• 한국게임학회 논문지
• /
• 제4권3호
• /
• pp.65-70
• /
• 2004

모바일 기기에 대한 다양한 멀티미디어 기능의 요구로 입체감을 제공하는 3차원 그래픽 가속기의 구현이 절실한 상황이다. 하지만 다양한 멀티미디어 기능을 가져야 하는 최근의 휴대폰의 경향과 상대적으로 발전이 더딘 배터리의 문제를 생각할 때 3차원 그래픽 가속기의 저전력화는 필수적이라고 할 수 있다. 이에 본 논문에서는 내장형 3차원 그래픽 가속기 각 내부모듈별 전력소비를 측정하고 이를 내부 그래픽 처리과정과 함께 분석하였다.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.539-545
• /
• 2010

Through the AUTOSAR methodology, the embedded software shall become more flexible, reusable, maintainable than ever. However, it is not mentioned about specific timing constraints of software components in AUTOSAR. There are a few basic principles for mapping runnable entities. At this point, AUTOSAR software design with optimal scheduling method is one of the enabling technologies in vehicle embedded system. This paper presents an approach based on mapping runnable entities and task scheduling design method for EPS (Electric Power Steering) software components, based on AUTOSAR. In addition, the experimental results of concurrent simulation show that the proposed scheduling technique and timing synchronization in the software component design can achieve the improved torque ripple performance and it well suited for EPS application software.

• ETRI Journal
• /
• 제29권4호
• /
• pp.463-469
• /
• 2007

A phase-locked loop (PLL) is described which is operable from 0.4 GHz to 1.2 GHz. The PLL has basically the same architecture as the conventional analog PLL except the locking information is stored as digital code. An analog-to-digital converter is embedded in the PLL, converting the analog loop filter output to digital code. Because the locking information is stored as digital code, the PLL can be turned off during power-down mode while avoiding long wake-up time. The PLL implemented in a 0.18 ${\mu}m$ CMOS process occupies 0.35 $mm^2$ active area. From a 1.8 V supply, it consumes 59 mW and 984 ${\mu}W$ during the normal and power-down modes, respectively. The measured rms jitter of the output clock is 16.8 ps at 1.2 GHz.

• 한국정보과학회논문지:시스템및이론
• /
• 제33권9호
• /
• pp.642-649
• /
• 2006

지능형 서비스를 제공하는 환경에서 상황을 인식하기 위하여 임베디드 시스템이 갖는 제한적인 리소스와 컴퓨팅 파워 환경에 적합한 상태 전이 기반 상황 표현 모델을 제안하고, 이를 인식하는 상황 인식기와 제어 신호를 발생시키는 동작 발생기를 결합한 임베디드 시스템에 탑재하기에 적합한 상황-동작 변환기(SAC)를 설계하였다. 또한 ARM 프로세서 기반의 임베디드 보드에 설계된 상황-동작 변환기를 응용한 상황 관리기를 구현하여 이를 스마트 스케줄러 서비스에 활용하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.388-394
• /
• 2015

The inrush current of a large inductive load can be reduced with a soft starter; however, the large inrush current caused by simultaneous bulk starts (SBSs) cannot be effectively reduced. In order to reduce the high inrush current and voltage sag owing to the SBSs of large capacity inductive loads within a power network, a novel hybrid sequential start control system is proposed, implemented on embedded systems, and evaluated with a testbed in this study. From the experimental and simulation results of the proposed control system, the inrush current could be effectively restricted below the maximum current capacity of a power distributing board. Moreover, with the proposed system, power cost typically dictated by the peak power consumption can be fairly reduced, and the quality of the power system connected to the inductive loads can be efficiently increased.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1827-1834
• /
• 2016

This paper presents a high efficient generator with PM(Permanent Magnet) exciter. The proposed PM exciter for the generator can produce a linear output voltage according to the engine speed. This output voltage is directly used to control the field current of the generator to adjust the generator output voltage. In the proposed generator system, since the field winding current can be supplied by the PM exciter, the generator can self-start without any battery or an external power supply due to the low residential flux. Furthermore, the operating efficiency of the generator is higher than a conventional winding exciter. The main problem of the proposed generator system, the field winding current controller has to be embedded inside the generator, and it rotates according to the generator shaft. In this paper, the proper embedded current controller is designed for the proposed generator system. Due to the embedded controller cannot be connected to the outside the generator controller, the measured instantaneous output voltage of the generator is transferred by the photo isolated communication using shaft aligned infrared transmitter and receiver to keep the constant generator output voltage. In this paper, 10kW, 380V engine generator with PM exciter and the embedded DAVR(Digital Automatic Voltage Regulator) are described. The proposed high efficiency generator is simulated and tested to verify the effectiveness.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.16-21
• /
• 2011

