• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.459-467
• /
• 2017

An urban railway power substation consists of three thyristor dual converters. Two converters are connected to up and down trolley line to supply the electric energy or feed the regenerative energy back to the distribution. When the two converters break down, the remaining converter is used in an emergency. One thyristor dual converter system (TDCS) manages the energy of two or three railway stations. If the TDCS fails, the trains stop operating. To solve the problem, this paper proposes the three parallel operation control algorithm of thyristor dual converter system using the emergency converter. The broken TDCS can be replaced by the emergency converter in other TDCS. The effectiveness of this proposed control is verified by simulation.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.410-413
• /
• 1998

In this paper, we present the method that improve alarm security system using the electronic circuits added the emergency lamp by our proposed Algorithms. In conventional method the emergency lamp of warning & alarm system didn't work perfectly its performance because of battery with short life. For improving this problem we, using Peripheral Interface Controller IC, designed the circuit added the emergency lamp for an warning & alarm system and for prevention against stopping the electric current, and compared our proposed method with conventional method. By designing the circuit to stop up over charge we can extend life of battery, use for a stoppage of electric current in emergency and according to the lightness around. Therefore we are very convenient and profitable in our life. In the future we will study the method to lower the cost of architecture for practical utilization.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.296-297
• /
• 2011

Many applications involving induction motors that are controlled using variable frequency drives require the ability to stop quickly. These applications include emergency stops, quick stopping of fans, centrifuges, presses, etc. The technique that is widely accepted in the industry for achieving quick stopping makes use of brake resistors in series with a power semiconductor switch. The switch-resistor combination (brake-unit) is applied across the dc bus. The fastest decelerating time achievable depends on the size of the resistors and the switch employed. In this paper, the authors propose a novel method of achieving quick stopping times without the use of any brake-unit. Experimental test results with and without this method on a large inertia motor-load combination show that the proposed stopping method is able to reduce the stopping time significantly compared to normal decelerated stop without the need for a braking unit.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.446-455
• /
• 2010

The research presented covers the design and control method of unmanned ground vehicle (UGV). An electric vehicle is used and is driven by DC motor. The power system on the UGV has been adjusted and actuators have been installed for steering and brake automation. A toggle switch is implemented to easily switch between manual and autonomous states. The UGV state is monitored by a velocity sensor, as well as steering and brake position sensors. An emergency stop device was designed and installed to quickly and safely stop the UGV. Different control methods, including the PID controller, were studied for improved steering responsiveness, and results were confirmed through experimentation. Satisfactory performance was achieved and several possible areas of future research have arisen.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1601-1602
• /
• 2007

Steam stop valves of steam turbine in the power plant are at their 100% position and have no movements. Steam control valves, ie governor valves have no movements either at their controlling position on load limit operation. By the way, if there were no change of operation state, steam valves could be sticked mechanically. Because the governor could fail in protecting and controlling steam turbine in case of emergency conditions, the closing test of 100% valve travel must be accomplished periodically for the purpose of testimony of their good conditions. And, As the difference between steam turbine structures exists according to the manufacturer or generation capacity, both steam stop valves and steam control valves differes in structure and operation method. Therefore, it is essential for not only turbine protection but also control for the control engineers to find out composition of steam valves and method of closing test.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.68-70
• /
• 2006

This paper formulates the principle of the magnetic actuator break system (MASS) for emergency situation driving a car. When the exciting break system of a car is broken, MASS will be able to stop the car by the electric system. MASS controls the rotating wheel to slow down gradually while holding and laying the wheel down several ten times per second. We present the magnetic field and dynamic behavior analyses for the magnetic actuator break system using finite element method (FEM) associated with parameter, for calculating the displacement of the moving parts and the supplying current.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.1
• /
• pp.19-27
• /
• 2017

In this paper, a simulator hardware and control design for an electronic parking brake (EPB) are proposed for emergency vehicle braking when the hydraulic break and anti-lock brake systems (ABS) fail to function. EPB systems are designed specifically for park braking and are usually installed on the rear wheels. However, in an emergency situation when all vehicle brake systems fail, the EPB can be utilized to stop the vehicle and track the target slip ratio as the ABS. This paper analyzed the non-linear EBP of the type of motor on caliper (MoC) based on experiments. A simulator hardware is also designed to validate the performance of the designed EPB controller in terms of braking distance and performance in tracking the target slip ratio. Through the experimental analysis, it is confirmed that a sliding mode controller can be applied on a non-linear EPB to track the target slip ratio.

