• Korean Journal of Medicinal Crop Science
• /
• v.3 no.2
• /
• pp.100-106
• /
• 1995

This study was conducted to find the factors affecting somatic embryogenesis in suspension culture of Rehmania glutinosa and investigate the possibility of artificial seed production by encapsulation of somatic embryos. Linsmeier-Skoog medium was appeared as proper for somatic embryogenesis. Sucrose with $3{\sim}5%$ as carbon sources was good for somatic embryogenesis, and both ammonium and nitrate nitrogen were necesary for normal somatic embryo production. BA with NAA or kinetin with NAA were better than the use of cytokinin alone for both somatic embryogenesis and numbers of somatic embryos. $AgNO_3$ as protectant for vitrification of seedlings in vitro culture had no harmful effect on somatic embryos. Sphericity of encapsulated seeds was good at 3% gel of sodium alginate but germination was better at 2.5% sodium alginate level. Artificial seeds were germinated and developed normal shoots and roots under in vitro condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.4
• /
• pp.487-495
• /
• 2007

The objectives of the present study were to initiate cloning of Korean native goat by somatic cell nuclear transfer (NT) and to examine whether unovulated (follicular) oocytes can support the same developmental ability of NT embryos as ovulated (oviductal) oocytes after hCG injection in stimulated cycles of the goat. The in vivo-matured and immature oocytes were collected from the oviducts and follicles of superovulated does, respectively, and the immature oocytes were maturated in vitro. Ear skin fibroblasts derived from a 3-yr-old female Korean native goat were used as the donors of nuclei or karyoplasts. Following fusion, activation and in vitro culture to a 2- to 4-cell stage, 49 in vitro-derived and 105 in vivo-derived embryos were transferred to 6 and 17 recipient does, respectively. One doe and three does of the respective groups were identified as pregnant by ultrasonography on day 30 after embryo transfer. However, only one doe, which had received in vivo-derived embryos, delivered a normal female kid of 1.9 kg on d 149. The cloned kid gained more weight than her age-matched females as much as 87% during the first 4 mo after birth (17.7 vs. $9.4{\pm}0.8$ kg) and reached puberty at 6-mo age a few months earlier than normal female does. The telomere length of the kid, which was similar to that of the donor fibroblast at 2-mo age, decreased 8% between 2- and 7-mo ages. Moreover, at 7-mo age, she had 21% shorter telomere than her age-matched goats. To our knowledge, this is the first case in which a cloned animal born with a normal weight exhibited accelerated growth and development. The unusually rapid growth and development of the cloned goat may have resulted from SCNT-associated epigenetic reprogramming involving telomere shortening.

• Journal of Plant Biotechnology
• /
• v.38 no.2
• /
• pp.186-190
• /
• 2011

This study was conducted to evaluate effects of various kinds or concentrations in abscisic acid (ABA), reduced nitrogen sources (casein hydrolysate, casamino acid and L-glutamine) and osmoticum for production of somatic embryos (SEs) from pro-embryogenic mass (PEM) in yellow poplar (Liriodendron tulipifera). In comparison of various concentrations of ABA, the highest number (640/10 mg PEM) of SEs was marked in the treatment of 0.5 mg/L. With higher concentration than 0.5 mg/L ABA, number of induced SEs were decreased. And the lowest number of SEs were obtained from the treatment of 20 mg/L ABA. Differences of 8 treatments of the nitrogen sources in the medium were also compared. In the experiment of 8 treatments for SEs production, the highest result showed in the treatment of 500 mg/L casamino acid (223/5 mg PEM). In comparison of different kinds/concentrations of osmotica for SEs induction, the best response was obtained from the treatment of 4% sucrose (317/5 mg PEM). In contrast, no SEs were found from the treatments supplemented with any concentrations of maltose.