Since the maximum power operating point(MPOP) of PCS alters with changing atmospheric conditions temperature conditions shadow conditions it is important to operate for PCS to keep maximum power point tracking(MPPT) continuously. This paper presents the results of modeling PV system by PSIM simulator and investigates the influence on the PV system from aspect of power quality i.e. voltage drop. This paper investigates four MPPT algorithms; Perturbation & Observation(P&O) Improved P&O Incremental Conductance(Incond) Differential coefficient method simulated with irradiation temperature change and shadow conditions.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권1호
• /
• pp.29-34
• /
• 2017

Over the past several decades, embedded system and flight control computer technologies have been evolved to meet the diverse needs of the mobile device market. Current embedded systems are at the heart of technologies that can take advantage of small-sized specialized hardware while still providing high-efficiency performance at low cost. One of these key technologies is multiple memory banks. For example, a dual memory bank can provide two times more memory bandwidth in the same memory space. This benefit take lower cost to provide the same bandwidth. However, there is still few software technologies to support the efficient use of multiple memory banks. In this study, we present a technique to efficiently exploit multiple memory banks by software support. Specifically, our technique use an interference graph to optimally allocate data to different memory banks by an optimizing compiler. As a result, the execution time can be improved upto 7% with the proposed technique.

• 스마트미디어저널
• /
• 제7권1호
• /
• pp.37-44
• /
• 2018

임베디드 기기는 시퀀스 제어 기능과 수치연산 기능을 활용하여 제어 프로그램에 따라 산업현장의 기기 등 다양한 자동화 시스템에 활용된다. 현재 임베디드 기기는 기업의 산업현장, 원전, 대중교통 같은 국가기반시설에서 제어 시스템으로 활용되고 있다. 따라서 임베디드 기기를 대상으로 하는 공격은 큰 경제적 손실과 사회적 손실을 야기할 수 있다. 임베디드 기기를 대상으로 하는 공격은 대부분 데이터, 코드 변조로서 제어 프로그램을 대상으로 이루어진다. 산업 자동화 임베디드 기기의 제어 프로그램은 일반적인 프로그래밍 언어와 달리 회로 구조를 표현하기 위하여 설계되었고, 대부분의 산업 자동화 제어 프로그램은 그래픽 기반 언어인 LAD로 설계되어있어 정적분석이 용이하지 않다. 이러한 특징으로 인하여 산업 자동화 제어 프로그램에 대한 취약점 분석 및 보안 관련 연구는 정형 검증, 실시간 모니터링 수준에 그친다. 또한 사전에 취약점을 탐지하고 공격에 대한 대비가 가능한 산업 자동화 제어 프로그램 정적분석 연구는 매우 저조한 실정이다. 따라서 본 연구에서는 산업 자동화 임베디드 프로그램에 대한 정적분석 효율성 증대를 위하여 회로 구조를 표현하기 위해 설계된 산업 자동화 제어 프로그램을 논리식으로 표현하기 위한 방법을 제시한다. 또한 다양한 제조사의 산업 자동화 제어 프로그램을 통합적으로 분석하기 위하여 LLVM IR을 활용한 중간어 변환 기술을 제안한다. LLVM IR을 활용함으로서 동적 분석에 대한 통합분석이 가능하다. 본 연구에서는 해당 방법에 대한 검증을 위하여 S 사(社)의 제어 프로그램을 대상으로 하여 논리식 형태의 중간어로 변환하는 프로그램의 시제품을 개발하였다.

• 전력전자학회논문지
• /
• 제3권4호
• /
• pp.338-345
• /
• 1998

The mathematical interpretation of a practical sampler which is useful to obtain the small signal models for the peak and average current mode controls is proposed. Due to the difficulties in applying the Shannons sampling theorem to the analysis of sampling effects embedded in the current mode control, several different approaches have been reported. However, these approaches require the information of the inductor current in a discrete expression, which restricts the application of the reported method only to the peak current mode control. In this paper, the mathematical expressions of sampling effects on a current loop which can directly apply the Shannons sampling theorem are newly proposed, and applied to the modeling of the peak current mode control. By the newly derived models of a practial smapler, the models in a discrete time domain and a continuous time domain are obtained. It is expected that the derived models are useful for the control loop design of power supplies. The effectiveness of the derived models are verified through the simulation and experimental results.