• The Korean Journal of Emergency Medical Services
• /
• v.13 no.3
• /
• pp.77-90
• /
• 2009

Civil complaints and lawsuits filed in the process of providing emergency medical service include fall accident on the way of carrying the patient, transfer consent, refusal and rejection of rescue request, range and behavior restriction of emergency medical technicians, false registry of logbook, neglect of duty and emergency patient, and violation of traffic laws on the way of dispatch to the scene of accident. This study suggested the measures by cases as follows. 1. The accidents on the way of carrying a patient could be divided into fall of patient and fall by paramedic's mistake. In the former case, damages caused by the ambulance's shaking must be notified to the patient and guardian and recommended to fasten seat belt, in the latter case, the plan of patient's posture, route of transport, rescue and equipments should be comfirmed before fixing the patient. 2. Transfer consent must be made as implied when the patient is unconscious under delusion and was not able to consent physically, and paramedic must take an action by his judgment and record details of services on logbook. 3. When a patient refused to transfer, get 'confirmation of transfer refusal' and inform him of refusal. Paramedic should receive the signature. In addition, in case of refusal, transfer request should be made after hearing doctor's opinion and it should be notified to transfer request and superintendent of fire station after making 'confirmation of transfer refusal'. 4. Emergency medical technicians should perform their duties within the range of services prescribed by Article 41 of Law of Emergency Medical Service and Article 33 of Its Enforcement Regulations and shall not make announcement of death. In case of reporting the death to guardian, it is desirable to use record data like ECG results. 5. The best way to have protection from legal problems is making and keeping the exact records of accident and patient. Paramedic should not mention his subjective opinion about the accident-related matter. He must record correctly and keep the original medical records. 6. As emergency medical technicians are responsible for taking care of emergency patients, they must contact a briefing room when they meet a difficult situation suddenly due to vehicle stop or treatment of other patients and then must have support from neighboring hospital and other safety centers. 7. Since the ambulance operator is responsible for safety and careful driving of ambulance, he must be careful when he violates traffic regulations unavoidably. The operator should drive slowly below 10km/h at an intersection and pass it after getting way from general vehicles driving from all directions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.191-196
• /
• 2019

In the case of urban railway facilities, the power supply should be maintained for the safe movement of passengers in communication facilities, disaster prevention facilities and boarding area security because of the confusion when power supply is cut off due to the nature of public transportation. In addition, considering that the number of trains is running on the urban railway line, it is necessary to operate at least 30 minutes for the bus stop and at least 1 hour for the communication and disaster prevention facilities. Therefore, it is essential to supply emergency power source to maintain stable operation of induction lamp and smoke exhaust system because main power is cut off in order to prevent further spread due to fire in case of the history of urban railway section or vehicle fires. Recently, UPS(Uninterruptible Power Supply) function to prevent power outage in emergency, emergency power generation combined with ESS function which saves electricity at nighttime price time, A hybrid power storage system with a UPS function.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.177-182
• /
• 2017

The purpose of the study is to investigate the intravenous access of paramedics in ambulance. The study consisted of confidence change in pre and post intravenous access by driving condition and speed of the vehicle. The research subjects were 30 119 paramedics (20 level 1 emergency medical technicians, 10 nurses), and 6 ambulance driving conditions were established in order to measure the number of attempts at intravenous access. The data was collected for 9 days from May 18 through May 27, 2017. The results show no disparities in number of attempts in terms of stop conditions and flat section driving conditions(p=.161) although there were significant disparities in unpaved road(p=.003), speed bump(p=.005), curve(p=.022), and slope(p=.003) section driving conditions. Confidence appeared to significantly rise(p=.000) after the experiment. In conclusion, it is recommended that swift intravenous access inside an ambulance while driving is attempted when the vehicle has come to a stop or a flat section and paramedics should maintain their confidence in intravenous access through continued training.