• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2569-2574
• /
• 2013

In 13.56MHz RFID system of Auto-ID center, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In STAC protocol, the reader uses the tag number estimation scheme to determine the number of slots for the next reply round. If errors occur in the estimated number of tags, the identification performances will be degraded due to a lot of collision or idle slots. Therefore, in this paper, we propose an ERPB algorithm that the reader cancels the reply round when it experiences a series of collision or idle slots during the current round. The transmission probability control for the tag is also applied to the proposed algorithm. Through simulations, it is demonstrated that the collision rate for the proposed scheme is about 39% lower than STAC protocol. Therefore, the proposed scheme can achieve faster tag identification time compared with STAC protocol due to the low collision rate.

• Journal of Korea Multimedia Society
• /
• v.16 no.7
• /
• pp.841-851
• /
• 2013

The infectious information hiding system(IIHS) is proposed for secure distribution of high quality video contents by applying optimized watermark embedding and detection algorithms to video codecs. And the watermark as infectious information is transmitted while target video is displayed or edited by codecs. This paper proposes a fast and effective reversible watermarking and infectious information generation for IIHS. Our reversible watermarking scheme enables video decoder to control video quality and watermark strength actively for by adding control code and expiration date with the watermark. Also, we designed our scheme with low computational complexity to satisfy it's real-time processing in a video codec, and to prevent time or frame delay during watermark detection and video restoration, we embedded one watermark and one side information within a macro-block. Experimental results verify that our scheme satisfy real-time watermark embedding and detection and watermark error is 0% after reversible watermark detection. Finally, we conform that the quality of restored video contens is almost same with compressed video without watermarking algorithm.

• Journal of Convergence for Information Technology
• /
• v.9 no.7
• /
• pp.25-32
• /
• 2019

This paper proposes the method of an in-vehicle gateway to reduce the reprogramming time for the ECU (Electronic Control Unit). In order to reduce the reprogramming time, the gateway must prohibit transmitting messages, that are not related to reprogramming, to the destination CAN network, and no ECU should diagnose the DTC(Diagnostic Trouble Code) that indicates CAN communication error caused by prohibiting CAN messages by the gateway. Moreover, STmin, which are the minimum time between two consecutive CAN messages, should be minimized. In order to do this, this paper proposes the method that uses the link control command specified in UDS(Unified Diagnostic Services) and hardware based gateway functionality that are supported by the latest MCU(Micro Controller Unit). The proposed method is developed using TC275 based embedded system, and its results are presented.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.661-674
• /
• 2009

Recently, there has been much research and many attempts to enhance converged information technology services using new technology such as ubiquitous sensor networks (USN) in medical, environmental, industrial, and logistic areas. There has also been much research and various attempts to apply this new technology to agricultural areas. However, applications to the agricultural areas should be considered differently against the same areas such as medical, environmental, industrial, and logistics. Therefore, this paper suggests that an agricultural cultivating management and traceability system. This system is a unified system that supports the processes sowing seeds through selling agricultural products to consumers. Farmers can be provided with an effective calendar for cultivation and weather information in real time as well as the monitoring of the growth of farm products on the farm in real time using this system. Farmers can also control all equipment installed on the farm directly or remotely and the equipment can be controlled automatically when the measured values such as temperature and humidity deviate from the decent criteria which are set by farmers or this system. Additionally, the reliability for and the better quality of the agricultural products can be improved because farmers can use this unified system to cover all processes from sowing seeds to selling to consumers.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.6
• /
• pp.106-112
• /
• 2012

As a fuel cell converts the chemical energy of the fuel cell into electrical energy by electrochemical reaction, the fuel cell system is uniquely integrated technique including fuel processor, fuel cell stack, power conditioning system. The residential fuel cell-PCS(Power Conditioning System) needs to convert efficiently the DC current produced by the fuel cell into AC current using single-phase DC-AC inverter. A single-phase DC-AC inverter has naturally low frequency ripple which is twice frequency of the output current. This low frequency(120Hz) ripple reduces the efficiency of the fuel cell. This paper presents notch filter with IP voltage controller to reject specific 120Hz current ripple in single-phase inverter. The notch filter is designed that suppress just only specific frequency component and no phase delay. Finally, the proposed notch filter design method has been verified with computer simulation and experimentation.

