• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.677-686
• /
• 2002

Recently, the Open-Development-Tool-Environment becomes a basic requirement of RTOS (Real Time Operating System) for embedded systems with restricted memory and CPU power in order to develop applications effectively. A remote interactive shell is one of the basic software components which makes users develop, test and control softwares without burdening target systems. In this paper, we have implemented the remote interactive shell with the following functions : loading object modules, spawning and manipulating tasks facilities thru a remote host. Comparing information reference methods with nonredundant overhead, we have achieved the system with easy maintenance. The shell has been developed with Q-PLUS RTOS under ARM EBSA285 target board and NT host.

• KIISE Transactions on Computing Practices
• /
• v.21 no.10
• /
• pp.639-644
• /
• 2015

The capacity of flash-based storage such as Solid State Drive(SSD) and embedded Multi Media Card(eMMC) is ever-increasing because of the needs from the end-users. However, if a flash-based storage crashes, such as during power failure, the flash translation layer(FTL) is responsible for the crash recovery based on the entire flash memory. The recovery time increases as the capacity of the flash-based storages increases. We propose O1FTL with O(1) crash recovery time that is independent of the flash capacity. O1FTL adopts the working area technique suggested for the flash file system and evaluates the design on a real hardware platform. The results show that O1FTL achieves a crash recovery time that is independent of the capacity and the overhead, in terms of I/O performance, and achieves a low P/E cycle.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.675-687
• /
• 2010

Structural Health Monitoring (SHM) is the science and technology of monitoring and assessing the condition of aerospace, civil and mechanical infrastructures using a sensing system integrated into the structure. Impedance-based SHM measures impedance of a structure using a PZT (Lead Zirconate Titanate) patch. This paper presents a low-power wireless autonomous and active SHM node called Autonomous SHM Sensor 2 (ASN-2), which is based on the impedance method. In this study, we incorporated three methods to save power. First, entire data processing is performed on-board, which minimizes radio transmission time. Considering that the radio of a wireless sensor node consumes the highest power among all modules, reduction of the transmission time saves substantial power. Second, a rectangular pulse train is used to excite a PZT patch instead of a sinusoidal wave. This eliminates a digital-to-analog converter and reduces the memory space. Third, ASN-2 senses the phase of the response signal instead of the magnitude. Sensing the phase of the signal eliminates an analog-to-digital converter and Fast Fourier Transform operation, which not only saves power, but also enables us to use a low-end low-power processor. Our SHM sensor node ASN-2 is implemented using a TI MSP430 microcontroller evaluation board. A cluster of ASN-2 nodes forms a wireless network. Each node wakes up at a predetermined interval, such as once in four hours, performs an SHM operation, reports the result to the central node wirelessly, and returns to sleep. The power consumption of our ASN-2 is 0.15 mW during the inactive mode and 18 mW during the active mode. Each SHM operation takes about 13 seconds to consume 236 mJ. When our ASN-2 operates once in every four hours, it is estimated to run for about 2.5 years with two AAA-size batteries ignoring the internal battery leakage.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.267-276
• /
• 2021

The automotive industry and academic research have been continuously conducting research on standardization such as AUTOSAR (AUTomotive Open System ARchitecture) and ISO26262 to solve problems such as safety and efficiency caused by the complexity of electric/electronic architecture of automotive. AUTOSAR is an automotive standard software platform that has a layered structure independent of MCU (Micro Controller Unit) hardware, and improves product reliability through software modularity and reusability. And, ISO26262, an international standard for automotive functional safety and suggests a method to minimize errors in automotive ECU (Electronic Control Unit)s by defining the development process and results for the entire life cycle of automotive electrical/electronic systems. These design methods are variously applied in representative automotive safety-critical systems. However, since the functional and safety requirements are different according to the characteristics of the safety-critical system, it is essential to research the AUTOSAR functional safety design method specialized for each application domain. In this paper, a software functional safety mechanism design method using AUTOSAR is proposed, and a new failure management framework is proposed to ensure the high reliability of the product. The AUTOSAR functional safety mechanism consists of memory partitioning protection, timing monitoring protection, and end-to-end protection. The fault management framework is composed of several safety SWCs to maintain the minimum function and performance even if a fault occurs during the operation of a safety-critical system. Finally, the proposed method is applied to the Shift-by-Wire system design to prove the validity of the proposed method.

• Convergence Security Journal
• /
• v.21 no.2
• /
• pp.29-35
• /
• 2021

UART (Universal asynchronous receiver/transmitter) is a hardware device that converts data into serial format and transmits it, and is widely used for system diagnosis and debugging in most embedded systems. Hackers can access system memory or firmware by using the functions of UART, and can take over the system by acquiring administrator rights of the system. In this paper, we studied secure UART to protect against hacker attacks through UART. In the proposed scheme, only authorized users using the promised UART communication protocol are allowed to access UART and unauthorized access is not allowed. In addition, data is encrypted and transmitted to prevent protocol analysis through sniffing. The proposed UART technique was implemented in an embedded Linux system and performance evaluation was performed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.850-858
• /
• 2022