• Proceedings of the KSAR Conference
• /
• 2001.10a
• /
• pp.37-43
• /
• 2001

1. About fifty thousand of cattle embryos were transferred and 16000 ET-calves were born in 1999. Eighty percents of embryos were collected from Japanese Black beef donors and transferred to dairy Holstein heifers and cows. Since 1985, we have achieved in bovine in vitro fertilization using immature oocytes Collected from ovaries of slaughterhouse. Now over 8000 embryos fertilized by Japanese Black bull, as Kitaguni 7 -8 or Mitsufuku, famousbulls as high marbling score of progeny tests were sold to dairy farmers and transferred to their dairy cattle every year. 2. Embryo splitting for identical twins is demonstrated an useful tool to supply a bull for semen collection and a steer for beef performance test. According to the data of Dr.Hashiyada (2001), 296 pairs of split-half-embryos were transferred to recipients and 98 gave births of 112 calves (23 pairs of identical twins and 66 singletons). 3. A blastomere-nuclear-transferred cloned calf was born in 1990 by a joint research with Drs.Tsunoda, National Institute of Animal Industry (NIAI) and Ushijima, Chiba Prefectural Farm Animal Center. The fruits of this technology were applied to the production of a calf from a cell of long-term-cultured inner cell mass (1998, Itoh et al, ZEN-NOH Central Research Institute for Feed and Livestock) and a cloned calf from three-successive-cloning (1997, Tsunoda et al.). According to the survey of MAFF of Japan, over 500 calves were born until this year and a half of them were already brought to the market for beef. 4. After the report of "Dolly", in February 1997, the first somatic cell clone female calves were born in July 1998 as the fruits of the joint research organized by Dr. Tsunoda in Kinki University (Kato et al, 2000). The male calves were born in August and September 1998 by the collaboration with NIAI and Kagoshima Prefecture. Then 244 calves, four pigs and a kid of goat were now born in 36 institutes of Japan. 5. Somatic cell cloning in farm animal production will bring us an effective reproductive method of elite-dairy- cows, super-cows and excellent bulls. The effect of making copy farm animal is also related to the reservation of genetic resources and re-creation of a male bull from a castrated steer of excellent marbling beef. Cloning of genetically modified animals is most promising to making pig organs transplant to people and providing protein drugs in milk of pig, goat and cattle.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.7-12
• /
• 2012

The effect of water temperature on spawning induction, larval development, spat settling and its growth of the cockle shell, Fulvia mutica, were investigated to obtain the basic data for effective seed production. The eggs, which were randomly divided into 6 groups of water temperatures of 14, 17, 20, 23, 26 and $29^{\circ}C$, were transferred into 1 L beaker, respectively. The relationships between the water temperature and the required time (1/h, hour) by each egg developmental stage were calculated. Biological minimum water temperature and the cumulative water temperature until egg development of the veliger stage were calculated to be $0.1^{\circ}C$ and $397.3^{\circ}C$, respectively. The optimal water temperature for developmental bioassay of F. mutica was clarified to be $23^{\circ}C$. The required time for the embryo to become veliger larvae was 20 hours at $23^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.633-637
• /
• 2010

This study was conducted to evaluate various effects of kinds of culture medium, concentrations of abscisic acid (ABA) or /kinds of osmotica on maturation of somatic embryos (SEs) with four (LL-L, LL-K, LL-P and LL-N) embryogenic tissue lines (ETLs) in Japanese larch (Larix leptolepis). In comparison of two culture medium, the LL-P produced the highest number of the cotyledon-staged SE (134.9/90 mg tissue) in 1/2LM medium. In contrast, no SEs were obtained except the LL-P (32.9) in medium of BLG. Effects of two concentrations of ABA in the medium with four ETL for SEs maturation were also compared. In the test of 60 or 100 ${\mu}M$ ABA, the highest result was obtained in 60 ${\mu}M$ ABA (142.9). However, the influence of ABA had little on SEs production except the LL-N regardless of concentrations of ABA. In comparison of different kinds/concentrations of osmotica, the best response was obtained from the treatment of 0.2 M maltose, the LL-K (540.5). In conclusion, the effects of production of SEs were greatly rely on the ETLs, rather than kinds of medium, concentrations of ABA or osmotica which were used in maturation of SEs.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.249-254
• /
• 2022

Silkworms, which have for long been used as an insect resource for industrialization, have recently attracted attention as potential bio-factories for the production of novel biomaterials. In this regard, material production is typically achieved based on transformation technology, mediated via microinjection, in which a target gene is inserted into eggs containing an embryo. However, an essential step in the microinjection procedure is egg fixation, which can be a time-consuming and laborious task. Therefore, in this study, using the 3DCADian program, we adopted a 3D printing approach to model egg liners and glue drawers, which can contribute to facilitating egg alignment and fixation, thereby enhancing transformation efficiency by reducing time consumption and fatigue. After rendering using Fusion 360, the two supplementary tools were produced by printing with nylon resin (PA12) and Sinterit Lisa Pro. Subsequent analysis of the time required to fix eggs on glass slides using the two manufactured tools, revealed that the processing time was reduced by approximately 18.6% when the two tools were used compared with when these tools were not used. These innovations not only reduced fatigue but also contributed to more effective use of the microscope and manipulator for microinjection. Consequently, we believe that with additional research and refinement, the egg liner and glue drawer developed in this study could be used to enhance silkworm transformation efficiency and study similar transformation systems in other industrial insects.

