. This paper describes a HILS model for ABS/ ASR(Acceleration Slip Regulation) system applications. A fourteen degrees-of-freedom vehicle dynamics model is simulated in an alpha-chip processor board. The proposed HILS system is tested with a basic ABS control algorithm. The design and implementation of HILS system for the ABS ECU(Electronic Control Unit) development of commercial vehicle are presented. The results show that the proposed HILS system can be used to test the performance, stability, and reliability of a vehicle under braking.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.31-42
• /
• 2012

Urban transit vehicle that uses electrical energy, is faster, safer and energy-efficient public transit than other means. As a Research method, the Matlab/Simulink are used to modeling a regenerative brake-capable train, and actual parameters such as powering and braking characteristics, all kinds of resistance, passenger load, velocity, gradient, radius of curve etc and powering and breaking commands per time or distance are inputted to train's dynamic equation, then a simulation program is made and used to yield train driving pattern and driving time and the amount of driving energy used thereby at auto and manual operation and at all sector.