• Journal of Sensor Science and Technology
• /
• v.21 no.4
• /
• pp.241-248
• /
• 2012

Recently healthcare industry such as pharmaceutical, medical device and healthcare service technology is growing significantly. Mobile healthcare has attracted big attention due to IT convergence technology. Paradigm of healthcare has been changed from the 1st generation(communicable disease prevention) and the 2nd generation(treatment of disease due to extended life expectancy) to the 3rd generation(extended life expectancy due to prevention and control). In our study, we suggest the 3rd generation mobile healthcare system using Bluetooth based wearable ECG monitoring system and smart phone technology. The mobile healthcare system consists of wearable shirts with Bluetooth communication module, ECG sensor, battery, and mobile phone. The ECG data is obtained by a miniaturized sensor and the data is transferred to a mobile phone using Bluetooth communication. Then, user can monitor his/her own ECG signal on an application using Android in mobile phone. The Bluetooth communication device is used due to highly reliable data transmission property and the Bluetooth chip is embedded in every mobile phone. The wearable shirts with chest belt of Bluetooth ECG module is designed with a focus on convenience in the daily life of a wearer. The ECG signal evaluation software in Android based mobile phone is developed for the health check and the ECG signal variation is tested according to the activities of the wearer such as walking, climbing stairs, stand up and sit down, and so on.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.687-692
• /
• 2009

This paper presents the development of RFID educational system based on 900MHz air interface between the reader and the active tag. The software of reader and the active tag is developed on embedded environment, and the software of PC controlling the reader is based on window OS operated as the server. The ATmega128 VLSI chip is used for the processor of the reader and the active tag. As the development environment, AVR compiler is used for the reader and the active tag of which the programming language is C. The visual C++language of the visual studio on the PC activated as the server is used for development language. Main functions of this system are to control tag containing EPC global Data by PC through the reader, to obtain information of tag through the internet and to read/write data on tag memory. Software design of 900MHz RFID/USN educational system is done on the basis of these functions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.345-352
• /
• 2017

In this paper, we design and implement an educational robot system that can use scratch education with the function of user demanding to perform robot education in actual school site in an embedded environment. It is developed to enable physical education for sensing information processing, software design and programming practice training that is the basis of robotic system. The development environment of the system is Arduino Uno based product using Atmega 328 core, debugging environment based on Arduino Sketch, firmware development language using C language, OS using Windows, Linux, Mac OS X. The system operation process receives the control command of the server using the Bluetooth communication, and drives various sensors of the educational robot. The curriculum includes Scratch program and Bluetooth communication, which enables real-time scratch training. It also provides smartphone apps and is designed to enable education like C and Python through expansion. Teachers at the school site used the developed products and presented performance processing results satisfying the missionary needs of the missionaries.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.326-331
• /
• 2010

This paper has proposed and experimentally demonstrated a new BLU using an LED and an acryl, which is specially focused on the implementation about the guiding effect of an acryl luminous by the LED. While the conventional BLU using a fluorescent lamp is generally and widely used, it shows big power consumption with a short life even more too thick to hold on the wall. To solve such demerits, we propose a new method for a BLU using an LED and an acryl in this paper. This BLU system has various scratches on the surface of acryl to get diffusion effect of light, and has been included an embedded board that can dynamically control the colors and the intensity of the BLU through the Internet. We have conducted computer simulations to find out the optimal scratch pattern on the surface of the acryl for the backlight system. Based on the resulted out simulation. The the optimal scratch pattern signs has been developed. The simulation result shows 2,673Lux an average for a luminous intensity test, and the other hand, experiential result shows 2,554Lux. From the experiments, it is possible for the proposed BLU system to be used for real advertisements.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.3
• /
• pp.95-108
• /
• 2019

Quality management has become an pervasive philosophy in most sectors of business. Specific movements such as statistical quality control, quality circle, total quality management, and quality management system have become embedded in business organizations. Only the companies with competitive edge can survive in the competition in global market. KSA(Korean Standards Association) established in 1962 has launched all kinds of quality education, quality standard certification service for business, and KNQA(Korean National Quality Award) system. This article considers quality competitiveness excellent company award among KNQA. We performed a statistical analysis of audit data for quality competitiveness excellent company for three years, from 2015 to 2017. By using ANOVA and two sample t-tests, the average scores of 13 evaluation fields were significantly different depending on company size and type. We proposed ways to improve the current hall of fame system. We discovered that the average scores of 13 evaluation fields in the audit data according to years and hall of fame status were not significantly different. We also showed linear relationships among 13 evaluation fields by correlation analysis and obtained an estimated linear regression equation : Business Performance, which is a comprehensive index, as a dependent variable was significantly related to Customer Focus and Product Liability as regressor variables among 13 evaluation fields by regression analysis.