• Korean Journal of Animal Reproduction
• /
• v.25 no.4
• /
• pp.305-315
• /
• 2001

In this study, the production of transgenic embryo was attempted by microinjection or round spermatid cultured with foreign DNA. At first, the expression of haploid spermatids specific gene, mTP1 in mouse and hPrm2 in hamster spermatids were investigated by RT-PCR method in testes of young mice and hamster testis. The specific gene expression first appeared at 18 days post partum (dpp) in mice spermatid and 20 dpp in hamster spermatid. Therefore, the round spermatids isolated from 17 dpp mice and 19 dpp hamster were used for the introduction of foreign EGFP gene into haploid round spermatids. For the introduction of EGFP gene haploid round spermatids suspended in medium including EGFP gene were treated with a different electric field strength at 0.11, 0.18 and 0.44 ㎸/cm. After electrical stimulation, viability of testicular sperm cells and 67.6%, 66.4% and 49.9%, in mice and 62.6%, 57.9% and 27% in hamster, respectively. These values were significantly lower than those of non-treated control groups 80.5% in mouse and 69.1% in hamster After 72 hrs culture, the highest expression rate of EGFP gene, 28.5% in mice and 32.1% in hamster were obtained from tile spermatogenic cells electroporated by the field strength or 0.18 ㎸/cm. Then, the ability of fertilization and embryonic development of haploid spermatids transfected with foreign EGFP gene were estimated by the microinjection of spermatids into hamster oocytes. The Irate pronuclear formation rate (77.5%) was lower than non-treated control (80%), and the cleavage rate of the treated group (58.8%) was lower than control (65%). To prove the foreign EGFP integration in hamster embryos, 2-cell stage hamster embryos were subjected to the observation under the fluorescence microscope, and the PCR analysis. As a result, about 44% of 2-cell embryos were showed the integration of EFGP gene into their genome. Therefore, These results suggest the possibility to produce transgenic hamsters by microinjection of haploid spermatid transfected with foreign DNA.

• Journal of Embryo Transfer
• /
• v.25 no.1
• /
• pp.15-20
• /
• 2010

This study was performed to identify the optimal timing for oocyte donor replacement during OPU procedure. OPU was carried out to collect oocytes from every donor at an interval of $3{\sim}4$ days (2 times a week). The collected oocytes were matured in vitro in TCM-199 supplemented with 10% FBS, 10 mg/ml of FSH and 1 mg/ml of estradiol for 24 h. After 24 h of exposure to sperm, the presumptive zygotes were cultured in CR1aa medium supplemented with 4 mg/ml of BSA for 3 days before being changed to CR1aa medium with 10% of FBS for another $3{\sim}4$ days. The mean numbers of retrieved oocytes were remained constantly up to 3 months ($6.0{\pm}0.5$, $6.2{\pm}0.7$, $5.2{\pm}0.6$), but significantly decreased at over 4 to 6 months ($3.7{\pm}0.5$, $2.8{\pm}0.4$, $1.2{\pm}0.2$) (p<0.05). The blastocyst development potential was also very similar rate from 1 to 3 months (37.2%, 40.4% and 44.6%), but significantly decreased from 4 to 6 months (24.8%, 29.3% and 28.6%, respectively) (p<0.05). The production of OPU derived embryos in periods of 1 to 3 months ($2.2{\pm}0.3$, $2.5{\pm}0.3$ and $2.3{\pm}0.4$) were significantly higher than those in 4 to 6 months ($0.9{\pm}0.2$, $0.8{\pm}0.2$ and $0.3{\pm}0.2$, respectively) (p<0.05). In conclusion, the efficient periods for the production of OPU derived embryos was until 4 months, twice per week to produce over 64 transferable embryos and then replace new donor after 3 months use. The best replacement time is 3 months and could be maximized production of OPU derived embryos.

• Journal of Embryo Transfer
• /
• v.19 no.2
• /
• pp.165-172
• /
• 2004

This study was carried out to examine the effects of maturation media on in vitro maturation (IVM) of porcine immature oocytes, and on subsequent in vitro fertilization (IVF) and development (IVD). Cumulus-oocyte complexes (COCs) were collected from antral follicles of porcine ovaries collected from abattoir, and were matured in vitro in modified NCSU-37 (mNCSU-37), modified NCSU-23 (mNCSU-23), or TCM-199 supplemented with 10% porcine follicular fluid (pFF). Oocytes matured in vitro, were fertilized in vitro in modified Tris-buffered medium(mTBM) with the final motile sperm concentration of 1${\times}$105 sperm/mL, and subsequently putative embryos were developed in vitro in NCSU-23. The results are as follows. 1. In the result of IVM, the rate of germinal vesicle breakdown (GVBD) and of nuclear maturation were not significantly different among the media, though numeric value of them were slightly lower in TCM-199 than in mNCSU-37 or in mNCSU-23. 2. In the result of IVF, though the rate of sperm penetration was not significantly different among the maturation media, the percentage of oocytes with male pronucleus (MPN) of ones matured in mNCSU-37 (88.0%) was significantly higher than in TCM-199 (71.1%) (p<0.05). 3. In the result of IVD, the percentage of cleaved oocytes of ones matured in mNCSU-37 (52.3%) or in mNCSU-23 (53.7%) was significantly higher than in TCM-199 (43.1%) (p<0.05), but the rate of blastocysts at day 6 was not significantly different among the maturation media, though putative embryos from oocytes matured in mNCSU-37 or in mNCSU-23 were developed more than in TCM-199. These results suggested that mNCSU-37 or mNCSU-23 was more appropriate than TCM-199 as IVM medium for porcine immature oocytes.