To deploy Gate Recurrent Units (GRU) on resource-constrained embedded devices, this paper presents a reconfigurable FPGA-based GRU accelerator that enables structured compression. Firstly, a dense GRU model is significantly reduced in size by hybrid quantization and structured top-k pruning. Secondly, the energy consumption on external memory access is greatly reduced by the proposed reuse computing pattern. Finally, the accelerator can handle a structured sparse model that benefits from the algorithm-hardware co-design workflows. Moreover, inference tasks can be flexibly performed using all functional dimensions, sequence length, and number of layers. Implemented on the Intel DE1-SoC FPGA, the proposed accelerator achieves 45.01 GOPs in a structured sparse GRU network without batching. Compared to the implementation of CPU and GPU, low-cost FPGA accelerator achieves 57 and 30x improvements in latency, 300 and 23.44x improvements in energy efficiency, respectively. Thus, the proposed accelerator is utilized as an early study of real-time embedded applications, demonstrating the potential for further development in the future.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.542-558
• /
• 2023

A digital focus index (DFI) is a value used to determine image focus in scientific apparatus and smart devices. Automatic focus (AF) is an iterative and time-consuming procedure; however, its processing time can be reduced using a general processing unit (GPU) and a multi-core processor (MCP). In this study, parallel architectures of a minimax search algorithm (MSA) are applied to two DFIs: range algorithm (RA) and image contrast (CT). The DFIs are based on a histogram; however, the parallel computation of the histogram is conventionally inefficient because of the bank conflict in shared memory. The parallel architectures of RA and CT are constructed using parallel reduction for MSA, which is performed through parallel relative rating of the image pixel pairs and halved the rating in every step. The array size is then decreased to one, and the minimax is determined at the final reduction. Kernels for the architectures are constructed using open source software to make it relatively platform independent. The kernels are tested in a hexa-core PC and an embedded device using Lenna images of various sizes based on the resolutions of industrial cameras. The performance of the kernels for the DFIs was investigated in terms of processing speed and computational acceleration; the maximum acceleration was 32.6× in the best case and the MCP exhibited a higher performance.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.455-466
• /
• 2006

This study was an attempt to control and monitor Computerized Numerical Controller (CNC) machines anywhere and anytime for the development of a ubiquitous machine (u-machine). With a Personal Digital Assistant (PDA) phone, the machine status and machining data of CNC machines can be monitored in wired and wireless environments, including the environments of IMT2000 and Wireless LAN. Moreover, CNC machines can be controlled anywhere and anytime. The concept of the anywhere-anytime controlling and monitoring of a manufacturing system was implemented in this study for the purpose of u-manufacturing and u-machines. In this concept, the communication between the CNC controller and the PDA phone was successfully performed anywhere and anytime for the real-time monitoring and control of CNC machines. In addition, the interface between the CNC controller and the developed application module was implemented by Object linking and embedding for Process Control (OPC) and shared CNC memory. For communication, the design of a server contents module within the target CNC was based on a TCP/IP. Furthermore, the client contents module within the PDA phone was designed with the aid of embedded c++ programming for mobile communication. For the interface, the monitoring data, such as the machine status, the machine running state, the name of the Numerical Control (NC) program, the alarm and the position of the stage axes, were acquired in real time from real machines with the aid of the OPC method and by sharing the CNC memory. The control data, such as the start, hold, emergency stop, reserved start and reserved stop, were also applied to the CNC domain of the real machine. CNC machines can therefore be controlled and monitored in real time, anywhere and anytime. Moreover, prompt notification from CNC machines to mobile phones, including cellular phones and PDA phones, can be automatically realized in emergencies.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.4
• /
• pp.304-310
• /
• 2017

In this paper, we propose the architecture of an IPM based lane detector for autonomous vehicles to detect and control the driving route along the curved lane. In the IPM image, we divide the area into two fields, Far/Near Field, and the lane candidate region is detected using the Hough transform to perform the matching for the curved lane. In autonomous vehicles, various algorithms must be embedded in the system. To reduce the system resources, we proposed a method to minimize the number of memory accesses to the image and various parameters on the external memory. The proposed circuit has 96% lane recognition rate and occupies 16% LUT, 5.9% FF and 29% BRAM in Xilinx XC7Z020. It processes Full-HD image at a rate of 42 fps at a 100 MHz operating clock.

• Journal of Information Processing Systems
• /
• v.2 no.2
• /
• pp.76-81
• /
• 2006

A PDA is used mainly for downloading data from a stationary server such as a desktop PC in an infrastructure network based on wireless LAN. Thus, the overall performance depends heavily on the performance of such downloading with PDA. Unfortunately, for a PDA the time taken to receive data from a PC is longer than the time taken to send it by 53%. Thus, we measured and analyzed all possible factors that could cause the receiving time of a PDA to be delayed with a test bed system. There are crucial factors: the TCP window size, file access time of a PDA, and the inter-packet delay that affects the receiving time of a PDA. The window size of a PDA during the downstream is reduced dramatically to 686 bytes from 32,581 bytes. In addition, because flash memory is embedded into a PDA, writing data into the flash memory takes twice as long as reading the data from it. To alleviate these, we propose three distinct remedies: First, in order to keep the window size at a sender constant, both the size of a socket send buffer for a desktop PC and the size of a socket receive buffer for a PDA should be increased. Second, to shorten its internal file access time, the size of an application buffer implemented in an application should be doubled. Finally, the inter-packet delay of a PDA and a desktop PC at the application layer should be adjusted asymmetrically to lower the traffic bottleneck between these heterogeneous terminals.