• 한국결정학회지
• /
• 제12권3호
• /
• pp.162-165
• /
• 2001

The EDL (Embedded DRAM and Logic) technologies with stack cell capacitors based on NO dielectric and Co-silicided source/drain junctions using a Ti capping material, were successfully implemented. The employed Co-silicided film exhibited junction leakage characteristics comparable to those of non-silicided junctions. Improved device characteristics without degradation of I/sub off/ was also achieved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.305-306
• /
• 2007

This paper proposes an automatic conversion method from floating-point value computations to fixed-point value computations for implementing automatic speech recognition (ASR) algorithms in embedded device.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅲ
• /
• pp.1601-1604
• /
• 2003

본 논문에서는 PDA. Hand PC(HPC)등과 같은 모바일 단말에 운영체제로써 Embedded Linux를 채택하였을 경우 고려해야 할 Hardware 사양, I/O interrupt latency에 따른 성능. 스케줄링 정책에 따른 성능에 대하여 논한다. 대상 타겟으로 사용한 HPC 의 하드웨어 사양에 설명하고, Embedded Linux와의 연동에 있어서 문제점을 살펴본다. 또한 각종 I/O device들의 Interrupt latency에 따른 성능저하와 스케줄링 정책에 의한 성능저하에 대하여 분석하고. 해결 방안에 대하여 논한다. 마지막으로 실제 예로서 Mobile IPv6 S/W Stack을 이용한 실제 검증을 수행하고 성능 향상 방안을 제시한다.

• 대한임베디드공학회논문지
• /
• 제1권2호
• /
• pp.56-63
• /
• 2006

In this paper, we propose the integrated security management framework supporting the trust for the ubiquitous environments. The proposed framework provides the gathering and analysis of the security related information including the location of mobile device and then dynamically configures the security policy and adopts them. More specially, it supports the authentication and delegation service to support the trusted security management for the ubiquitous networks. This system also provides the visible management tools to give the convenient view for network administrator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.711-713
• /
• 2004

In the past time, the protection relay did only a protection function. Currently, its upgraded device i.e. IED(Intelligent Electric Device) has been designed to protect, control, and monitor the whole power system automatically. Also the device is desired to successfully measure important elements of the power system. This paper considers design method of a digital protection IED with a function of measuring various elements and a communication function. The protection IED is composed of the specific function modules that are signal process module, communication module, input/output module and main control module. A signal process module use a DSP processor for analysis of input signal. Main control module use a embedded processor, Xscale, that has an ARM Core. The communication protocol uses IEC61850 protocol that becomes standard in the future. The protection IED is able to process mass information with high-performance processor. As each function module is designed individually, the reliability of the device can be enhanced.

• 대한임베디드공학회논문지
• /
• 제16권6호
• /
• pp.313-321
• /
• 2021

The global market for medical devices is huge, and it will continue showing remarkable growth in the future. However, due to the entry barrier to develop medical devices, many domestic companies have technical problems in entering the medical device industry. In this paper, we introduce an open platform that can help with research and development for companies in the healthcare industry. This open platform consists of a hardware part and a software part. A hardware part is combined into CPU, base and other modules that are easy to replace and assemble. A software part is based on application software for development developed by Bionet. We test the performance of the open medical device platform using a biosignal processing algorithm.

• 대한임베디드공학회논문지
• /
• 제18권1호
• /
• pp.9-17
• /
• 2023

This paper relates to the development of a device for measuring the efficiency of a solar panel based on a variable constant current, and proposed a standard for reuse of the solar panel. By applying a variable constant current circuit to a solar panel efficiency measuring device, it was easy to apply a maximum power point tracking (MPPT) algorithm. In addition, a load dispersion method was applied to measure the efficiency of a high-capacity solar panel. and it is possible to solve a problematic thermal runaway during a MOSFET parallel operation by applying the load dispersion method. As a result of the experiment, the solar panel efficiency measuring device was able to accommodate a large solar panel of 350W, which is the maximum measurement goal. In this paper, the validity was confirmed through the 310W solar panel efficiency measurement experiment collected after removal.

• 대한임베디드공학회논문지
• /
• 제8권1호
• /
• pp.61-67
• /
• 2013

Wheelchair users have a difficulty in managing their weight because there is lack of measure systems and even though the users have the system, it costs too much. Thus, purpose of this study is for developing the portable weight scale automatic device to help wheelchair users by monitoring their weight on the wheelchairs in real time. Portable weight scale automatic device composed by four strain gauges, and the device was connected with mobile phone so that wheelchair users were able to check their weight in real time. In order to evaluate the device performance, 10 normal subjects and 10 disabled subjects participated in this study. The subjects' truth weight and measured weight by the device are compared. The weigh difference within normal subjects was $0.75{\pm}0.80kg$, and the weigh difference within disabled subjects was $1.02{\pm}0.74kg$. Difference between the truth weigh and the measured weigh were not statistically different. The reason for this error occurred is inaccuracy of the loadcell installation and calibration. If this problems get solved, the measured indicator is expected to help wheelchair users to manage their weight.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권2호
• /
• pp.240-253
• /
• 2012

In this paper we propose a protection mechanism for the debug port. While debug ports are useful tools for embedded device development and maintenance, they can also become potential attack tools for device hacking in case their usage is permitted to hackers with malicious intentions. The proposed approach prevents illicit use of debug ports by controlling access through user authentication, where the device generates and issues authentication token only to the server-authenticated users. An authentication token includes user access information which represents the user's permitted level of access and the maximum number of authentications allowed using the token. The device authenticates the user with the token and grants limited access based on the user's access level. The proposed approach improves the degree of overall security by removing the need to expose the device's secret key. Availability is also enhanced by not requiring server connection after the initial token generation and further by supporting flexible token transfer among predefined device groups. Low implementation cost is another benefit of the proposed approach, enabling it to be adopted to a wide range of environments in demand of debug port protection.

• 전자공학회논문지CI
• /
• 제45권3호
• /
• pp.75-85
• /
• 2008

임베디드 시스템에서 데이터베이스의 사용이 증가하고 있으며 이의 임베디드 시스템의 저장 장치로 낸드 플래시 메모리가 널리 사용되고 있다. 기존 데이터베이스 시스템의 질의 처리기의 최적화기는 저장 시스템을 디스크로 가정하고 설계되어 있다. 플래시 메모리는 디스크와는 달리 덮어 쓰기 연산을 하기 위해서는 기존 블록을 소거한 후 쓰기 연산을 해야하는 부담이 있다. 그러므로 기존 디스크 기반의 질의 최적화기는 임베디드 시스템에 적합하지 않다. 특히 임베디드 시스템은 전력 소모량을 최소화해야 하나 플래시에서의 빈번한 쓰기 연산은 추가적인 소거 연산으로 인한 전력 소비를 증진시킨다. 본 논문은 임베디드 데이터베이스에서 전력 기반 비용 모델을 새롭게 제시하고, 디스크 기반 비용 모델과 비교하여 제시한 비용 모델과의 차이를 보인다.