• Interaction and multiscale mechanics
• /
• 제4권4호
• /
• pp.321-336
• /
• 2011

This paper presents the results of static vertical load tests carried out on a model building frame supported by pile groups embedded in cohesionless soil (sand). The effect of soil interaction on displacements and rotation at the column base and also the shears and bending moments in the columns of the building frame were investigated. The experimental results have been compared with those obtained from the finite element analysis and conventional method of analysis. Soil nonlinearity in the lateral direction is characterized by the p-y curves and in the axial direction by nonlinear vertical springs along the length of the piles (${\tau}-z$ curves) at their tips (Q-z curves). The results reveal that the conventional method gives the shear force in the column by about 40-60%, the bending moment at the column top about 20-30% and at the column base about 75-100% more than those from the experimental results. The response of the frame from the experimental results is in good agreement with that obtained by the nonlinear finite element analysis.

• Wind and Structures
• /
• 제24권1호
• /
• pp.43-57
• /
• 2017

The use of nanotechnology materials and applications in the construction industry should be considered for enhancing material properties. However, the nonlinear buckling of an embedded straight concrete columns reinforced with silicon dioxide ($SiO_2$) nanoparticles is investigated in the present study. The column is simulated mathematically with Euler-Bernoulli and Timoshenko beam models. Agglomeration effects and the characteristics of the equivalent composite are determined using Mori-Tanaka approach. The foundation around the column is simulated with spring and shear layer. The governing equations are derived using energy method and Hamilton's principal. Differential quadrature method (DQM) is used in order to obtain the buckling load of structure. The influences of volume percent of $SiO_2$ nanoparticles, geometrical parameters and agglomeration on the buckling of column are investigated. Numerical results indicate that considering agglomeration effects leads to decrease in buckling load of structure.

• 콘크리트학회논문집
• /
• 제23권3호
• /
• pp.385-392
• /
• 2011

이 연구에서는 기존 철근콘크리트 건물의 보-기둥 접합부 및 내진 성능의 개선을 위해 보-기둥 접합부 영역을 기존의 강판 및 FRP보강재(탄소섬유 쉬트, 매입형 탄소섬유봉)를 사용하여 보강한 후 내진 성능을 평가 하였다. 총 6개의 실험체를 제작하고 실험을 수행하여 내진 성능을 평가하였으며, 이 연구의 실험 결과를 근거로 다음과 같은 결론을 얻었다. 기존 철근콘크리트 보-기둥 접합부의 접합부 영역(LBCJ 시리즈)를 보강한 결과 초기 재하시 접합부 영역의 균열 억제 효과와 재하 전 과정을 통하여 보강재의 구속 효과로 인하여 균열 억제 효과가 커서 안정적인 파괴 형태 및 내력 향상 효과를 나타내었다. 기존 철근콘크리트 보-기둥 접합부의 내진 성능을 개선하기 위하여 철근콘크리트 보-기둥 접합부 FRP보강 기술 적용 실험체 LBCJ 시리즈는 표준실험체 LBCJC와 비교하여 최대 내력은 26~50% 증가하였다. 그리고 에너지 소산 능력은 변위 연성 4에서 13.0~14.4% 증가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.19-20
• /
• 2013

Green Frame is a column-beam system constructed by composite precast column and beam connected by embedded steel of their. From when the precast concrete beam of Green Frame is installed, until the concrete of slab and connection joint is cured, the self load of beam shall be supported by the embedded steel of it. Therefore, the concrete of beam could be separated from the embedded steel if the shear connector of beam of Green Frame is designed by the code on Structural standard. So, this study suggest an equation for the shear connection of composite precast concrete beams of Green Frame. The result of this study will be used as the main equation of the calculation model for shear connectors of composite precast concrete beams.

• Journal of Information Processing Systems
• /
• 제11권3호
• /
• pp.389-405
• /
• 2015

Most traditional database systems exploit a record-oriented model where the attributes of a record are placed contiguously in a hard disk to achieve high performance writes. However, for read-mostly data warehouse systems, the column-oriented database has become a proper model because of its superior read performance. Today, flash memory is largely recognized as the preferred storage media for high-speed database systems. In this paper, we introduce a column-oriented database model based on flash memory and then propose a new column-aware flash indexing scheme for the high-speed column-oriented data warehouse systems. Our index management scheme, which uses an enhanced $B^+$-Tree, achieves superior search performance by indexing an embedded segment and packing an unused space in internal and leaf nodes. Based on the performance results of two test databases, we concluded that the column-aware flash index management outperforms the traditional scheme in the respect of the mixed operation throughput and its response time.

• Computers and Concrete
• /
• 제17권5호
• /
• pp.567-578
• /
• 2016

As concrete is most usable material in construction industry it's been required to improve its quality. Nowadays, nanotechnology offers the possibility of great advances in construction. For the first time, the nonlinear buckling of straight concrete columns armed with single-walled carbon nanotubes (SWCNTs) resting on foundation is investigated in the present study. The column is modelled with Euler-Bernoulli and Timoshenko beam theories. The characteristics of the equivalent composite being determined using mixture rule. The foundation around the column is simulated with spring and shear layer. Employing nonlinear strains-displacements, energy methods and Hamilton's principal, the governing equations are derived. Differential quadrature method (DQM) is used in order to obtain the buckling load of structure. The influences of volume percent of SWCNTs, geometrical parameters, elastic foundation and boundary conditions on the buckling of column are investigated. Numerical results indicate that reinforcing the concrete column with SWCNTs, the structure becomes stiffer and the buckling load increases with respect to concrete column armed with steel.

• Steel and Composite Structures
• /
• 제32권1호
• /
• pp.111-126
• /
• 2019

This paper deals with experimental investigation and modeling of the static behavior of a novel RCS beam-column exterior joint. The studied joint detail is a through-column type in which an H steel profile totally embedded inside RC column is directly welded to the steel beam. The H steel profile was covered by two supplementary plates in the joint area in order to avoid the stirrups resisting shear in the joint area. Two full-scale through-column-type RCS joints were tested under static loading. The objectives of the tests were to examine the connection performance and to highlight the contribution of two supplementary plates on the shear resistance of the joint. A reliable nonlinear 3D finite element model was developed using ABAQUS software to predict the response and behavior of the studied RCS joint. An extensive parametric study was performed to investigate the influences of the stirrups, the encased profile length and supplementary plate length on the behavior of the studied RCS joint.

• 대한전자공학회논문지SD
• /
• 제44권12호
• /
• pp.54-60
• /
• 2007

본 논문에서는 내장메모리의 고장을 효율적으로 치유하기 위해 2차원의 여분 메모리를 이용한 내장메모리의 자가치유회로를 제안한다. 내장메모리에 같은 행(열)에 다수의 고장이 발생할 경우에 기존의 1차원의 여분 열(행) 메모리를 이용할 경우에는 고장 수만큼의 여분 메모리 열(행)이 필요하나. 2차원의 메모리를 사용하는 본 방법에서는 하나의 여분 메모리 행(열)으로 치유가 가능하다. 또한, 가상분할 메모리방식을 이용함으로써 여분 메모리 열 전체가 아니라 부분 열을 이용하여 치유가 가능하다. 본 구조를 이용하여, $64\times1$ bit의 코어메모리와 $2\times8$의 2차원 여분 메모리로 구성된 자가치유회로를 설계한다. 그리고, 고장검출을 위해서 13N March 알고리즘을 가진 자가테스트회로를 내장한다. 매그너칩 $0.25{\mu}m$ CMOS공정을 이용하여 Full-Custom으로 설계한 결과, 10,658개의 Tr.수에 코어면적은 $1.1\times0.7mm^2$이 소요되었다.

• International Journal of Concrete Structures and Materials
• /
• 제2권1호
• /
• pp.63-68
• /
• 2008

High performance concrete (HPC) is widely used in civil engineering due to its high durability and low permeability etc. Compared with ordinary concrete, HPC may develop much higher AS (autogenous shrinkage) at early age due to the relative low water cement (w/c) ratio and adding of mineral admixtures, which is one of the main reasons for early age micro-cracking of HPC structures. This paper studies the early age property of HPC columns under similar construction-site surroundings by embedded strain transducers. Results show that for HPC structure, early-age autogenous shrinkage especially within the first day after concrete pouring is pretty large. AS within the first day are 60% larger than those for 14 days in this research for all specimens. Therefore it should be taken into account for structure durability. By comparison of PHPC (plain HPC column) and RHPC (reinforced HPC column) specimens, the effects of reinforced bars on AS and temperature distribution have been analyzed. Also the influence of w/c ratio on AS is demonstrated.

• 대한임베디드공학회논문지
• /
• 제11권5호
• /
• pp.277-285
• /
• 2016

Moving object detection system has been an emerging research field in various advanced driver assistance systems (ADAS) and surveillance system. In this paper, we propose two optical flow based moving object detection methods at dynamic scenes. Both proposed methods consist of three successive steps; pre-processing, foreground segmentation, and post-processing steps. Two proposed methods have the same pre-processing and post-processing steps, but different foreground segmentation step. Pre-processing calculates mainly optical flow map of which each pixel has the amplitude of motion vector. Dense optical flows are estimated by using Farneback technique, and the amplitude of the motion normalized into the range from 0 to 255 is assigned to each pixel of optical flow map. In the foreground segmentation step, moving object and background are classified by using the optical flow map. Here, we proposed two algorithms. One is Gaussian mixture model (GMM) based background subtraction, which is applied on optical map. Another is adaptive thresholding based foreground segmentation, which classifies each pixel into object and background by updating threshold value column by column. Through the simulations, we show that both optical flow based methods can achieve good enough object detection performances in dynamic scenes.